351 research outputs found
Performance Analysis and Enhancement of Multiband OFDM for UWB Communications
In this paper, we analyze the frequency-hopping orthogonal frequency-division
multiplexing (OFDM) system known as Multiband OFDM for high-rate wireless
personal area networks (WPANs) based on ultra-wideband (UWB) transmission.
Besides considering the standard, we also propose and study system performance
enhancements through the application of Turbo and Repeat-Accumulate (RA) codes,
as well as OFDM bit-loading. Our methodology consists of (a) a study of the
channel model developed under IEEE 802.15 for UWB from a frequency-domain
perspective suited for OFDM transmission, (b) development and quantification of
appropriate information-theoretic performance measures, (c) comparison of these
measures with simulation results for the Multiband OFDM standard proposal as
well as our proposed extensions, and (d) the consideration of the influence of
practical, imperfect channel estimation on the performance. We find that the
current Multiband OFDM standard sufficiently exploits the frequency selectivity
of the UWB channel, and that the system performs in the vicinity of the channel
cutoff rate. Turbo codes and a reduced-complexity clustered bit-loading
algorithm improve the system power efficiency by over 6 dB at a data rate of
480 Mbps.Comment: 32 pages, 10 figures, 1 table. Submitted to the IEEE Transactions on
Wireless Communications (Sep. 28, 2005). Minor revisions based on reviewers'
comments (June 23, 2006
Cross-layer Resource Allocation Scheme for Multi-band High Rate UWB Systems
In this paper, we investigate the use of a cross-layer allocation mechanism
for the high-rate ultra-wideband (UWB) systems. The aim of this paper is
twofold. First, through the cross-layer approach that provides a new service
differentiation approach to the fully distributed UWB systems, we support
traffic with quality of service (QoS) guarantee in a multi-user context.
Second, we exploit the effective SINR method that represents the
characteristics of multiple sub-carrier SINRs in the multi-band WiMedia
solution proposed for UWB systems, in order to provide the channel state
information needed for the multi-user sub-band allocation. This new approach
improves the system performance and optimizes the spectrum utilization with a
low cost data exchange between the different users while guaranteeing the
required QoS. In addition, this new approach solves the problem of the
cohabitation of more than three users in the same WiMedia channel
Spectrum control and iterative coding for high capacity multiband OFDM
The emergence of Multiband Orthogonal Frequency Division Modulation (MB-OFDM) as an ultra-wideband (UWB) technology injected new optimism in the market through realistic commercial implementation, while keeping promise of high data rates intact. However, it has also brought with it host of issues, some of which are addressed in this thesis.
The thesis primarily focuses on the two issues of spectrum control and user capacity for the system currently proposed by the Multiband OFDM Alliance (MBOA). By showing that line spectra are still an issue for new modulation scheme (MB-OFDM), it proposes a mechanism of scrambling the data with an increased length linear feedback shift register (compared to the current proposal), a new set of seeds, and random phase reversion for the removal of line spectra. Following this, the thesis considers a technique for increasing the user capacity of the current MB-OFDM system to meet the needs of future wireless systems, through an adaptive multiuser synchronous coded transmission scheme. This involves real time iterative generation of user codes, which are generated over time and frequency leading to increased capacity. With the assumption of complete channel state information (CSI) at the receiver, an iterative MMSE algorithm is used which involves replacement of each users s signature with its normalized MMSE filter function allowing the overall Total Squared Correlation (TSC) of the system to decrease until the algorithm converges to a fixed set of signature vectors. This allows the system to be overloaded and user\u27s codes to be quasi-orthogonal. Simulation results show that for code of length nine (spread over three frequency bands and three time slots), ten users can be accommodated for a given QoS and with addition of single frequency sub-band which allows the code length to increase from nine to twelve (four frequency sub-bands and three time slots), fourteen users with nearly same QoS can be accommodated in the system. This communication is overlooked by a central controller with necessary functionalities to facilitate the process. The thesis essentially considers the uplink from transmitting devices to this central controller. Furthermore, analysis of this coded transmission in presence of interference is carried to display the robustness of this scheme through its adaptation by incorporating knowledge of existing Narrowband (NB) Interference for computing the codes. This allows operation of sub-band coexisting with NB interference without substantial degradation given reasonable interference energy (SIR=-l0dB and -5dB considered). Finally, the thesis looks at design implementation and convergence issues related to code vector generation whereby, use of Lanczos algorithm is considered for simpler design and faster convergence. The algorithm can be either used to simplify design implementation by providing simplified solution to Weiner Hopf equation (without requiring inverse of correlation matrix) over Krylov subspace or can be used to expedite convergence by updating the signature sequence with eigenvector corresponding to the least eigenvalue of the signature correlation matrix through reduced rank eigen subspace search
The performance of the vehicular communication-clustering process
For the new wireless systems and beyond, the intelligent transportation system is considered as one of the main features that could be covered in the new research topics. Furthermore, both high-speed data transmission and data processing play a crucial role for these generations. Our work covers two main propositions in order to attain an improvement in such intelligent systems performance. A clustering algorithm is proposed and presented for grouping mobile nodes based on their speeds with some modified head assignments processes. This will be combined with a parallel-processing technique that enhances the QoS. Mainly, this work concerns enhancing the V2V data transmission and the processing speed. Thus, a wavelet processing stage has been imposed to optimize the transmitted power phenomenon. In order to check the validity of such proposition, five main efficiency factors have been investigated; namely complementary cumulative distributions, bit rates, energy efficiency, the lifetime of cluster head and the ordinary nodes reattaching-head average times.
Multiband OFDM for Cognitive Radio – A Way for Cyclostationary Detection and Interference Cancellation
With the tremendous growth in wireless technology there has been a shortage in the spectrum utilized for certain applications while some spectrum remains idle. To overcome this problem and for the efficient utilization of the spectrum cognitive radio is the suitable solution.Multiband OFDM can be easily modeled as cognitive radio, a technology that is employed for utilizing the available spectrum in the most efficient way. Since sensing of the free spectrum for detecting the arrival of the primary users is the foremost job of cognitive, here cyclostationary based spectrum sensing is carried out. Its performance is investigated using universal software defined radio peripheral (USRP) kit which is the hardware test bed for the cognitive radio system. Results are shown using Labview software. Further to mitigate the interference between the primary and cognitive users a modified intrusion elimination (AIC) algorithm had been proposed which in turn ensures the coexistence of both the users in the same wireless environment
Study and miniaturisation of antennas for ultra wideband communication systems
PhDWireless communications have been growing with an astonishing rate over the past
few years and wireless terminals for future applications are required to provide
diverse services. This rising demand prompts the needs for antennas able to cover
multiple bandwidths or an ultrawide bandwidth for various systems.
Since the release by the Federal Communications Commission (FCC) of a bandwidth
of 7.5 GHz (from 3.1 GHz to 10.6 GHz) for ultra wideband (UWB) wireless
communications, UWB has been rapidly evolving as a potential wireless technology
and UWB antennas have consequently drawn more and more attention from both
academia and industries worldwide.
Unlike traditional narrow band antennas, design and analysis of UWB antennas are
facing more challenges and difficulties. A competent UWB antenna should be
capable of operating over an ultra wide bandwidth as assigned by the FCC. At the
same time, a small and compact antenna size is highly desired, due to the integration
requirement of entire UWB systems. Another key requirement of UWB antennas is
the good time domain behaviour, i.e. a good impulse response with minimal
distortion.
This thesis focuses on UWB antenna miniaturisation and analysis. Studies have been
undertaken to cover the aspects of UWB fundamentals and antenna theory. Extensive
investigations are also conducted on three different types of miniaturised UWB
antennas.
5
The first type of miniaturised UWB antenna studied in this thesis is the loaded
orthogonal half disc monopole antenna. An inductive load is introduced to broaden
the impedance bandwidth as well as the pattern bandwidth, in other words, an
equivalent size reduction is realised.
The second type of miniaturised UWB antenna is the printed half disc monopole
antenna. By simply halving the original antenna and tuning the width of the coplanar
ground plane, a significant more than 50% size reduction is achieved.
The third type of miniaturised UWB antenna is the printed quasi-self-complementary
antenna. By exploiting a quasi-self-complementary structure and a built-in matching
section, a small and compact antenna dimension is achieved.
The performances and characteristics of the three types of miniaturised UWB
antennas are studied both numerically and experimentally and the design parameters
for achieving optimal operation of the antennas are also analysed extensively in order
to understand the antenna operations.
Also, time domain performance of the Coplanar Waveguide (CPW)-fed disc
monopole antenna is examined in this thesis to demonstrate the importance of time
domain study on UWB antennas.
Over the past few years of my PhD study, I feel honoured and lucky to work with
some of the most prestigious researchers in the Department of Electronic
Engineering, Queen Mary, University of London. I would like to show my most
cordial gratitude to those who have been helping me during the past few years. There
would be no any progress without their generous and sincere support.
First of all, I would like to thank my supervisors Professor Clive Parini and Professor
Xiaodong Chen, for their kind supervision and encouragement. I am impressed by
their notable academic background and profound understanding of the subjects,
which have proved to be immense benefits to me. It has been my great pleasure and
honour to be under their supervision and work with them.
Second of all, I would like to thank Mr John Dupuy for his help in the fabrication
and measurement of antennas I have designed during my PhD study. Also, a special
acknowledgement goes to all of the staff for all the assistance throughout my
graduate program
Design and implementation of frequency synthesizers for 3-10 ghz mulitband ofdm uwb communication
The allocation of frequency spectrum by the FCC for Ultra Wideband (UWB)
communications in the 3.1-10.6 GHz has paved the path for very high data rate Gb/s
wireless communications. Frequency synthesis in these communication systems involves
great challenges such as high frequency and wideband operation in addition to stringent
requirements on frequency hopping time and coexistence with other wireless standards.
This research proposes frequency generation schemes for such radio systems and their
integrated implementations in silicon based technologies. Special emphasis is placed on
efficient frequency planning and other system level considerations for building compact
and practical systems for carrier frequency generation in an integrated UWB radio.
This work proposes a frequency band plan for multiband OFDM based UWB
radios in the 3.1-10.6 GHz range. Based on this frequency plan, two 11-band frequency
synthesizers are designed, implemented and tested making them one of the first
frequency synthesizers for UWB covering 78% of the licensed spectrum. The circuits are
implemented in 0.25µm SiGe BiCMOS and the architectures are based on a single VCO at a fixed frequency followed by an array of dividers, multiplexers and single sideband
(SSB) mixers to generate the 11 required bands in quadrature with fast hopping in much
less than 9.5 ns. One of the synthesizers is integrated and tested as part of a 3-10 GHz
packaged receiver. It draws 80 mA current from a 2.5 V supply and occupies an area of
2.25 mm2.
Finally, an architecture for a UWB synthesizer is proposed that is based on a
single multiband quadrature VCO, a programmable integer divider with 50% duty cycle
and a single sideband mixer. A frequency band plan is proposed that greatly relaxes the
tuning range requirement of the multiband VCO and leads to a very digitally intensive
architecture for wideband frequency synthesis suitable for implementation in deep
submicron CMOS processes. A design in 130nm CMOS occupies less than 1 mm2 while
consuming 90 mW. This architecture provides an efficient solution in terms of area and
power consumption with very low complexity
Radio channel characterisation and system-level modelling for ultra wideband body-centric wireless communications
PhDThe next generation of wireless communication is evolving towards user-centric networks,
where constant and reliable connectivity and services are essential. Bodycentric
wireless network (BCWN) is the most exciting and emerging 4G technology
for short (1-5 m) and very short (below 1 m) range communication systems. It has
got numerous applications including healthcare, entertainment, surveillance, emergency,
sports and military. The major difference between the BCWN and conventional
wireless systems is the radio channel over which the communication takes place. The
human body is a hostile medium from the radio propagation perspective and it is
therefore important to understand and characterise the effect of the human body on
the antenna elements, the radio propagation channel parameters and hence the system
performance. In addition, fading is another concern that affects the reliability and
quality of the wireless link, which needs to be taken into account for a low cost and
reliable wireless communication system for body-centric networks.
The complex nature of the BCWN requires operating wireless devices to provide
low power requirements, less complexity, low cost and compactness in size. Apart
from these characteristics, scalable data rates and robust performance in most fading
conditions and jamming environment, even at low signal to noise ratio (SNR) is
needed. Ultra-wideband (UWB) technology is one of the most promising candidate for
BCWN as it tends to fulfill most of these requirements. The thesis focuses on the characterisation
of ultra wideband body-centric radio propagation channel using single
and multiple antenna techniques. Apart from channel characterisation, system level
modelling of potential UWB radio transceivers for body-centric wireless network is
also proposed. Channel models with respect to large scale and delay analysis are derived
from measured parameters. Results and analyses highlight the consequences
of static and dynamic environments in addition to the antenna positions on the performance
of body-centric wireless communication channels. Extensive measurement
i
campaigns are performed to analyse the significance of antenna diversity to combat
the channel fading in body-centric wireless networks. Various diversity combining
techniques are considered in this process. Measurement data are also used to predict
the performance of potential UWB systems in the body-centric wireless networks.
The study supports the significance of single and multiple antenna channel characterisation
and modelling in producing suitable wireless systems for ultra low power
body-centric wireless networks.University of Engineering and Technology Lahore Pakista
Cross-Layer Design for Multi-Antenna Ultra-Wideband Systems
Ultra-wideband (UWB) is an emerging technology that offers great promises to satisfy the growing demand for low cost and high-speed digital wireless home networks. The enormous bandwidth available, the potential for high data rates, as well as the potential for small size and low processing power long with low implementation cost, all present a unique opportunity for UWB to become a widely adopted radio solution for future wireless home-networking technology. Nevertheless, in order for UWB devices to coexist with other existing wireless technology, the transmitted power level of UWB is strictly limited by the FCC spectral mask. Such limitation poses significant design challenges to any UWB system.
This thesis introduces various means to cope with these design challenges. Advanced technologies including multiple-input multiple-output (MIMO) coding, cooperative communications, and
cross-layer design are employed to enhance the performance and coverage range of UWB systems. First a MIMO-coding framework for multi-antenna UWB communication systems is developed. By a technique of band hopping in combination with jointly coding across spatial, temporal, and frequency domains, the proposed scheme is able to
exploit all the available spatial and frequency diversity, richly inherent in UWB channels. Then, the UWB performance in realistic UWB channel environments is characterized. The proposed performance analysis successfully captures the unique multipath-rich property and random-clustering phenomenon of UWB channels. Next, a
cross-layer channel allocation scheme for UWB multiband OFDM systems is proposed. The proposed scheme optimally allocates subbands, transmitted power, and data rates among users by taking into consideration the performance requirement, the power limitation, as well as the band hopping for users with different data rates. Also, an employment of cooperative communications in UWB systems is proposed to enhance the UWB performance and coverage by exploiting the broadcasting nature of wireless channels and the cooperation among UWB devices. Furthermore, an OFDM cooperative protocol is developed and then applied to enhance the performance of UWB systems. The proposed cooperative protocol not only achieves full diversity but also efficiently utilizes the available bandwidth
- …