VMQ: an algorithm for measuring the Video Motion Quality

This paper proposes a new full-reference algorithm, called Video Motion Quality (VMQ) that evaluates the relative motion quality of the distorted video generated from the reference video based on all the frames from both videos. VMQ uses any frame-based metric to compare frames from the original and distorted videos. It uses the time stamp for each frame to measure the intersection values. VMQ combines the comparison values with the intersection values in an aggregation function to produce the final result. To explore the efficiency of the VMQ, we used a set of raw, uncompressed videos to generate a new set of encoded videos. These encoded videos are then used to generate a new set of distorted videos which have the same video bit rate and frame size but with reduced frame rate. To evaluate the VMQ, we applied the VMQ by comparing the encoded videos with the distorted videos and recorded the results. The initial evaluation results showed compatible trends with most of subjective evaluation results

Toward a General Parametric Model for Assessing the Impact of Video Transcoding on Objective Video Quality

Video transcoding can cause degradation to an original video. Currently, there is no general model that assesses the impact of video transcoding on video quality. Such a model could play a critical role in evaluating the quality of the transcoded video, and thereby optimizing delivery of video to end-users while meeting their expectations. The main contribution of this research is the development and substantiation of a general parametric model, called the Video Transcoding Objective-quality Model (VTOM), that provides an extensible video transcoding service selection mechanism, which takes into account both the format and characteristics of the original video and the desired output, i.e., viewing format with preferred quality of service. VTOM represents a mathematical function that uses a set of media-related parameters for the original video and desired output, including codec, bit rate, frame rate, and frame size to predict the quality of the transcoded video generated from a specific transcoding. VTOM includes four quality sub-models, each describing the impact of each of these parameters on objective video quality, as well as a weighted-product aggregation function that combines these quality sub-models with four additional error sub-models in a single function for assessing the overall video quality. I compared the predicted quality results generated from the VTOM with quality values generated from an existing objective-quality metric. These comparisons yielded results that showed good correlations, with low error values. VTOM helps the researchers and developers of video delivery systems and applications to calculate the degradation that video transcoding can cause on the fly, rather than evaluate it statistically using statistical methods that only consider the desired output. Because VTOM takes into account the quality of the input video, i.e., video format and characteristics, and the desired quality of the output video, it can be used for dynamic video transcoding service selection and composition. A number of quality metrics were examined and used in development of VTOM and its assessment. However, this research discovered that, to date, there are no suitable metrics in the literature for comparing two videos with different frame rates. Therefore, this dissertation defines a new metric, called Frame Rate Metric (FRM) as part of its contributions. FRM can use any frame-based quality metric for comparing frames from both videos. Finally, this research presents and adapts four Quality of Service (QoS)-aware video transcoding service selection algorithms. The experimental results showed that these four algorithms achieved good results in terms of time complexity, success ratio, and user satisfaction rate

3D multiple description coding for error resilience over wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile communications has gained a growing interest from both customers and service providers alike in the last 1-2 decades. Visual information is used in many application domains such as remote health care, video –on demand, broadcasting, video surveillance etc. In order to enhance the visual effects of digital video content, the depth perception needs to be provided with the actual visual content. 3D video has earned a significant interest from the research community in recent years, due to the tremendous impact it leaves on viewers and its enhancement of the user’s quality of experience (QoE). In the near future, 3D video is likely to be used in most video applications, as it offers a greater sense of immersion and perceptual experience. When 3D video is compressed and transmitted over error prone channels, the associated packet loss leads to visual quality degradation. When a picture is lost or corrupted so severely that the concealment result is not acceptable, the receiver typically pauses video playback and waits for the next INTRA picture to resume decoding. Error propagation caused by employing predictive coding may degrade the video quality severely. There are several ways used to mitigate the effects of such transmission errors. One widely used technique in International Video Coding Standards is error resilience. The motivation behind this research work is that, existing schemes for 2D colour video compression such as MPEG, JPEG and H.263 cannot be applied to 3D video content. 3D video signals contain depth as well as colour information and are bandwidth demanding, as they require the transmission of multiple high-bandwidth 3D video streams. On the other hand, the capacity of wireless channels is limited and wireless links are prone to various types of errors caused by noise, interference, fading, handoff, error burst and network congestion. Given the maximum bit rate budget to represent the 3D scene, optimal bit-rate allocation between texture and depth information rendering distortion/losses should be minimised. To mitigate the effect of these errors on the perceptual 3D video quality, error resilience video coding needs to be investigated further to offer better quality of experience (QoE) to end users. This research work aims at enhancing the error resilience capability of compressed 3D video, when transmitted over mobile channels, using Multiple Description Coding (MDC) in order to improve better user’s quality of experience (QoE). Furthermore, this thesis examines the sensitivity of the human visual system (HVS) when employed to view 3D video scenes. The approach used in this study is to use subjective testing in order to rate people’s perception of 3D video under error free and error prone conditions through the use of a carefully designed bespoke questionnaire.Petroleum Technology Development Fund (PTDF

SSIM-Inspired Quality Assessment, Compression, and Processing for Visual Communications

Objective Image and Video Quality Assessment (I/VQA) measures predict image/video quality as perceived by human beings - the ultimate consumers of visual data. Existing research in the area is mainly limited to benchmarking and monitoring of visual data. The use of I/VQA measures in the design and optimization of image/video processing algorithms and systems is more desirable, challenging and fruitful but has not been well explored. Among the recently proposed objective I/VQA approaches, the structural similarity (SSIM) index and its variants have emerged as promising measures that show superior performance as compared to the widely used mean squared error (MSE) and are computationally simple compared with other state-of-the-art perceptual quality measures. In addition, SSIM has a number of desirable mathematical properties for optimization tasks. The goal of this research is to break the tradition of using MSE as the optimization criterion for image and video processing algorithms. We tackle several important problems in visual communication applications by exploiting SSIM-inspired design and optimization to achieve significantly better performance. Firstly, the original SSIM is a Full-Reference IQA (FR-IQA) measure that requires access to the original reference image, making it impractical in many visual communication applications. We propose a general purpose Reduced-Reference IQA (RR-IQA) method that can estimate SSIM with high accuracy with the help of a small number of RR features extracted from the original image. Furthermore, we introduce and demonstrate the novel idea of partially repairing an image using RR features. Secondly, image processing algorithms such as image de-noising and image super-resolution are required at various stages of visual communication systems, starting from image acquisition to image display at the receiver. We incorporate SSIM into the framework of sparse signal representation and non-local means methods and demonstrate improved performance in image de-noising and super-resolution. Thirdly, we incorporate SSIM into the framework of perceptual video compression. We propose an SSIM-based rate-distortion optimization scheme and an SSIM-inspired divisive optimization method that transforms the DCT domain frame residuals to a perceptually uniform space. Both approaches demonstrate the potential to largely improve the rate-distortion performance of state-of-the-art video codecs. Finally, in real-world visual communications, it is a common experience that end-users receive video with significantly time-varying quality due to the variations in video content/complexity, codec configuration, and network conditions. How human visual quality of experience (QoE) changes with such time-varying video quality is not yet well-understood. We propose a quality adaptation model that is asymmetrically tuned to increasing and decreasing quality. The model improves upon the direct SSIM approach in predicting subjective perceptual experience of time-varying video quality

A Parametric Sound Object Model for Sound Texture Synthesis

This thesis deals with the analysis and synthesis of sound textures based on parametric sound objects. An overview is provided about the acoustic and perceptual principles of textural acoustic scenes, and technical challenges for analysis and synthesis are considered. Four essential processing steps for sound texture analysis are identifi ed, and existing sound texture systems are reviewed, using the four-step model as a guideline. A theoretical framework for analysis and synthesis is proposed. A parametric sound object synthesis (PSOS) model is introduced, which is able to describe individual recorded sounds through a fi xed set of parameters. The model, which applies to harmonic and noisy sounds, is an extension of spectral modeling and uses spline curves to approximate spectral envelopes, as well as the evolution of parameters over time. In contrast to standard spectral modeling techniques, this representation uses the concept of objects instead of concatenated frames, and it provides a direct mapping between sounds of diff erent length. Methods for automatic and manual conversion are shown. An evaluation is presented in which the ability of the model to encode a wide range of di fferent sounds has been examined. Although there are aspects of sounds that the model cannot accurately capture, such as polyphony and certain types of fast modulation, the results indicate that high quality synthesis can be achieved for many different acoustic phenomena, including instruments and animal vocalizations. In contrast to many other forms of sound encoding, the parametric model facilitates various techniques of machine learning and intelligent processing, including sound clustering and principal component analysis. Strengths and weaknesses of the proposed method are reviewed, and possibilities for future development are discussed

Quality of experience and access network traffic management of HTTP adaptive video streaming

The thesis focuses on Quality of Experience (QoE) of HTTP adaptive video streaming (HAS) and traffic management in access networks to improve the QoE of HAS. First, the QoE impact of adaptation parameters and time on layer was investigated with subjective crowdsourcing studies. The results were used to compute a QoE-optimal adaptation strategy for given video and network conditions. This allows video service providers to develop and benchmark improved adaptation logics for HAS. Furthermore, the thesis investigated concepts to monitor video QoE on application and network layer, which can be used by network providers in the QoE-aware traffic management cycle. Moreover, an analytic and simulative performance evaluation of QoE-aware traffic management on a bottleneck link was conducted. Finally, the thesis investigated socially-aware traffic management for HAS via Wi-Fi offloading of mobile HAS flows. A model for the distribution of public Wi-Fi hotspots and a platform for socially-aware traffic management on private home routers was presented. A simulative performance evaluation investigated the impact of Wi-Fi offloading on the QoE and energy consumption of mobile HAS.Die Doktorarbeit beschäftigt sich mit Quality of Experience (QoE) – der subjektiv empfundenen Dienstgüte – von adaptivem HTTP Videostreaming (HAS) und mit Verkehrsmanagement, das in Zugangsnetzwerken eingesetzt werden kann, um die QoE des adaptiven Videostreamings zu verbessern. Zuerst wurde der Einfluss von Adaptionsparameters und der Zeit pro Qualitätsstufe auf die QoE von adaptivem Videostreaming mittels subjektiver Crowdsourcingstudien untersucht. Die Ergebnisse wurden benutzt, um die QoE-optimale Adaptionsstrategie für gegebene Videos und Netzwerkbedingungen zu berechnen. Dies ermöglicht Dienstanbietern von Videostreaming verbesserte Adaptionsstrategien für adaptives Videostreaming zu entwerfen und zu benchmarken. Weiterhin untersuchte die Arbeit Konzepte zum Überwachen von QoE von Videostreaming in der Applikation und im Netzwerk, die von Netzwerkbetreibern im Kreislauf des QoE-bewussten Verkehrsmanagements eingesetzt werden können. Außerdem wurde eine analytische und simulative Leistungsbewertung von QoE-bewusstem Verkehrsmanagement auf einer Engpassverbindung durchgeführt. Schließlich untersuchte diese Arbeit sozialbewusstes Verkehrsmanagement für adaptives Videostreaming mittels WLAN Offloading, also dem Auslagern von mobilen Videoflüssen über WLAN Netzwerke. Es wurde ein Modell für die Verteilung von öffentlichen WLAN Zugangspunkte und eine Plattform für sozialbewusstes Verkehrsmanagement auf privaten, häuslichen WLAN Routern vorgestellt. Abschließend untersuchte eine simulative Leistungsbewertung den Einfluss von WLAN Offloading auf die QoE und den Energieverbrauch von mobilem adaptivem Videostreaming

Video modeling via implicit motion representations

Video modeling refers to the development of analytical representations for explaining the intensity distribution in video signals. Based on the analytical representation, we can develop algorithms for accomplishing particular video-related tasks. Therefore video modeling provides us a foundation to bridge video data and related-tasks. Although there are many video models proposed in the past decades, the rise of new applications calls for more efficient and accurate video modeling approaches.;Most existing video modeling approaches are based on explicit motion representations, where motion information is explicitly expressed by correspondence-based representations (i.e., motion velocity or displacement). Although it is conceptually simple, the limitations of those representations and the suboptimum of motion estimation techniques can degrade such video modeling approaches, especially for handling complex motion or non-ideal observation video data. In this thesis, we propose to investigate video modeling without explicit motion representation. Motion information is implicitly embedded into the spatio-temporal dependency among pixels or patches instead of being explicitly described by motion vectors.;Firstly, we propose a parametric model based on a spatio-temporal adaptive localized learning (STALL). We formulate video modeling as a linear regression problem, in which motion information is embedded within the regression coefficients. The coefficients are adaptively learned within a local space-time window based on LMMSE criterion. Incorporating a spatio-temporal resampling and a Bayesian fusion scheme, we can enhance the modeling capability of STALL on more general videos. Under the framework of STALL, we can develop video processing algorithms for a variety of applications by adjusting model parameters (i.e., the size and topology of model support and training window). We apply STALL on three video processing problems. The simulation results show that motion information can be efficiently exploited by our implicit motion representation and the resampling and fusion do help to enhance the modeling capability of STALL.;Secondly, we propose a nonparametric video modeling approach, which is not dependent on explicit motion estimation. Assuming the video sequence is composed of many overlapping space-time patches, we propose to embed motion-related information into the relationships among video patches and develop a generic sparsity-based prior for typical video sequences. First, we extend block matching to more general kNN-based patch clustering, which provides an implicit and distributed representation for motion information. We propose to enforce the sparsity constraint on a higher-dimensional data array signal, which is generated by packing the patches in the similar patch set. Then we solve the inference problem by updating the kNN array and the wanted signal iteratively. Finally, we present a Bayesian fusion approach to fuse multiple-hypothesis inferences. Simulation results in video error concealment, denoising, and deartifacting are reported to demonstrate its modeling capability.;Finally, we summarize the proposed two video modeling approaches. We also point out the perspectives of implicit motion representations in applications ranging from low to high level problems

A MODEL FOR PREDICTING THE PERFORMANCE OF IP VIDEOCONFERENCING

With the incorporation of free desktop videoconferencing (DVC) software on the majority of the world's PCs, over the recent years, there has, inevitably, been considerable interest in using DVC over the Internet. The growing popularity of DVC increases the need for multimedia quality assessment. However, the task of predicting the perceived multimedia quality over the Internet Protocol (IP) networks is complicated by the fact that the audio and video streams are susceptible to unique impairments due to the unpredictable nature of IP networks, different types of task scenarios, different levels of complexity, and other related factors. To date, a standard consensus to define the IP media Quality of Service (QoS) has yet to be implemented. The thesis addresses this problem by investigating a new approach to assess the quality of audio, video, and audiovisual overall as perceived in low cost DVC systems. The main aim of the thesis is to investigate current methods used to assess the perceived IP media quality, and then propose a model which will predict the quality of audiovisual experience from prevailing network parameters. This thesis investigates the effects of various traffic conditions, such as, packet loss, jitter, and delay and other factors that may influence end user acceptance, when low cost DVC is used over the Internet. It also investigates the interaction effects between the audio and video media, and the issues involving the lip sychronisation error. The thesis provides the empirical evidence that the subjective mean opinion score (MOS) of the perceived multimedia quality is unaffected by lip synchronisation error in low cost DVC systems. The data-gathering approach that is advocated in this thesis involves both field and laboratory trials to enable the comparisons of results between classroom-based experiments and real-world environments to be made, and to provide actual real-world confirmation of the bench tests. The subjective test method was employed since it has been proven to be more robust and suitable for the research studies, as compared to objective testing techniques. The MOS results, and the number of observations obtained, have enabled a set of criteria to be established that can be used to determine the acceptable QoS for given network conditions and task scenarios. Based upon these comprehensive findings, the final contribution of the thesis is the proposal of a new adaptive architecture method that is intended to enable the performance of IP based DVC of a particular session to be predicted for a given network condition