Map matching by using inertial sensors: literature review

This literature review aims to clarify what is known about map matching by using inertial sensors and what are the requirements for map matching, inertial sensors, placement and possible complementary position technology. The target is to develop a wearable location system that can position itself within a complex construction environment automatically with the aid of an accurate building model. The wearable location system should work on a tablet computer which is running an augmented reality (AR) solution and is capable of track and visualize 3D-CAD models in real environment. The wearable location system is needed to support the system in initialization of the accurate camera pose calculation and automatically finding the right location in the 3D-CAD model. One type of sensor which does seem applicable to people tracking is inertial measurement unit (IMU). The IMU sensors in aerospace applications, based on laser based gyroscopes, are big but provide a very accurate position estimation with a limited drift. Small and light units such as those based on Micro-Electro-Mechanical (MEMS) sensors are becoming very popular, but they have a significant bias and therefore suffer from large drifts and require method for calibration like map matching. The system requires very little fixed infrastructure, the monetary cost is proportional to the number of users, rather than to the coverage area as is the case for traditional absolute indoor location systems.Siirretty Doriast

Indoor Inertial Waypoint Navigation for the Blind

Indoor navigation technology is needed to support seamless mobility for the visually impaired. This paper describes the construction and evaluation of an inertial dead reckoning navigation system that provides real-time auditory guidance along mapped routes. Inertial dead reckoning is a navigation technique coupling step counting together with heading estimation to compute changes in position at each step. The research described here outlines the development and evaluation of a novel navigation system that utilizes information from the mapped route to limit the problematic error accumulation inherent in traditional dead reckoning approaches. The prototype system consists of a wireless inertial sensor unit, placed at the users’ hip, which streams readings to a smartphone processing a navigation algorithm. Pilot human trials were conducted assessing system efficacy by studying route-following performance with blind and sighted subjects using the navigation system with real-time guidance, versus offline verbal directions

An Adaptive Human Activity-Aided Hand-Held Smartphone-Based Pedestrian Dead Reckoning Positioning System

Pedestrian dead reckoning (PDR), enabled by smartphones’ embedded inertial sensors, is widely applied as a type of indoor positioning system (IPS). However, traditional PDR faces two challenges to improve its accuracy: lack of robustness for different PDR-related human activities and positioning error accumulation over elapsed time. To cope with these issues, we propose a novel adaptive human activity-aided PDR (HAA-PDR) IPS that consists of two main parts, human activity recognition (HAR) and PDR optimization. (1) For HAR, eight different locomotion-related activities are divided into two classes: steady-heading activities (ascending/descending stairs, stationary, normal walking, stationary stepping, and lateral walking) and non-steady-heading activities (door opening and turning). A hierarchical combination of a support vector machine (SVM) and decision tree (DT) is used to recognize steady-heading activities. An autoencoder-based deep neural network (DNN) and a heading range-based method to recognize door opening and turning, respectively. The overall HAR accuracy is over 98.44%. (2) For optimization methods, a process automatically sets the parameters of the PDR differently for different activities to enhance step counting and step length estimation. Furthermore, a method of trajectory optimization mitigates PDR error accumulation utilizing the non-steady-heading activities. We divided the trajectory into small segments and reconstructed it after targeted optimization of each segment. Our method does not use any a priori knowledge of the building layout, plan, or map. Finally, the mean positioning error of our HAA-PDR in a multilevel building is 1.79 m, which is a significant improvement in accuracy compared with a baseline state-of-the-art PDR system

Pozicioniranje i praćenje pješaka u zatvorenom prostoru koristeći senzore pametnih telefona, otkrivanje koraka i algoritam za geokodiranje

The paper deals with indoor navigation using inertial sensors (accelerometers, gyroscopes, etc.) built in a smartphone. The main disadvantage of the use of inertial sensors is the accuracy, which rapidly decreases with the increasing time of the measurement. The reason of the deteriorating accuracy is the presence of errors in inertial measurements, which are accumulated in the integration process. The paper describes the determination of a pedestrian trajectory using step detection method, which is improved with utilization of the adaptive step length estimation algorithm. This algorithm reflects the change of the step length with different types of movement. The proposal of the data processing uses information from floormap, what allows the verification of the pedestrian position and detects the collision of the trajectory with the floormap. The proposed algorithm significantly increases the accuracy of the resulting trajectory. Another extension of the proposed algorithm is the implementation of the barometer measurements for determination of the height differences. This fact allows change the floor in a multi-storey buildings. The experimental measurement was realized with a smartphone Samsung Galaxy S4.Rad se bavi navigacijom u zatvorenom prostoru koristeći inercijalne senzore (akcelerometre, žiroskope, itd.) ugrađene u pametne telefone. Najveći nedostatak korištenja inercijalnih senzora je netočnost koja se ubrzano povećava produljenjem vremena mjerenja. Razlog smanjenja točnosti je prisutnost pogrešaka inercijalnih mjerenja koje se akumuliraju kroz proces integracije. Rad opisuje određivanje putanje pješaka koristeći metodu praćenja koraka koja je poboljšana korištenjem algoritma za procjenu prilagodljive duljine koraka. Ovaj algoritam odražava promjene u duljini koraka s različitim vrstama kretanja. Prijedlog obrade podataka koristi informacije iz tlocrta katova što omogućava potvrdu položaja pješaka i otkriva koliziju putanje s tlocrtom. Predloženi algoritam znatno povećava točnost dobivene putanje. Drugi dodatak predloženog algoritma se odnosi na upotrebu barometarskih mjerenja pri određivanju visinskih razlika. Ova činjenica omogućava promjenu kata u višekatnoj zgradi. Eksperimentalno mjerenje je izvršeno uz pomoć pametnog telefona Samsung Galaxy S4

Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition

The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future

Map Matching by Using Inertial Sensors – Literature Review

This literature review aims to clarify what is known about map matching by using inertial sensors and what are the requirements for map matching, inertial sensors, placement and possible complementary position technology. The target is to develop a wearable location system that can position itself within a complex construction environment automatically with the aid of an accurate building model. The wearable location system should work on a tablet computer which is running an augmented reality (AR) solution and is capable of track and visualize 3D-CAD models in real environment. The wearable location system is needed to support the system in initialization of the accurate camera pose calculation and automatically finding the right location in the 3D-CAD model. One type of sensor which does seem applicable to people tracking is inertial measurement unit (IMU). The IMU sensors in aerospace applications, based on laser based gyroscopes, are big but provide a very accurate position estimation with a limited drift. Small and light units such as those based on Micro-Electro-Mechanical (MEMS) sensors are becoming very popular, but they have a signicant bias and therefore suffer from large drifts and require method for calibration like map matching. The system requires very little fixed infrastructure, the monetary cost is proportional to the number of users, rather than to the coverage area as is the case for traditional absolute indoor location systems.</p

Robust localization with wearable sensors

Measuring physical movements of humans and understanding human behaviour is useful in a variety of areas and disciplines. Human inertial tracking is a method that can be leveraged for monitoring complex actions that emerge from interactions between human actors and their environment. An accurate estimation of motion trajectories can support new approaches to pedestrian navigation, emergency rescue, athlete management, and medicine. However, tracking with wearable inertial sensors has several problems that need to be overcome, such as the low accuracy of consumer-grade inertial measurement units (IMUs), the error accumulation problem in long-term tracking, and the artefacts generated by movements that are less common. This thesis focusses on measuring human movements with wearable head-mounted sensors to accurately estimate the physical location of a person over time. The research consisted of (i) providing an overview of the current state of research for inertial tracking with wearable sensors, (ii) investigating the performance of new tracking algorithms that combine sensor fusion and data-driven machine learning, (iii) eliminating the effect of random head motion during tracking, (iv) creating robust long-term tracking systems with a Bayesian neural network and sequential Monte Carlo method, and (v) verifying that the system can be applied with changing modes of behaviour, defined as natural transitions from walking to running and vice versa. This research introduces a new system for inertial tracking with head-mounted sensors (which can be placed in, e.g. helmets, caps, or glasses). This technology can be used for long-term positional tracking to explore complex behaviours

Fusion of non-visual and visual sensors for human tracking

Human tracking is an extensively researched yet still challenging area in the Computer Vision field, with a wide range of applications such as surveillance and healthcare. People may not be successfully tracked with merely the visual information in challenging cases such as long-term occlusion. Thus, we propose to combine information from other sensors with the surveillance cameras to persistently localize and track humans, which is becoming more promising with the pervasiveness of mobile devices such as cellphones, smart watches and smart glasses embedded with all kinds of sensors including accelerometers, gyroscopes, magnetometers, GPS, WiFi modules and so on. In this thesis, we firstly investigate the application of Inertial Measurement Unit (IMU) from mobile devices to human activity recognition and human tracking, we then develop novel persistent human tracking and indoor localization algorithms by the fusion of non-visual sensors and visual sensors, which not only overcomes the occlusion challenge in visual tracking, but also alleviates the calibration and drift problems in IMU tracking --Abstract, page iii