Device Free Localisation Techniques in Indoor Environments

The location estimation of a target for a long period was performed only by device based localisation technique which is difficult in applications where target especially human is non-cooperative. A target was detected by equipping a device using global positioning systems, radio frequency systems, ultrasonic frequency systems, etc. Device free localisation (DFL) is an upcoming technology in automated localisation in which target need not equip any device for identifying its position by the user. For achieving this objective, the wireless sensor network is a better choice due to its growing popularity. This paper describes the possible categorisation of recently developed DFL techniques using wireless sensor network. The scope of each category of techniques is analysed by comparing their potential benefits and drawbacks. Finally, future scope and research directions in this field are also summarised

Sensor Management for Tracking in Sensor Networks

We study the problem of tracking an object moving through a network of wireless sensors. In order to conserve energy, the sensors may be put into a sleep mode with a timer that determines their sleep duration. It is assumed that an asleep sensor cannot be communicated with or woken up, and hence the sleep duration needs to be determined at the time the sensor goes to sleep based on all the information available to the sensor. Having sleeping sensors in the network could result in degraded tracking performance, therefore, there is a tradeoff between energy usage and tracking performance. We design sleeping policies that attempt to optimize this tradeoff and characterize their performance. As an extension to our previous work in this area [1], we consider generalized models for object movement, object sensing, and tracking cost. For discrete state spaces and continuous Gaussian observations, we derive a lower bound on the optimal energy-tracking tradeoff. It is shown that in the low tracking error regime, the generated policies approach the derived lower bound

Conditional Posterior Cramer-Rao Lower Bound and Distributed Target Tracking in Sensor Networks

Sequential Bayesian estimation is the process of recursively estimating the state of a dynamical system observed in the presence of noise. Posterior Cramer-Rao lower bound (PCRLB) sets a performance limit onany Bayesian estimator for the given dynamical system. The PCRLBdoes not fully utilize the existing measurement information to give anindication of the mean squared error (MSE) of the estimator in the future. In many practical applications, we are more concerned with the value of the bound in the future than in the past. PCRLB is an offline bound, because it averages out the very useful measurement information, which makes it an off-line bound determined only by the system dynamical model, system measurement model and the prior knowledge of the system state at the initial time. This dissertation studies the sequential Bayesian estimation problem and then introduces the notation of conditional PCRLB, which utilizes the existing measurement information up to the current time, and sets the limit on the MSE of any Bayesian estimators at the next time step. This work has two emphases: firstly, we give the mathematically rigorous formulation of the conditional PCRLB as well as the approximate recursive version of conditional PCRLB for nonlinear, possibly non-Gaussian dynamical systems. Secondly, we apply particle filter techniques to compute the numerical values of the conditional PCRLB approximately, which overcomes the integration problems introduced by nonlinear/non-Gaussian systems. Further, we explore several possible applications of the proposed bound to find algorithms that provide improved performance. The primary problem of interest is the sensor selection problem for target tracking in sensor networks. Comparisons are also made between the performance of sensor selection algorithm based on the proposed bound and the existing approaches, such as information driven, nearest neighbor, and PCRLB with renewal strategy, to demonstrate the superior performances of the proposed approach. This dissertation also presents a bandwidth-efficient algorithm for tracking a target in sensor networks using distributed particle filters. This algorithm distributes the computation burden for target tracking over the sensor nodes. Each sensor node transmits a compressed local tracking result to the fusion center by a modified expectationmaximization (EM) algorithm to save the communication bandwidth. The fusion center incorporates the compressed tracking results to give the estimate of the target state. Finally, the target tracking problem in heterogeneous sensor networks is investigated extensively. Extended Kalman Filter and particle filter techniques are implemented and compared for tracking a maneuvering

Multiple-Target Tracking in Complex Scenarios

In this dissertation, we develop computationally efficient algorithms for multiple-target tracking: MTT) in complex scenarios. For each of these scenarios, we develop measurement and state-space models, and then exploit the structure in these models to propose efficient tracking algorithms. In addition, we address design issues such as sensor selection and resource allocation. First, we consider MTT when the targets themselves are moving in a time-varying multipath environment. We develop a sparse-measurement model that allows us to exploit the inherent joint delay-Doppler diversity offered by the environment. We then reformulate the problem of MTT as a block-support recovery problem using the sparse measurement model. We exploit the structure of the dictionary matrix to develop a computationally efficient block support recovery algorithm: and thereby a multiple-target tracking algorithm) under the assumption that the channel state describing the time-varying multipath environment is known. Further, we also derive an upper bound on the overall error probability of wrongly identifying the support of the sparse signal. We then relax the assumption that the channel state is known. We develop a new particle filter called the Multiple Rao-Blackwellized Particle Filter: MRBPF) to jointly estimate both the target and the channel states. We also compute the posterior Cramér-Rao bound: PCRB) on the estimates of the target and the channel states and use the PCRB to find a suitable subset of antennas to be used for transmission in each tracking interval, as well as the power transmitted by these antennas. Second, we consider the problem of tracking an unknown number and types of targets using a multi-modal sensor network. In a multi-modal sensor network, different quantities associated with the same state are measured using sensors of different kinds. Hence, an efficient method that can suitably combine the diverse information measured by each sensor is required. We first develop a Hierarchical Particle Filter: HPF) to estimate the unknown state from the multi-modal measurements for a special class of problems which can be modeled hierarchically. We then model our problem of tracking using a hierarchical model and then use the proposed HPF for joint initiation, termination and tracking of multiple targets. The multi-modal data consists of the measurements collected from a radar, an infrared camera and a human scout. We also propose a unified framework for multi-modal sensor management that comprises sensor selection: SS), resource allocation: RA) and data fusion: DF). Our approach is inspired by the trading behavior of economic agents in commercial markets. We model the sensors and the sensor manager as economic agents, and the interaction among them as a double sided market with both consumers and producers. We propose an iterative double auction mechanism for computing the equilibrium of such a market. We relate the equilibrium point to the solutions of SS, RA and DF. Third, we address MTT problem in the presence of data association ambiguity that arises due to clutter. Data association corresponds to the problem of assigning a measurement to each target. We treat the data association and state estimation as separate subproblems. We develop a game-theoretic framework to solve the data association, in which we model each tracker as a player and the set of measurements as strategies. We develop utility functions for each player, and then use a regret-based learning algorithm to find the correlated equilibrium of this game. The game-theoretic approach allows us to associate measurements to all the targets simultaneously. We then use particle filtering on the reduced dimensional state of each target, independently

A survey on wireless indoor localization from the device perspective

With the marvelous development of wireless techniques and ubiquitous deployment of wireless systems indoors, myriad indoor location-based services (ILBSs) have permeated into numerous aspects of modern life. The most fundamental functionality is to pinpoint the location of the target via wireless devices. According to how wireless devices interact with the target, wireless indoor localization schemes roughly fall into two categories: device based and device free. In device-based localization, a wireless device (e.g., a smartphone) is attached to the target and computes its location through cooperation with other deployed wireless devices. In device-free localization, the target carries no wireless devices, while the wireless infrastructure deployed in the environment determines the target’s location by analyzing its impact on wireless signals. This article is intended to offer a comprehensive state-of-the-art survey on wireless indoor localization from the device perspective. In this survey, we review the recent advances in both modes by elaborating on the underlying wireless modalities, basic localization principles, and data fusion techniques, with special emphasis on emerging trends in (1) leveraging smartphones to integrate wireless and sensor capabilities and extend to the social context for device-based localization, and (2) extracting specific wireless features to trigger novel human-centric device-free localization. We comprehensively compare each scheme in terms of accuracy, cost, scalability, and energy efficiency. Furthermore, we take a first look at intrinsic technical challenges in both categories and identify several open research issues associated with these new challenges.</jats:p