A multiple-SIMD architecture for image and tracking analysis

The computational requirements for real-time image based applications are such as to warrant the use of a parallel architecture. Commonly used parallel architectures conform to the classifications of Single Instruction Multiple Data (SIMD), or Multiple Instruction Multiple Data (MIMD). Each class of architecture has its advantages and dis-advantages. For example, SIMD architectures can be used on data-parallel problems, such as the processing of an image. Whereas MIMD architectures are more flexible and better suited to general purpose computing. Both types of processing are typically required for the analysis of the contents of an image. This thesis describes a novel massively parallel heterogeneous architecture, implemented as the Warwick Pyramid Machine. Both SIMD and MIMD processor types are combined within this architecture. Furthermore, the SIMD array is partitioned, into smaller SIMD sub-arrays, forming a Multiple-SIMD array. Thus, local data parallel, global data parallel, and control parallel processing are supported. After describing the present options available in the design of massively parallel machines and the nature of the image analysis problem, the architecture of the Warwick Pyramid Machine is described in some detail. The performance of this architecture is then analysed, both in terms of peak available computational power and in terms of representative applications in image analysis and numerical computation. Two tracking applications are also analysed to show the performance of this architecture. In addition, they illustrate the possible partitioning of applications between the SIMD and MIMD processor arrays. Load-balancing techniques are then described which have the potential to increase the utilisation of the Warwick Pyramid Machine at run-time. These include mapping techniques for image regions across the Multiple-SIMD arrays, and for the compression of sparse data. It is envisaged that these techniques may be found useful in other parallel systems

An Application Perspective on High-Performance Computing and Communications

We review possible and probable industrial applications of HPCC focusing on the software and hardware issues. Thirty-three separate categories are illustrated by detailed descriptions of five areas -- computational chemistry; Monte Carlo methods from physics to economics; manufacturing; and computational fluid dynamics; command and control; or crisis management; and multimedia services to client computers and settop boxes. The hardware varies from tightly-coupled parallel supercomputers to heterogeneous distributed systems. The software models span HPF and data parallelism, to distributed information systems and object/data flow parallelism on the Web. We find that in each case, it is reasonably clear that HPCC works in principle, and postulate that this knowledge can be used in a new generation of software infrastructure based on the WebWindows approach, and discussed in an accompanying paper

Theory and design of portable parallel programs for heterogeneous computing systems and networks

A recurring problem with high-performance computing is that advanced architectures generally achieve only a small fraction of their peak performance on many portions of real applications sets. The Amdahl\u27s law corollary of this is that such architectures often spend most of their time on tasks (codes/algorithms and the data sets upon which they operate) for which they are unsuited. Heterogeneous Computing (HC) is needed in the mid 90\u27s and beyond due to ever increasing super-speed requirements and the number of projects with these requirements. HC is defined as a special form of parallel and distributed computing that performs computations using a single autonomous computer operating in both SIMD and MIMD modes, or using a number of connected autonomous computers. Physical implementation of a heterogeneous network or system is currently possible due to the existing technological advances in networking and supercomputing. Unfortunately, software solutions for heterogeneous computing are still in their infancy. Theoretical models, software tools, and intelligent resource-management schemes need to be developed to support heterogeneous computing efficiently. In this thesis, we present a heterogeneous model of computation which encapsulates all the essential parameters for designing efficient software and hardware for HC. We also study a portable parallel programming tool, called Cluster-M, which implements this model. Furthermore, we study and analyze the hardware and software requirements of HC and show that, Cluster-M satisfies the requirements of HC environments

High-performance computing for vision

Vision is a challenging application for high-performance computing (HPC). Many vision tasks have stringent latency and throughput requirements. Further, the vision process has a heterogeneous computational profile. Low-level vision consists of structured computations, with regular data dependencies. The subsequent, higher level operations consist of symbolic computations with irregular data dependencies. Over the years, many approaches to high-speed vision have been pursued. VLSI hardware solutions such as ASIC's and digital signal processors (DSP's) have provided good processing speeds on structured low-level vision tasks. Special purpose systems for vision have also been designed. Currently, there is growing interest in using general purpose parallel systems for vision problems. These systems offer advantages of higher performance, sofavare programmability, generality, and architectural flexibility over the earlier approaches. The choice of low-cost commercial-off-theshelf (COTS) components as building blocks for these systems leads to easy upgradability and increased system life. The main focus of the paper is on effectively using the COTSbased general purpose parallel computing platforms to realize high-speed implementations of vision tasks. Due to the successful use of the COTS-based systems in a variety of high performance applications, it is attractive to consider their use for vision applications as well. However, the irregular data dependencies in vision tasks lead to large communication overheads in the HPC systems. At the University of Southern California, our research efforts have been directed toward designing scalable parallel algorithms for vision tasks on the HPC systems. In our approach, we use the message passing programming model to develop portable code. Our algorithms are specified using C and MPI. In this paper, we summarize our efforts, and illustrate our approach using several example vision tasks. To facilitate the analysis and development of scalable algorithms, a realistic computational model of the parallel system must be used. Several such models have been proposed in the literature. We use the General-purpose Distributed Memory (GDM) model which is a simple but realistic model of state-of-theart parallel machines. Using the GDM model, generic algorithmic techniques such as data remapping, overlapping of communication with computation, message packing, asynchronous execution, and communication scheduling are developed. Using these techniques, we have developed scalable algorithms for many vision tasks. For instance, a scalable algorithm for linear approximation has been developed using the asynchronous execution technique. Using this algorithm, linear feature extraction can be performed in 0.065 s on a 64 node SP-2 for a 512 × 512 image. A serial implementation takes 3.45 s for the same task. Similarly, the communication scheduling and decomposition techniques lead to a scalable algorithm for the line grouping task. We believe that such an algorithmic approach can result in the development of scalable and portable solutions for vision tasks. © 1996 IEEE Publisher Item Identifier S 0018-9219(96)04992-4.published_or_final_versio

Three Highly Parallel Computer Architectures and Their Suitability for Three Representative Artificial Intelligence Problems

Virtually all current Artificial Intelligence (AI) applications are designed to run on sequential (von Neumann) computer architectures. As a result, current systems do not scale up. As knowledge is added to these systems, a point is reached where their performance quickly degrades. The performance of a von Neumann machine is limited by the bandwidth between memory and processor (the von Neumann bottleneck). The bottleneck is avoided by distributing the processing power across the memory of the computer. In this scheme the memory becomes the processor (a smart memory ). This paper highlights the relationship between three representative AI application domains, namely knowledge representation, rule-based expert systems, and vision, and their parallel hardware realizations. Three machines, covering a wide range of fundamental properties of parallel processors, namely module granularity, concurrency control, and communication geometry, are reviewed: the Connection Machine (a fine-grained SIMD hypercube), DADO (a medium-grained MIMD/SIMD/MSIMD tree-machine), and the Butterfly (a coarse-grained MIMD Butterflyswitch machine)

Concurrent use of two programming tools for heterogeneous supercomputers

In this thesis, a demostration of the heterogeneous use of two programming paradigms for heterogeneous computing called Cluster-M and HAsC is presented. Both paradigms can efficiently support heterogeneous networks by preserving a level of abstraction which does not include any architecture mapping details. Furthermore, they are both machine independent and hence are scalable. Unlike, almost all existing heterogeneous orchestration tools which are MIMD based, HAsC is based on the fundamental concepts of SIMD associative computing. HAsC models a heterogeneous network as a coarse grained associative computer and is designed to optimize the execution of problems with large ratios of computations to instructions. Ease of programming and execution speed, not the utilization of idle resources are the primary goals of HAsC On the other hand, Cluster-M is a generic technique that can be applied to both coarse grained as well as fine grained networks. Cluster-M provides an environment for porting various tasks onto the machines in a heterogeneous suite such that resources utilization is maximized and the overall execution time is minimized. An illustration of how these two paradigms can be used together to provide an efficient medium for heterogeneous programming is included. Finally, their scalability is discussed

Parallel Computers in Signal Processing

Signal processing often requires a great deal of raw computing power for which it is important to take a look at parallel computers. The paper reviews various types of parallel computer architectures from the viewpoint of signal and image processing

Design and resource management of reconfigurable multiprocessors for data-parallel applications

FPGA (Field-Programmable Gate Array)-based custom reconfigurable computing machines have established themselves as low-cost and low-risk alternatives to ASIC (Application-Specific Integrated Circuit) implementations and general-purpose microprocessors in accelerating a wide range of computation-intensive applications. Most often they are Application Specific Programmable Circuiits (ASPCs), which are developer programmable instead of user programmable. The major disadvantages of ASPCs are minimal programmability, and significant time and energy overheads caused by required hardware reconfiguration when the problem size outnumbers the available reconfigurable resources; these problems are expected to become more serious with increases in the FPGA chip size. On the other hand, dominant high-performance computing systems, such as PC clusters and SMPs (Symmetric Multiprocessors), suffer from high communication latencies and/or scalability problems. This research introduces low-cost, user-programmable and reconfigurable MultiProcessor-on-a-Programmable-Chip (MPoPC) systems for high-performance, low-cost computing. It also proposes a relevant resource management framework that deals with performance, power consumption and energy issues. These semi-customized systems reduce significantly runtime device reconfiguration by employing userprogrammable processing elements that are reusable for different tasks in large, complex applications. For the sake of illustration, two different types of MPoPCs with hardware FPUs (floating-point units) are designed and implemented for credible performance evaluation and modeling: the coarse-grain MIMD (Multiple-Instruction, Multiple-Data) CG-MPoPC machine based on a processor IP (Intellectual Property) core and the mixed-mode (MIMD, SIMD or M-SIMD) variant-grain HERA (HEterogeneous Reconfigurable Architecture) machine. In addition to alleviating the above difficulties, MPoPCs can offer several performance and energy advantages to our data-parallel applications when compared to ASPCs; they are simpler and more scalable, and have less verification time and cost. Various common computation-intensive benchmark algorithms, such as matrix-matrix multiplication (MMM) and LU factorization, are studied and their parallel solutions are shown for the two MPoPCs. The performance is evaluated with large sparse real-world matrices primarily from power engineering. We expect even further performance gains on MPoPCs in the near future by employing ever improving FPGAs. The innovative nature of this work has the potential to guide research in this arising field of high-performance, low-cost reconfigurable computing. The largest advantage of reconfigurable logic lies in its large degree of hardware customization and reconfiguration which allows reusing the resources to match the computation and communication needs of applications. Therefore, a major effort in the presented design methodology for mixed-mode MPoPCs, like HERA, is devoted to effective resource management. A two-phase approach is applied. A mixed-mode weighted Task Flow Graph (w-TFG) is first constructed for any given application, where tasks are classified according to their most appropriate computing mode (e.g., SIMD or MIMD). At compile time, an architecture is customized and synthesized for the TFG using an Integer Linear Programming (ILP) formulation and a parameterized hardware component library. Various run-time scheduling schemes with different performanceenergy objectives are proposed. A system-level energy model for HERA, which is based on low-level implementation data and run-time statistics, is proposed to guide performance-energy trade-off decisions. A parallel power flow analysis technique based on Newton\u27s method is proposed and employed to verify the methodology

Mapping of portable parallel programs

An efficient parallel program designed for a parallel architecture includes a detailed outline of accurate assignments of concurrent computations onto processors, and data transfers onto communication links, such that the overall execution time is minimized. This process may be complex depending on the application task and the target multiprocessor architecture. Furthermore, this process is to be repeated for every different architecture even though the application task may be the same. Consequently, this has a major impact on the ever increasing cost of software development for multiprocessor systems. A remedy for this problem would be to design portable parallel programs which can be mapped efficiently onto any computer system. In this dissertation, we present a portable programming tool called Cluster-M. The three components of Cluster-M are the Specification Module, the Representation Module, and the Mapping Module. In the Specification Module, for a given problem, a machine-independent program is generated and represented in the form of a clustered task graph called Spec graph. Similarly, in the Representation Module, for a given architecture or heterogeneous suite of computers, a clustered system graph called Rep graph is generated. The Mapping Module is responsible for efficient mapping of Spec graphs onto Rep graphs. As part of this module, we present the first algorithm which produces a near-optimal mapping of an arbitrary non-uniform machine-independent task graph with M modules, onto an arbitrary non-uniform task-independent system graph having N processors, in 0(M P) time, where P = max(M, N). Our experimental results indicate that Cluster-M produces better or similar mapping results compared to other leading techniques which work only for restricted task or system graphs