Performance analysis of diversity techniques in wireless communication systems: Cooperative systems with CCI and MIMO-OFDM systems

This Dissertation analyzes the performance of ecient digital commu- nication systems, the performance analysis includes the bit error rate (BER) of dier- ent binary and M-ary modulation schemes, and the average channel capacity (ACC) under dierent adaptive transmission protocols, namely, the simultaneous power and rate adaptation protocol (OPRA), the optimal rate with xed power protocol (ORA), the channel inversion with xed rate protocol (CIFR), and the truncated channel in- version with xed transmit power protocol (CTIFR). In this dissertation, BER and ACC performance of interference-limited dual-hop decode-and-forward (DF) relay- ing cooperative systems with co-channel interference (CCI) at both the relay and destination nodes is analyzed in small-scale multipath Nakagami-m fading channels with arbitrary (integer as well as non-integer) values of m. This channel condition is assumed for both the desired signal as well as co-channel interfering signals. In addition, the practical case of unequal average fading powers between the two hops is assumed in the analysis. The analysis assumes an arbitrary number of indepen- dent and non-identically distributed (i.n.i.d.) interfering signals at both relay (R) and destination (D) nodes. Also, the work extended to the case when the receiver employs the maximum ratio combining (MRC) and the equal gain combining (EGC) schemes to exploit the diversity gain

Performance Analysis of Non-Ideal MIMO Systems in Fading Channels

En esta tesis se aborda el análisis de prestaciones de sistemas MIMO bajo ciertas condiciones no ideales. Se han considerado limitaciones realistas como son las interferencias co-canal, el canal de retorno con velocidad limitada, y la correlación espacial entre antenas. Bajo estas condiciones, se han analizado las probabilidades de error y de outage para sistemas MIMO que incluyen técnicas de conformación de haz en el transmisor y/o distintas técnicas de diversidad espacial en el receptor. Con el fin de obtener expresiones cerradas y exactas par los indicadores de rendimiento mencionados, se han desarrollo nuevos métodos o herramientas matemáticas que facilitan o, en algunos casos, hacen posible el análisis. En primer lugar, se han obtenido nuevas expresiones cerradas para las integrales del tipo Lipschitz-Hankel y para la distribución de los elementos de la diagonal de matrices Wishart complejas. Posteriormente, estos resultados han sido aplicados al análisis de prestaciones de distintos sistemas MIMO en condiciones no-ideales. Concretamente, se han obtenido nuevas expresiones cerrradas de la probabilidad de outage para: sistemas MRC con interferencia co-canal, sistemas MIMO con correlación espacial entre antenas, y sistemas MIMO MRC con un canal de retorno limitado en velocidad. Además, se han obtenido expresiones cerradas para la probabilidad de error en sistemas de diversidad en recepción que emplean modulaciones no coherentes y no ortogonales

Error performance analysis of cross QAM and space-time labeling diversity for cross QAM.

Doctoral Degrees. University of KwaZulu-Natal, Durban.Abstract available in the PD

NLOS mitigation techniques in GNSS receivers based on Level Crossing Rates (LCR) of correlation outputs

Global Navigation Satellite Systems (GNSS) provide navigation services with a highly precise estimation of the position. First military influenced, the use of satellite-based positioning has gained a lot of interest also in civilian tasks nowadays. Because the GNSS performance has been improved over the years, the state-of-the-art GNSS navigation does include indoor positioning and moving autonomously with help of GNSS. The accuracy, which essentially has to be high, can be disturbed by multipath (e.g. diffraction, reflection, refraction or scattering). A possibility to detect multipath, and possibly to avoid those signals in the position solution, is totally necessary. A non-direct signal, namely Non-Light-of-Sight (NLOS), can lead to low accuracy of the positioning. Therefore, this thesis is dealing with the NLOS detection by using the Level Crossing Rate (LCR), which has been used in electronic communication such as Wifi. The thesis is divided in two parts, including a literature review part, following by a simulation of the developed detection technique. All basic knowledge about this work can be extracted from the literature part. In the simulation section, several tests will be provided, done by Matlab simulations. To perform a realistic GNSS signal, a dynamic Galileo Composite Binary Offset Carrier (CBOC) signal was produced

Three Branch Diversity Systems for Multi-Hop IoT Networks

Internet of Things (IoT) is an emerging technological paradigm connecting numerous smart objects for advanced applications ranging from home automation to industrial control to healthcare. The rapid development of wireless technologies and miniature embedded devices has enabled IoT systems for such applications, which have been deployed in a variety of environments. One of the factors limiting the performance of IoT devices is the multipath fading caused by reflectors and attenuators present in the environment where these devices are deployed. Leveraging polarization diversity is a well-known technique to mitigate the deep signal fades and depolarization effects caused by multipath. However, neither experimental validation of the performance of polarization diversity antenna with more than two branches nor the potency of existing antenna selection techniques on such antennas in practical scenarios has received much attention. The objectives of this dissertation are threefold. First, to demonstrate the efficacy of a tripolar antenna, which is specifically designed for IoT devices, in harsh environments through simulations and experimental data. Second, to develop antenna selection strategies to utilize polarized signals received at the antenna, considering the restrictions imposed due to resource limitations of the IoT devices. Finally, to conduct comparative analyses on the existing standard diversity techniques and proposed approaches, in conjunction with experimental data. Accordingly, this dissertation presents the testing results of tripolar antenna integrated with Arduino based IoT devices deployed in environments likely to be experienced by IoT devices in real life applications. Both simulation and experimental results from single point-to-point wireless links demonstrate the advantage of utilizing tripolar antennas in harsh propagation conditions over single branch antenna. Motivated by these empirical results, we deploy a small-scale IoT network with tripolar antenna based nodes to analyze the impact of tripolar antenna on neighbor nodes performance as well as to investigate end-to-end network performance. This work illustrates that the selection of antenna branches, while considering network architecture and the level of congestion on the repeater nodes, minimizes excessive antenna switching and energy consumption. Similar results are shown for IoT networks with predetermined and dynamic routing protocols, where the proposed techniques yielded lower energy consumption than the conventional diversity schemes. Furthermore, a probabilistic, low complexity antenna selection approach based on Hidden Markov model is proposed and implemented on wireless sensor nodes aiming to reduce energy consumption and improve diversity gain. Finally, we develop a dual-hop based technique where a node selects the antenna element for optimal performance based on its immediate network neighbors antenna configuration status during selection. The performance of the proposed technique, which is verified through simulation and measured data, illustrates the importance of considering network-wide evaluations of antenna selection techniques

High capacity multiuser multiantenna communication techniques

One of the main issues involved in the development of future wireless communication systems is the multiple access technique used to efficiently share the available spectrum among users. In rich multipath environment, spatial dimension can be exploited to meet the increasing number of users and their demands without consuming extra bandwidth and power. Therefore, it is utilized in the multiple-input multiple-output (MIMO) technology to increase the spectral efficiency significantly. However, multiuser MIMO (MU-MIMO) systems are still challenging to be widely adopted in next generation standards. In this thesis, new techniques are proposed to increase the channel and user capacity and improve the error performance of MU-MIMO over Rayleigh fading channel environment. For realistic system design and performance evaluation, channel correlation is considered as one of the main channel impurities due its severe influence on capacity and reliability. Two simple methods called generalized successive coloring technique (GSCT) and generalized iterative coloring technique (GICT) are proposed for accurate generation of correlated Rayleigh fading channels (CRFC). They are designed to overcome the shortcomings of existing methods by avoiding factorization of desired covariance matrix of the Gaussian samples. The superiority of these techniques is demonstrated by extensive simulations of different practical system scenarios. To mitigate the effects of channel correlations, a novel constellation constrained MU-MIMO (CC-MU-MIMO) scheme is proposed using transmit signal design and maximum likelihood joint detection (MLJD) at the receiver. It is designed to maximize the channel capacity and error performance based on principles of maximizing the minimum Euclidean distance (dmin) of composite received signals. Two signal design methods named as unequal power allocation (UPA) and rotation constellation (RC) are utilized to resolve the detection ambiguity caused by correlation. Extensive analysis and simulations demonstrate the effectiveness of considered scheme compared with conventional MU-MIMO. Furthermore, significant gain in SNR is achieved particularly in moderate to high correlations which have direct impact to maintain high user capacity. A new efficient receive antenna selection (RAS) technique referred to as phase difference based selection (PDBS) is proposed for single and multiuser MIMO systems to maximize the capacity over CRFC. It utilizes the received signal constellation to select the subset of antennas with highest (dmin) constellations due to its direct impact on the capacity and BER performance. A low complexity algorithm is designed by employing the Euclidean norm of channel matrix rows with their corresponding phase differences. Capacity analysis and simulation results show that PDBS outperforms norm based selection (NBS) and near to optimal selection (OS) for all correlation and SNR values. This technique provides fast RAS to capture most of the gains promised by multiantenna systems over different channel conditions. Finally, novel group layered MU-MIMO (GL-MU-MIMO) scheme is introduced to exploit the available spectrum for higher user capacity with affordable complexity. It takes the advantages of spatial difference among users and power control at base station to increase the number of users beyond the available number of RF chains. It is achieved by dividing the users into two groups according to their received power, high power group (HPG) and low power group (LPG). Different configurations of low complexity group layered multiuser detection (GL-MUD) and group power allocation ratio (η) are utilized to provide a valuable tradeoff between complexity and overall system performance. Furthermore, RAS diversity is incorporated by using NBS and a new selection algorithm called HPG-PDBS to increase the channel capacity and enhance the error performance. Extensive analysis and simulations demonstrate the superiority of proposed scheme compared with conventional MU-MIMO. By using appropriate value of (η), it shows higher sum rate capacity and substantial increase in the user capacity up to two-fold at target BER and SNR values

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion