GNSS Spoofing Detection via Opportunistic IRIDIUM Signals

In this paper, we study the privately-own IRIDIUM satellite constellation, to provide a location service that is independent of the GNSS. In particular, we apply our findings to propose a new GNSS spoofing detection solution, exploiting unencrypted IRIDIUM Ring Alert (IRA) messages that are broadcast by IRIDIUM satellites. We firstly reverse-engineer many parameters of the IRIDIUM satellite constellation, such as the satellites speed, packet interarrival times, maximum satellite coverage, satellite pass duration, and the satellite beam constellation, to name a few. Later, we adopt the aforementioned statistics to create a detailed model of the satellite network. Subsequently, we propose a solution to detect unintended deviations of a target user from his path, due to GNSS spoofing attacks. We show that our solution can be used efficiently and effectively to verify the position estimated from standard GNSS satellite constellation, and we provide constraints and parameters to fit several application scenarios. All the results reported in this paper, while showing the quality and viability of our proposal, are supported by real data. In particular, we have collected and analyzed hundreds of thousands of IRA messages, thanks to a measurement campaign lasting several days. All the collected data ($1000+$ hours) have been made available to the research community. Our solution is particularly suitable for unattended scenarios such as deserts, rural areas, or open seas, where standard spoofing detection techniques resorting to crowd-sourcing cannot be used due to deployment limitations. Moreover, contrary to competing solutions, our approach does not resort to physical-layer information, dedicated hardware, or multiple receiving stations, while exploiting only a single receiving antenna and publicly-available IRIDIUM transmissions. Finally, novel research directions are also highlighted.Comment: Accepted for the 13th Conference on Security and Privacy in Wireless and Mobile Networks (WISEC), 202

Signal classification at discrete frequencies using machine learning

Incidents such as the 2018 shut down of Gatwick Airport due to a small Unmanned Aerial System (UAS) airfield incursion, have shown that we don’t have routine and consistent detection and classification methods in place to recognise unwanted signals in an airspace. Today, incidents of this nature are taking place around the world regularly. The first stage in mitigating a threat is to know whether a threat is present. This thesis focuses on the detection and classification of Global Navigation Satellite Systems (GNSS) jamming radio frequency (RF) signal types and small commercially available UAS RF signals using machine learning for early warning systems. RF signals can be computationally heavy and sometimes sensitive to collect. With neural networks requiring a lot of information to train from scratch, the thesis explores the use of transfer learning from the object detection field to lessen this burden by using graphical representations of the signal in the frequency and time domain. The thesis shows that utilising the benefits of transfer learning with both supervised and unsupervised learning and graphical signal representations, can provide high accuracy detection and classification, down to the fidelity of whether a small UAS is flying or stationary. By treating the classification of RF signals as an image classification problem, this thesis has shown that transfer learning through CNN feature extraction reduces the need for large datasets while still providing high accuracy results. CNN feature extraction and transfer learning was also shown to improve accuracy as a precursor to unsupervised learning but at a cost of time, while raw images provided a good overall solution for timely clustering. Lastly the thesis has shown that the implementation of machine learning models using a raspberry pi and software defined radio (SDR) provides a viable option for low cost early warning systems

Enhancing service quality and reliability in intelligent traffic system

Intelligent Traffic Systems (ITS) can manage on-road traffic efficiently based on real-time traffic conditions, reduce delay at the intersections, and maintain the safety of the road users. However, emergency vehicles still struggle to meet their targeted response time, and an ITS is vulnerable to various types of attacks, including cyberattacks. To address these issues, in this dissertation, we introduce three techniques that enhance the service quality and reliability of an ITS. First, an innovative Emergency Vehicle Priority System (EVPS) is presented to assist an Emergency Vehicle (EV) in attending the incident place faster. Our proposed EVPS determines the proper priority codes of EV based on the type of incidents. After priority code generation, EVPS selects the number of traffic signals needed to be turned green considering the impact on other vehicles gathered in the relevant adjacent cells. Second, for improving reliability, an Intrusion Detection System for traffic signals is proposed for the first time, which leverages traffic and signal characteristics such as the flow rate, vehicle speed, and signal phase time. Shannon’s entropy is used to calculate the uncertainty associated with the likelihood of particular evidence and Dempster-Shafer (DS) decision theory is used to fuse the evidential information. Finally, to improve the reliability of a future ITS, we introduce a model that assesses the trust level of four major On-Board Units (OBU) of a self-driving car along with Global Positioning System (GPS) data and safety messages. Both subjective logic (DS theory) and CertainLogic are used to develop the theoretical underpinning for estimating the trust value of a self-driving car by fusing the trust value of four OBU components, GPS data and safety messages. For evaluation and validation purposes, a popular and widely used traffic simulation package, namely Simulation of Urban Mobility (SUMO), is used to develop the simulation platform using a real map of Melbourne CBD. The relevant historical real data taken from the VicRoads website were used to inject the traffic flow and density in the simulation model. We evaluated the performance of our proposed techniques considering different traffic and signal characteristics such as occupancy rate, flow rate, phase time, and vehicle speed under many realistic scenarios. The simulation result shows the potential efficacy of our proposed techniques for all selected scenarios.Doctor of Philosoph

Federated Learning in Intelligent Transportation Systems: Recent Applications and Open Problems

Intelligent transportation systems (ITSs) have been fueled by the rapid development of communication technologies, sensor technologies, and the Internet of Things (IoT). Nonetheless, due to the dynamic characteristics of the vehicle networks, it is rather challenging to make timely and accurate decisions of vehicle behaviors. Moreover, in the presence of mobile wireless communications, the privacy and security of vehicle information are at constant risk. In this context, a new paradigm is urgently needed for various applications in dynamic vehicle environments. As a distributed machine learning technology, federated learning (FL) has received extensive attention due to its outstanding privacy protection properties and easy scalability. We conduct a comprehensive survey of the latest developments in FL for ITS. Specifically, we initially research the prevalent challenges in ITS and elucidate the motivations for applying FL from various perspectives. Subsequently, we review existing deployments of FL in ITS across various scenarios, and discuss specific potential issues in object recognition, traffic management, and service providing scenarios. Furthermore, we conduct a further analysis of the new challenges introduced by FL deployment and the inherent limitations that FL alone cannot fully address, including uneven data distribution, limited storage and computing power, and potential privacy and security concerns. We then examine the existing collaborative technologies that can help mitigate these challenges. Lastly, we discuss the open challenges that remain to be addressed in applying FL in ITS and propose several future research directions

Advanced Location-Based Technologies and Services

Since the publication of the first edition in 2004, advances in mobile devices, positioning sensors, WiFi fingerprinting, and wireless communications, among others, have paved the way for developing new and advanced location-based services (LBSs). This second edition provides up-to-date information on LBSs, including WiFi fingerprinting, mobile computing, geospatial clouds, geospatial data mining, location privacy, and location-based social networking. It also includes new chapters on application areas such as LBSs for public health, indoor navigation, and advertising. In addition, the chapter on remote sensing has been revised to address advancements

Reliable Navigation for SUAS in Complex Indoor Environments

Indoor environments are a particular challenge for Unmanned Aerial Vehicles (UAVs). Effective navigation through these GPS-denied environments require alternative localization systems, as well as methods of sensing and avoiding obstacles while remaining on-task. Additionally, the relatively small clearances and human presence characteristic of indoor spaces necessitates a higher level of precision and adaptability than is common in traditional UAV flight planning and execution. This research blends the optimization of individual technologies, such as state estimation and environmental sensing, with system integration and high-level operational planning. The combination of AprilTag visual markers, multi-camera Visual Odometry, and IMU data can be used to create a robust state estimator that describes position, velocity, and rotation of a multicopter within an indoor environment. However these data sources have unique, nonlinear characteristics that should be understood to effectively plan for their usage in an automated environment. The research described herein begins by analyzing the unique characteristics of these data streams in order to create a highly-accurate, fault-tolerant state estimator. Upon this foundation, the system built, tested, and described herein uses Visual Markers as navigation anchors, visual odometry for motion estimation and control, and then uses depth sensors to maintain an up-to-date map of the UAV\u27s immediate surroundings. It develops and continually refines navigable routes through a novel combination of pre-defined and sensory environmental data. Emphasis is put on the real-world development and testing of the system, through discussion of computational resource management and risk reduction