The Modeling and Stability Analysis of Humans Balancing an Inverted Pendulum

The control of an inverted pendulum is a classical problem in dynamics and control theory. Without active control, the inverted pendulum by itself is inherently unstable, thus serving as an ideal platform for control algorithms design and testing. This study utilizes an inverted pendulum setup to investigate the characteristics of manual control in executing a single-axial compensatory task. An inverted pendulum with sliding base on a single-axial rail was built for this purpose. Human subjects were asked to stabilize the pendulum by sliding the base on the rail. To mathematically quantify the characteristics of human manual control, a quasi-linear lead-lag with time delay model was chosen for the human operator. The mathematical model for the inverted pendulum was derived using the LaGrange\u27s method. Using these two models, a simulation of the closed-loop human-inverted pendulum system was built in Matlab/Simulink. The stability conditions of the closed-loop system were derived by applying the Routh-Hurwitz stability criterion to the system. This completes the modeling and simulation of the process of humans balancing an inverted pendulum. The Matlab simulation serves as a validation tool in this study. The data of the human subject\u27s input and the inverted pendulum\u27s output generated from the simulation were used to estimate the parameters assumed in the mathematical model for the human operator. The estimation algorithm employed is a Kalman filter. Results show that the estimations do converge very quickly to the parameters set in the simulated human controller and can stabilize the inverted pendulum when fed back into the simulation. This verifies the plausibility of the mathematical structure for the human operator and the validity of the estimator. Experimentally, the pendulum\u27s angle deflections from the vertical position and the human subjects\u27 hand positions were recorded using a motion capture system called VICON. Using the same estimator developed for processing the simulation data, the collected experimental data were processed to estimate the parameters in the model for the human operator when the human operator actually carries out the task of balancing the inverted pendulum. The estimated parameters from the experimental data were then fed into the simulation model. The characteristics of the human operator were analyzed using the estimated parameters

Advantages of Fuzzy Control While Dealing with Complex/ Unknown Model Dynamics: A Quadcopter Example

Commonly, complex and uncertain plants cannot be faced through well-known linear approaches. Most of the time, complex controllers are needed to attain expected stability and robustness; however, they usually lack a simple design methodology and their actual implementation is difficult (if not impossible). Fuzzy logic control is an intelligent technique which, on its basis, allows the translation from logic statements to a nonlinear mapping. Although it has been proven to effectively deal with complex plants, many recent studies have moved away from the basic premise of linguistic interpretability. In this work, a simple fuzzy controller is designed in a clear way, privileging design easiness and logical consistency of linguistic operators. It is simulated together to a nonlinear model of a quadcopter with added actuators variability, so the robust operation of the controller is also proven. Uneven gain, bandwidth, and time-delay variations are applied among quadcopter’s motors, so the simulations results enclose those characteristics which could be found in reality. As those variations can be related to actuators’ performance, an analysis can be driven in terms of the features which are not commonly included in mathematical models like power electronics drives or electric machinery. These considerations may shorten the gap between simulation and actual implementation of the fuzzy controller. Briefly, this chapter presents a simple fuzzy controller which deals with a quadcopter plant as a first approach to intelligent control

New developments in mathematical control and information for fuzzy systems

Hamid Reza Karimi, Mohammed Chadli and Peng Sh

Consensus of multi-agent systems with faults and mismatches under switched topologies using a delta operator method

© 2018 Elsevier B.V. This paper studies the consensus of multi-agent systems with faults and mismatches under switched topologies using a delta operator method. Since faults and mismatches can result in failure of the consensus even for a fixed topology with a spanning tree, how to reach a consensus is a complicated and challenging problem under such circumstances especially when part topologies have no spanning tree. Although some works studied the influence of faults and mismatches on the consensus, there is little work on reaching a consensus for the multi-agent systems with faults and mismatches. In this paper, we introduce the delta operator to unify the consensus analysis for continuous, discrete, or sampled systems under one framework. We develop the theories on the delta operator systems first and then apply theories of the delta operator systems to the consensus problems. By converting the consensus problems into stability problems, we investigate and prove consensus and the associated conditions for systems 1) without any fault, 2) with a known fault, and 3) with unknown faults, under switching topologies with matching or mismatching coefficients. Numerical examples are provided and validate the effectiveness of the theoretical results

Modeling, optimization, and control for complex networked systems

n/

Deep Space Network information system architecture study

The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control