Sähköisen identiteetin toteuttaminen TPM 2.0 -laitteistolla

Most of the financial, healthcare, and governmental services are available on Internet, where traditional identification methods used on face-to-face identification are not possible. Identification with username and password is a mediocre solution and therefore some services require strong authentication. Finland has three approved strong authentication methods: smart cards, bank credentials, and mobile ID. Out of the three authentication methods, only the government issued smart card is available to everyone who police can identify reliably. Bank credentials require identification with an identity document from Finland or other European Economic Area (EEA) country. Mobile ID explicitly require identification with Finnish identity document. The problem with smart cards is the requirement for a reader, slow functioning, and requirement for custom driver. A TPM could function as a replacement for a smart card with accompanying software library. In this thesis, I created a PKCS #11 software library that allows TPM to be used for browser based authentication according to draft specification by Finnish population registry. The keys used for authentication are created, stored and used securely inside the TPM. TPMs are deemed viable replacement for smart cards. The implemented system is faster to use than smart cards and has similar security properties as smart cards have. The created library contains implementations for 30% of all TPM 2.0 functions and could be used as a base for further TPM 2.0 based software.Pankki-, terveys- ja julkiset palvelut ovat suureksi osin saatavilla internetin välityksellä. Tunnistautuminen käyttäjätunnuksella ja salasanalla ei takaa riittävää luotettavuutta, vaan joissain palveluissa on käytettävä vahvaa tunnistautumista. Suomessa on tällä hetkellä käytössä kolme vahvaa tunnistautumisvälinettä: pankkien käyttämät verkkopankkitunnukset, Väestörekisterikeskuksen kansalaisvarmenne ja teleyritysten mobiilivarmenteet. Näistä kolmesta kansalaisvarmenne on ainoa, joka ei vaadi asiakkuutta ja on täten kaikille saatavilla, jotka poliisi voi luotettavasti tunnistaa. Verkkopankkitunnukset vaativat tunnistautumisen suomalaisella tai Euroopan talousalueen (ETA) valtion myöntämällä henkilötodistus. Mobiilivarmenne myönnetään vain henkilölle, joka voidaan tunnistaa suomalaisella henkilötodistuksella. Kansalaisvarmenne on kuitenkin älykortti kaikkine älykortin ongelmineen: sen käyttämiseen tarvitaan erillinen lukija, sen toiminta on hidasta ja se vaatii erillisen laiteajurin. Tämän työn tavoitteena on luoda ratkaisu, jolla älykorttipohjainen tunnistautuminen voidaan toteuttaa tietokoneissa olevan TPM-piirin avulla. Tässä diplomityössä luotiin PKCS #11 -rajapinnan täyttävä ohjelmistokirjasto, joka mahdollistaa TPM-piirin käyttämisen tunnistautumiseen selaimessa Väestörekisterikeskuksen laatiman määritelmän luonnoksen mukaan. Tunnistautumisavaimet luodaan, tallennetaan ja niitä käytetään TPM:ssa, mikä varmistaa avainten luottamuksellisuuden. Älykortin toiminnallisuudet todettiin mahdolliseksi toteuttaa TPM-piirillä. Toteutettu järjestelmä on nopeampi käyttää kuin älykortti ja se takaa älykortteja vastaavan tietoturvatason. Työn tuloksena tehty kirjasto toteuttaa 30 % kaikista TPM 2.0 -ohjelmistorajapinnoista, ja kirjastoa voidaan käyttää osana tulevia TPM 2.0 -ohjelmistoja

Offloading cryptographic services to the SIM card in smartphones

Smartphones have achieved ubiquitous presence in people’s everyday life as communication, entertainment and work tools. Touch screens and a variety of sensors offer a rich experience and make applications increasingly diverse, complex and resource demanding. Despite their continuous evolution and enhancements, mobile devices are still limited in terms of battery life, processing power, storage capacity and network bandwidth. Computation offloading stands out among the efforts to extend device capabilities and face the growing gap between demand and availability of resources. As most popular technologies, mobile devices are attractive targets for malicious at- tackers. They usually store sensitive private data of their owners and are increasingly used for security sensitive activities such as online banking or mobile payments. While computation offloading introduces new challenges to the protection of those assets, it is very uncommon to take security and privacy into account as the main optimization objectives of this technique. Mobile OS security relies heavily on cryptography. Available hardware and software cryptographic providers are usually designed to resist software attacks. This kind of protection is not enough when physical control over the device is lost. Secure elements, on the other hand, include a set of protections that make them physically tamper-resistant devices. This work proposes a computation offloading technique that prioritizes enhancing security capabilities in mobile phones by offloading cryptographic operations to the SIM card, the only universally present secure element in those devices. Our contributions include an architecture for this technique, a proof-of-concept prototype developed under Android OS and the results of a performance evaluation that was conducted to study its execution times and battery consumption. Despite some limitations, our approach proves to be a valid alternative to enhance security on any smartphone.Los smartphones están omnipresentes en la vida cotidiana de las personas como herramientas de comunicación, entretenimiento y trabajo. Las pantallas táctiles y una variedad de sensores ofrecen una experiencia superior y hacen que las aplicaciones sean cada vez más diversas, complejas y demanden más recursos. A pesar de su continua evolución y mejoras, los dispositivos móviles aún están limitados en duración de batería, poder de procesamiento, capacidad de almacenamiento y ancho de banda de red. Computation offloading se destaca entre los esfuerzos para ampliar las capacidades del dispositivo y combatir la creciente brecha entre demanda y disponibilidad de recursos. Como toda tecnología popular, los smartphones son blancos atractivos para atacantes maliciosos. Generalmente almacenan datos privados y se utilizan cada vez más para actividades sensibles como banca en línea o pagos móviles. Si bien computation offloading presenta nuevos desafíos al proteger esos activos, es muy poco común tomar seguridad y privacidad como los principales objetivos de optimización de dicha técnica. La seguridad del SO móvil depende fuertemente de la criptografía. Los servicios criptográficos por hardware y software disponibles suelen estar diseñados para resistir ataques de software, protección insuficiente cuando se pierde el control físico sobre el dispositivo. Los elementos seguros, en cambio, incluyen un conjunto de protecciones que los hacen físicamente resistentes a la manipulación. Este trabajo propone una técnica de computation offloading que prioriza mejorar las capacidades de seguridad de los teléfonos móviles descargando operaciones criptográficas a la SIM, único elemento seguro universalmente presente en los mismos. Nuestras contribuciones incluyen una arquitectura para esta técnica, un prototipo de prueba de concepto desarrollado bajo Android y los resultados de una evaluación de desempeño que estudia tiempos de ejecución y consumo de batería. A pesar de algunas limitaciones, nuestro enfoque demuestra ser una alternativa válida para mejorar la seguridad en cualquier smartphone

Adding security and privacy to genomic information representation

Provision of security and privacy to genomic data is a key issue in current genomic information representation. Existing formats do not give a solution to these issues (or they provide a partial one), so new solutions are demanded. MPEG-G (ISO/IEC 23092, Genomic Information Representation) is an International Standard for the representation of genomic information being defined by the MPEG Committee (Moving Pictures Expert Group, ISO/IEC JTC1 SC29/WG11). We provide flexible protection to the information stored inside the MPEG-G format with a combination of security techniques and privacy rules.Peer ReviewedPostprint (published version

Tiqr: a novel take on two-factor authentication

Authentication is of paramount importance for all modern networked applications. The username/password paradigm is ubiquitous. This paradigm suffices for many applications that require a relatively low level of assurance about the identity of the end user, but it quickly breaks down when a stronger assertion of the user’s identity is required. Traditionally, this is where two- or multi-factor authentication comes in, providing a higher level of assurance. There is a multitude of two-factor authentication solutions available, but we feel that many solutions do not meet the needs of our community. They are invariably expensive, difficult to roll out in heterogeneous user groups (like student populations), often closed source and closed technology and have usability problems that make them hard to use. In this paper we will give an overview of the two-factor au- thentication landscape and address the issues of closed versus open solutions. We will introduce a novel open standards-based authentication technology that we have developed and released in open source. We will then provide a classification of two-factor authentication technologies, and we will finish with an overview of future work

Strong Electronic Identification: Survey & Scenario Planning

The deployment of more high-risk services such as online banking and government services on the Internet has meant that the need and demand for strong electronic identity is bigger today more than ever. Different stakeholders have different reasons for moving their services to the Internet, including cost savings, being closer to the customer or citizen, increasing volume and value of services among others. This means that traditional online identification schemes based on self-asserted identities are no longer sufficient to cope with the required level of assurance demanded by these services. Therefore, strong electronic identification methods that utilize identifiers rooted in real world identities must be provided to be used by customers and citizens alike on the Internet. This thesis focuses on studying state-of-the-art methods for providing reliable and mass market strong electronic identity in the world today. It looks at concrete real-world examples that enable real world identities to be transferred and used in the virtual world of the Internet. The thesis identifies crucial factors that determine what constitutes a strong electronic identity solution and through these factors evaluates and compares the example solutions surveyed in the thesis. As the Internet become more pervasive in our lives; mobile devices are becoming the primary devices for communication and accessing Internet services. This has thus, raised the question of what sort of strong electronic identity solutions could be implemented and how such solutions could adapt to the future. To help to understand the possible alternate futures, a scenario planning and analysis method was used to develop a series of scenarios from underlying key economic, political, technological and social trends and uncertainties. The resulting three future scenarios indicate how the future of strong electronic identity will shape up with the aim of helping stakeholders contemplate the future and develop policies and strategies to better position themselves for the future

Strong Electronic Identification: Survey & Scenario Planning

The deployment of more high-risk services such as online banking and government services on the Internet has meant that the need and demand for strong electronic identity is bigger today more than ever. Different stakeholders have different reasons for moving their services to the Internet, including cost savings, being closer to the customer or citizen, increasing volume and value of services among others. This means that traditional online identification schemes based on self-asserted identities are no longer sufficient to cope with the required level of assurance demanded by these services. Therefore, strong electronic identification methods that utilize identifiers rooted in real world identities must be provided to be used by customers and citizens alike on the Internet. This thesis focuses on studying state-of-the-art methods for providing reliable and mass market strong electronic identity in the world today. It looks at concrete real-world examples that enable real world identities to be transferred and used in the virtual world of the Internet. The thesis identifies crucial factors that determine what constitutes a strong electronic identity solution and through these factors evaluates and compares the example solutions surveyed in the thesis. As the Internet become more pervasive in our lives; mobile devices are becoming the primary devices for communication and accessing Internet services. This has thus, raised the question of what sort of strong electronic identity solutions could be implemented and how such solutions could adapt to the future. To help to understand the possible alternate futures, a scenario planning and analysis method was used to develop a series of scenarios from underlying key economic, political, technological and social trends and uncertainties. The resulting three future scenarios indicate how the future of strong electronic identity will shape up with the aim of helping stakeholders contemplate the future and develop policies and strategies to better position themselves for the future

Erilaiset tunnistautumismenetelmät web-sovelluksissa

Today various modern software applications are implemented as web applications. The applications are running on a web server and only the user interfaces and interactions are transferred over the internet. It is also very common that the applications have limitations that who can use them and therefore an access control system is needed. A usual way to limit the access is to show user a login page and require a correct combination of the username and password. Though this may be the most ordinary way, it is definitely not the most secure way. When the security requirements for the system are higher, a better solution is needed. Fortunately, there are more secure ways to authenticate users. They include, for example, fingerprint scanning, voice recognition and smart cards. In this thesis we are concentrating on the last one of those: smart cards. The purpose of this thesis is to investigate possibility of using smart card authentication in web applications. This thesis was written as a part of a customer project that also included a proof of concept system implementation and documentation. The authentication system was implemented as a feature to an existing web application. Objective of the project was to develop an end-to-end demo and to find out what would it need to productize such a system. In the developed proof of concept authentication system, users were able to log in to the application by using smart cards. In the demo system, not all the features that would be needed for a complete smart card authentication solution were implemented but they were identified and documented. Implementing a complete authentication system would require a full infrastructure for managing the smart cards. With enough time it would be possible to develop such a system