10281 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 11.07.10 to 16.07.10, Dagstuhl Seminar 10281 ``Dynamically Reconfigurable Architectures \u27\u27 was held in Schloss Dagstuhl~--~Leibniz Center for Informatics. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

FPGA based remote code integrity verification of programs in distributed embedded systems

The explosive growth of networked embedded systems has made ubiquitous and pervasive computing a reality. However, there are still a number of new challenges to its widespread adoption that include scalability, availability, and, especially, security of software. Among the different challenges in software security, the problem of remote-code integrity verification is still waiting for efficient solutions. This paper proposes the use of reconfigurable computing to build a consistent architecture for generation of attestations (proofs) of code integrity for an executing program as well as to deliver them to the designated verification entity. Remote dynamic update of reconfigurable devices is also exploited to increase the complexity of mounting attacks in a real-word environment. The proposed solution perfectly fits embedded devices that are nowadays commonly equipped with reconfigurable hardware components that are exploited to solve different computational problems

Wireless Sensor Networks Node with Remote HW/SW Reconfiguration Capabilities

The inclusion of reconfigurable HW in nodes for Wireless Sensor Networks (WSNs) is not a common issue in the framework of the design of state of the art HW platforms for WSNs, mainly due to its high power consumption. But, on the other hand, reconfigurable logic as FPGAs can contribute to improve the system performance by providing not only HW acceleration as it has already been demonstrated by several research groups, but also the possibility of node HW updates after WSN deployment. This paper presents an entire working flow to generate, remotely configure and reconfigure the HW and SW in a reconfigurable node platform for WSNs. The presented reconfiguration working flow targets the custom HW platform designed at CEI (Centro de Electronica Industrial), where the processing is carried out by both a microcontroller and a partially reconfigurable Xilinx FPGA. The presented reconfiguration process is based on the JTAG protocol and thus permits to port the system to new, less power consuming FPGAs that are appearing in the market to solve problems related to energy lifetim

Optimising runtime reconfigurable designs for high performance applications

This thesis proposes novel optimisations for high performance runtime reconfigurable designs. For a reconfigurable design, the proposed approach investigates idle resources introduced by static design approaches, and exploits runtime reconfiguration to eliminate the inefficient resources. The approach covers the circuit level, the function level, and the system level. At the circuit level, a method is proposed for tuning reconfigurable designs with two analytical models: a resource model for computational and memory resources and memory bandwidth, and a performance model for estimating execution time. This method is applied to tuning implementations of finite-difference algorithms, optimising arithmetic operators and memory bandwidth based on algorithmic parameters, and eliminating idle resources by runtime reconfiguration. At the function level, a method is proposed to automatically identify and exploit runtime reconfiguration opportunities while optimising resource utilisation. The method is based on Reconfiguration Data Flow Graph, a new hierarchical graph structure enabling runtime reconfigurable designs to be synthesised in three steps: function analysis, configuration organisation, and runtime solution generation. At the system level, a method is proposed for optimising reconfigurable designs by dynamically adapting the designs to available runtime resources in a reconfigurable system. This method includes two steps: compile-time optimisation and runtime scaling, which enable efficient workload distribution, asynchronous communication scheduling, and domain-specific optimisations. It can be used in developing effective servers for high performance applications.Open Acces

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009) which was held Feb. 12th 2009 in Mannheim, Germany. The 1st International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009)(revised 08/2009)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009) which was held Feb. 12th 2009 in Mannheim, Germany. The 1st International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)

A Framework for implementing radiation-tolerant circuits on reconfigurable FPGAs

The outstanding versatility of SRAM-based FPGAs make them the preferred choice for implementing complex customizable circuits. To increase the amount of logic available, manufacturers are using nanometric technologies to boost logic density and reduce prices. However, the use of nanometric scales also makes FPGAs particularly vulnerable to radiation-induced faults, especially because of the increasing amount of configuration memory cells that are necessary to define their functionality. This paper describes a framework for implementing circuits immune to radiation-induced faults, based on a customized Triple Modular Redundancy (TMR) infrastructure and on a detection-and-fix controller. This controller is responsible for the detection of data incoherencies, location of the faulty module and restoration of the original configuration, without affecting the normal operation of the mission logic. A short survey of the most recent data published concerning the impact of radiation-induced faults in FPGAs is presented to support the assumptions underlying our proposed framework. A detailed explanation of the controller functionality is also provided, followed by an experimental case study