Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

MPLS based recovery mechanisms

Multi-protocol label switching (MPLS) integrates the label swapping forwarding paradigm with network layer routing. To deliver reliable service, MPLS requires a set of procedures to provide protection of the traffic carried on different paths. This requires that the label switching routers (LSRs) support fault detection, fault notification, and fault recovery mechanisms, and that MPLS signaling supports the configuration of recovery. The purpose of this work is to evaluate the different recovery mechanisms proposed by the IETF, by literature study and simulation experiments

Extending OWns to include protection functionality

The objective of this dissertation is to enhance the functionality of an existing simulation package that is used to simulate fiber optic networks. These enhancements include the capability to simulate protection mechanisms following link failure, which is a necessity in real-world optical networks to ensure the continued flow of information following a failure in a part of the network. The capability for network traffic to choose from additional paths is also an addition to the software. The enhanced, as well as the original simulation software, are open source: this allows anyone to freely modify and improve the source code to suit his or her requirements. This dissertation will focus on mesh-based optical network topologies, which are commonly found in regional optical backbone networks, but which are also increasingly found in metropolitan areas. The regional networks all make use of wavelength division multiplexing (WDM), which consists of putting multiple different wavelengths of light on the same physical fiber. A single fiber breakage will therefore disrupt multiple fiber-optic connections. A fiber-optic network designer has to satisfy various conflicting requirements when designing a network: it must satisfy current and predicted future traffic requirements, it must be immune to equipment failure, but it must also be as inexpensive as possible. The network designer therefore has to evaluate different topologies and scenarios, and a good network simulator will provide invaluable assistance in finding an optimal solution. Protection and restoration need to be looked at in conjunction with routing and wavelength assignment (RWA), to ensure that resources in a network are used at maximum efficiency. Connection restoration time will also be looked at: this should be minimised to ensure minimal network downtime and ensuing loss of revenue. The chosen alternate connection path should also be as short as possible to minimise use of resources and maximise the carrying capacity of the network. Blocking probability (the inability to establish a connection due to a congested network) is a crucial factor and is also investigated. The topologies investigated in this dissertation consist of various mesh based real-world regional WDM fiber-optic networks. The impact of various link failures, the addition of additional alternate paths, as well as the effect of a protection mechanism on these topologies are also investigated. The proposed goals were all successfully achieved. The capability of simulating single as well as multiple link failures was introduced to the simulation package. The blocking probability of various network topologies was compared to each other in the presence of link failures. Success was also achieved in the introduction of a third alternate path to the simulation package.Dissertation (MEng(Electronic))--University of Pretoria, 2005.Electrical, Electronic and Computer Engineeringunrestricte

End-to-End Resilience Mechanisms for Network Transport Protocols

The universal reliance on and hence the need for resilience in network communications has been well established. Current transport protocols are designed to provide fixed mechanisms for error remediation (if any), using techniques such as ARQ, and offer little or no adaptability to underlying network conditions, or to different sets of application requirements. The ubiquitous TCP transport protocol makes too many assumptions about underlying layers to provide resilient end-to-end service in all network scenarios, especially those which include significant heterogeneity. Additionally the properties of reliability, performability, availability, dependability, and survivability are not explicitly addressed in the design, so there is no support for resilience. This dissertation presents considerations which must be taken in designing new resilience mechanisms for future transport protocols to meet service requirements in the face of various attacks and challenges. The primary mechanisms addressed include diverse end-to-end paths, and multi-mode operation for changing network conditions

Programmability and management of software-defined network infrastructures

In a landscape where software-based solutions are evermore central in the design, development and deployment of innovative solutions for communication networks, new challenges arise, related to how to best exploit the new solutions made available by technological advancements. The objective of this Thesis is to consolidate and improve some recent solutions for programmability, management, monitoring and provisioning in software-based infrastructures, as well as to propose new solutions for service deployment, management and monitoring over softwarized domains, along with working implementations, validating each point with punctual experimental validations and performance evaluations. The treatise starts by introducing the key concepts the research work is based upon, then the main research activities performed during the three years of PhD studies are presented. These include a high-level interface for network programmability over heterogeneous softwarized domains, an implementation of a protocol for service function chaining over non-programmable networks for multi-domain orchestration, a modular system for unified monitoring of softwarized infrastructures, a protocol for the employment of unused channels to augment the capabilities of the softwarized infrastructure, and a XaaS-aware orchestrator designed to operate over Fog computing scenarios