Low energy digital circuit design using sub-threshold operation

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, February 2006.Includes bibliographical references (p. 189-202).Scaling of process technologies to deep sub-micron dimensions has made power management a significant concern for circuit designers. For emerging low power applications such as distributed micro-sensor networks or medical applications, low energy operation is the primary concern instead of speed, with the eventual goal of harvesting energy from the environment. Sub-threshold operation offers a promising solution for ultra-low-energy applications because it often achieves the minimum energy per operation. While initial explorations into sub-threshold circuits demonstrate its promise, sub-threshold circuit design remains in its infancy. This thesis makes several contributions that make sub-threshold design more accessible to circuit designers. First, a model for energy consumption in sub-threshold provides an analytical solution for the optimum VDD to minimize energy. Fitting this model to a generic circuit allows easy estimation of the impact of processing and environmental parameters on the minimum energy point. Second, analysis of device sizing for sub-threshold circuits shows the trade-offs between sizing for minimum energy and for minimum voltage operation.(cont.) A programmable FIR filter test chip fabricated in 0.18pum bulk CMOS provides measurements to confirm the model and the sizing analysis. Third, a low-overhead method for integrating sub-threshold operation with high performance applications extends dynamic voltage scaling across orders of magnitude of frequency and provides energy scalability down to the minimum energy point. A 90nm bulk CMOS test chip confirms the range of operation for ultra-dynamic voltage scaling. Finally, sub-threshold operation is extended to memories. Analysis of traditional SRAM bitcells and architectures leads to development of a new bitcell for robust sub-threshold SRAM operation. The sub-threshold SRAM is analyzed experimentally in a 65nm bulk CMOS test chip.by Benton H. Calhoun.Ph.D

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Quantum and spin-based tunneling devices for memory systems

Rapid developments in information technology, such as internet, portable computing, and wireless communication, create a huge demand for fast and reliable ways to store and process information. Thus far, this need has been paralleled with the revolution in solid-state memory technologies. Memory devices, such as SRAM, DRAM, and flash, have been widely used in most electronic products. The primary strategy to keep up the trend is miniaturization. CMOS devices have been scaled down beyond sub-45 nm, the size of only a few atomic layers. Scaling, however, will soon reach the physical limitation of the material and cease to yield the desired enhancement in device performance. In this thesis, an alternative method to scaling is proposed and successfully realized. The proposed scheme integrates quantum devices, Si/SiGe resonant interband tunnel diodes (RITD), with classical CMOS devices forming a microsystem of disparate devices to achieve higher performance as well as higher density. The device/circuit designs, layouts and masks involving 12 levels were fabricated utilizing a process that incorporates nearly a hundred processing steps. Utilizing unique characteristics of each component, a low-power tunneling-based static random access memory (TSRAM) has been demonstrated. The TSRAM cells exhibit bistability operation with a power supply voltage as low as 0.37 V. Various TSRAM cells were also constructed and their latching mechanisms have been extensively investigated. In addition, the operation margins of TSRAM cells are evaluated based on different device structures and temperature variation from room temperature up to 200oC. The versatility of TSRAM is extended beyond the binary system. Using multi-peak Si/SiGe RITD, various multi-valued TSRAM (MV-TSRAM) configurations that can store more than two logic levels per cell are demonstrated. By this virtue, memory density can be substantially increased. Using two novel methods via ambipolar operation and utilization of enable/disable transistors, a six-valued MV-TSRAM cell are demonstrated. A revolutionary novel concept of integrating of Si/SiGe RITD with spin tunnel devices, magnetic tunnel junctions (MTJ), has been developed. This hybrid approach adds non-volatility and multi-valued memory potential as demonstrated by theoretical predictions and simulations. The challenges of physically fabricating these devices have been identified. These include process compatibility and device design. A test bed approach of fabricating RITD-MTJ structures has been developed. In conclusion, this body of work has created a sound foundation for new research frontiers in four different major areas: integrated TSRAM system, MV-TSRAM system, MTJ/RITD-based nonvolatile MRAM, and RITD/CMOS logic circuits

A Charge-Recycling Scheme and Ultra Low Voltage Self-Startup Charge Pump for Highly Energy Efficient Mixed Signal Systems-On-A-Chip

The advent of battery operated sensor-based electronic systems has provided a pressing need to design energy-efficient, ultra-low power integrated circuits as a means to improve the battery lifetime. This dissertation describes a scheme to lower the power requirement of a digital circuit through the use of charge-recycling and dynamic supply-voltage scaling techniques. The novel charge-recycling scheme proposed in this research demonstrates the feasibility of operating digital circuits using the charge scavenged from the leakage and dynamic load currents inherent to digital design. The proposed scheme efficiently gathers the “ground-bound” charge into storage capacitor banks. This reclaimed charge is then subsequently recycled to power the source digital circuit. The charge-recycling methodology has been implemented on a 12-bit Gray-code counter operating at frequencies of less than 50 MHz. The circuit has been designed in a 90-nm process and measurement results reveal more than 41% reduction in the average energy consumption of the counter. The total energy savings including the power consumed for the generation of control signals aggregates to an average of 23%. The proposed methodology can be applied to an existing digital path without any design change to the circuit but with only small loss to the performance. Potential applications of this scheme are described, specifically in wide-temperature dynamic power reduction and as a source for energy harvesters. The second part of this dissertation deals with the design and development of a self-starting, ultra-low voltage, switched-capacitor (SC) DC-DC converter that is essential to an energy harvesting system. The proposed charge-pump based SC-converter operates from 125-mV input and thus enables battery-less operation in ultra-low voltage energy harvesters. The charge pump does not require any external components or expensive post-fabrication processing to enable low-voltage operation. This design has been implemented in a 130-nm CMOS process. While the proposed charge pump provides significant efficiency enhancement in energy harvesters, it can also be incorporated within charge recycling systems to facilitate adaptable charge-recycling levels. In total, this dissertation provides key components needed for highly energy-efficient mixed signal systems-on-a-chip

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

Development, Demonstration, and Device Physics of FET-Accessed One-Transistor GaAs Dynamic Memory Technologies

The introduction of digital GaAs into modem high-speed computing systems has led to an increasing demand for high-density memory in these GaAs technologies. To date, most of the memory development efforts in GaAs have been directed toward four- and six-transistor static RAM\u27s, which consume substantial chip area and dissipate much static power resulting in limited single-chip GaAs storage capacities. As it has successfully done in silicon, a one-transistor dynamic RAM approach could alleviate these problems making higher density GaAs memories possible. This dissertation discusses theoretical and experimental work that presents the possibility for a high-speed, low-power, one-transistor dynamic RAM technology in GaAs. The two elements of the DRAM cell, namely the charge storage capacitor and the access field-effect transistor have been studied in detail. Isolated diode junction charge storage capacitors have demonstrated 30 minutes of storage time at room temperature with charge densities comparable to those obtained in planar silicon DRAM capacitors. GaAs JFET and MESFET technologies have been studied, and with careful device design and choice of proper operating voltages experimental results show that both can function as acceptable access transistors. One-transistor MESFET- and JFET-accessed DRAM cells have been fabricated and operated at room temperature and above with a standby power dissipation that is only a small fraction of the power dissipated by the best commercial GaAs static RAM cells. A 2 x 2 bit demonstration array was built and successfully operated at room temperature to demonstrate the addressable read/write capability of this new technology

A design methodology for robust, energy-efficient, application-aware memory systems

Memory design is a crucial component of VLSI system design from area, power and performance perspectives. To meet the increasingly challenging system specifications, architecture, circuit and device level innovations are required for existing memory technologies. Emerging memory solutions are widely explored to cater to strict budgets. This thesis presents design methodologies for custom memory design with the objective of power-performance benefits across specific applications. Taking example of STTRAM (spin transfer torque random access memory) as an emerging memory candidate, the design space is explored to find optimal energy design solution. A thorough thermal reliability study is performed to estimate detection reliability challenges and circuit solutions are proposed to ensure reliable operation. Adoption of the application-specific optimal energy solution is shown to yield considerable energy benefits in a read-heavy application called MBC (memory based computing). Circuit level customizations are studied for the volatile SRAM (static random access memory) memory, which will provide improved energy-delay product (EDP) for the same MBC application. Memory design has to be aware of upcoming challenges from not only the application nature but also from the packaging front. Taking 3D die-folding as an example, SRAM performance shift under die-folding is illustrated. Overall the thesis demonstrates how knowledge of the system and packaging can help in achieving power efficient and high performance memory design.Ph.D

Study and development of low power consumption SRAMs on 28 nm FD-SOI CMOS process

Since analog circuit designs in CMOS nanometer (< 90 nm) nodes can be substantially affected by manufacturing process variations, circuit performance becomes more challenging to achieve efficient solutions by using analytical models. Extensive simulations are thus commonly required to provide a high yield. On the other hand, due to the fact that the classical bulk MOS structure is reaching scaling limits (< 32 nm), alternative approaches are being developed as successors, such as fully depleted silicon-oninsulator (FD-SOI), Multigate MOSFET, FinFETs, among others, and new design techniques emerge by taking advantage of the improved features of these devices. This thesis focused on the development of analytical expressions for the major performance parameters of the SRAM cache implemented in 28 nm FD-SOI CMOS, mainly to explore the transistor dimensions at low computational cost, thereby producing efficient designs in terms of energy consumption, speed and yield. By taking advantage of both low computational cost and close agreement results of the developed models, in this thesis we were able to propose a non-traditional sizing procedure for the simple 6T-SRAM cell, that unlike the traditional thin-cell design, transistor lengths are used as a design variable in order to reduce the static leakage. The single-P-well (SPW) structure in combination with reverse-body-biasing (RBB) technique were used to achieve a better balance between P-type and N-type transistors. As a result, we developed a 128 kB SRAM cache, whose post-layout simulations show that the circuit consumes an average energy per operation of 0.604 pJ/word-access (64 I/O bits) at supply voltage of 0.45 V and operation frequency of 40 MHz. The total chip area of the 128 kB SRAM cache is 0.060 mm2 .O projeto de circuitos analogicos em processos nanométricos CMOS ( < 90 nm) per substancialmente afetado pelas variacões do processo de fabricacão, sendo cada vez mais desafiador para os projetistas alcançar soluções eficientes no desempenho dos circuitos mediante o uso de modelos analíticos. Simulacões extensas com alto custo com- putacional sao normalmente requeridas para providenciar um correto funcionamento do circuito. Por outro lado, devido ao fato que a estrutura bulk-CMOS esta alcançando seus limites de escala (< 32 nm), outros transistores foram desenvolvidos como sucessores, tais como o fully depleted silicon-on-insulator (FD-SOI), Multigate MOSFET, entre outros, surgindo novas tecnicas de projeto que utilizam as características aprimoradas destes dispositivos. Dessa forma, esta tese de doutorado se foca no desenvolvimento de modelos analíticos dos parametros mais importantes do cache SRAM implementado em processo CMOS FD-SOI de 28 nm, principalmente para explorar as dimensõoes dos transistores com baixo custo computacional, e assim produzir solucões eficientes em termos de consumo de energia, velocidade e rendimento. Aproveitando o baixo custo computacional e a alta concordância dos modelos analíticos, nesta tese fomos capazes de propor um dimensionamento nao tradicional para a célula de memória 6T-SRAM, em que diferentemente é do classico dimensionamento "thin-cell”, os comprimentos dos transistores são utilizados como variável de projeto com o fim de reduzir o consumo estático de corrente. A estrutura single-P-well (SPW), combinada com a técnica reverse-body-biasing (RBB) foram utilizadas para alcançar um melhor balanço entre as correntes específicas dos transistores do tipo P e N

Energy-efficient memories for wireless sensor networks

Wireless sensor networks (WSNs) embed computation and sensing in the physical world, enabling an unprecedented spectrum of applications in several fields of daily life, such as environmental monitoring, cattle management, elderly care, and medicine to name a few. A WSN comprises sensor nodes, which represents a new class of networked embedded computer characterized by severe resource constraints. The design of a sensor node presents many challenges, as they are expected to be small, reliable, low cost, and low power, since they are powered from batteries or harvest energy from the surrounding environment. In a sensor node, the instantaneous power of the transceiver is usually several orders of magnitude higher than processing power. Nevertheless, if average power is considered in actual applications, the communication energy is only about two times higher than the processing energy. The scaling of CMOS technology provides higher performance at lower prices, enabling more refined distributed applications with augmented local processing. The increased complexity of applications demands for enlarged memory size, which in turn increases the power drain. This scenario becomes even worse as leakage power is becoming more and more important in small feature transistor sizes. In this work the energy consumption of a sensor node is characterized, and different memory architectures were investigated to be integrated in future wireless sensor networks, showing that SRAM memories with sleep state may benefit from low duty-cycle operating system. SRAM memory with power-manageable banks puts idle banks in sleep state to further reduce the leakage power, even when the system is active. Although it is a well known technique, the energy savings limits were not exhaustively stated, nor the inuence of the power management strategy adopted. We proposed a novel and detailed model of the energy saving for uniform banks with two power management schemes: a best-oracle policy and a simple greedy policy. Our model gives valuable insight into key factors (coming from the system and the workload) that are critical for reaching the maximum achievable energy saving. Thanks to our modeling, at design time a near optimum number of banks can be estimated to reach more aggressive energy savings. The memory content allocation problem was solved by an integer linear program formulation. In the framework of this thesis, experiments were carried out for two real wireless sensor network application (based on TinyOS and ContikiOS). Results showed energy reduction close to 80% for a partition overhead of 1% with a memory of ten banks for an application under high workload. Energy saving depends on the access patterns to memory and memory parameters (such as number of banks, partitioning overhead, energy reduction of the sleep state and the wake-up energy cost). The energy saving drops for low duty-cycles. However, a very significant reduction of energy can be achieved, for example, roughly 50% for a 3% duty-cycle operation using the above memory. Finally, our findings suggest that adopting an advanced power management must be carefully evaluated, since the best-oracle is only marginally better than a greedy policy.Las redes de sensores inalámbricas (RSI o WSN, por sus siglas en inglés) agregan computación y sensado al mundo fìsico, posibilitando un rango de aplicaciones sin precedentes en muchos campos de la vida cotidiana, como por ejemplo monitoreo ambiental, manejo de ganado, cuidado de personas adultas mayores y medicina, solo por mencionar algunas. Una RSI consta de nodos sensores, los cuales representan un nuevo tipo de computadora embebida en red, caracterizada por tener grandes restricciones de recursos. El diseño de un nodo sensor presenta muchos desafìos, ya que es necesario que sean, pequeños, confiables, de bajo costo y con muy bajo consumo de energía, ya que se alimentan de pilas o recolectan energía del medio. En un nodo sensor, la potencia instantánea del transceptor (radio) es usualmente algunos órdenes de magnitud mayor que la potencia de procesamiento. Sin embargo, la energía de comunicación es solamente dos veces mayor que la energía de procesamiento. Por otro lado, el escalado de la tecnología CMOS permite mayor performance a menores precios, posibilitando aplicaciones distribuídas más refinadas con más procesamiento local. El aumento de la complejidad de las aplicaciones requiere memorias de mayor tamaño, que a su vez aumenta el consumo de potencia. Este escenario empeora ya que las corrientes de fuga son cada vez más importantes en transistores de menor tamaño. En el presente trabajo de tesis se caracteriza el consumo de energía de un nodo sensor, y se investigan diferentes arquitecturas de memoria para ser integrado en las RSI futuras, mostrando como las memorias SRAM con un estado de sleep pueden ser convenientes en sistemas que operan con bajos ciclos de trabajo. Si además la memoria se divide en bancos que pueden ser controlados de manera independiente, se pueden poner los bancos inactivos en estado sleep, incluso cuando el sistema está activo. Aunque esta es una técnica conocida, los límites de ahorro de energía no habían sido exhaustivamente determinados, ni tampoco la influencia de la política de gestión de energía usado. Se propone un nuevo modelo detallado del ahorro de energía para bancos uniformes con dos políticas de gestión: best-oracle y greedy. Nuestro modelo proporciona información valiosa de los factores fundamentales (provenientes del sistema y la carga de trabajo) que son escenciales para alcanzar el máximo ahorro alcanzable. Gracias a nuestro modelado, en tiempo de diseño se puede estimar el número óptimo de bancos para lograr grandes ahorros de energía. El problema de asignación del código a los bancos fue resuelto usando programación lineal entera. En el contexto de esta tesis, se realizaron experimentos usando dos aplicaciones reales de redes de sensores inalámbricas (basadas en TinyOS y ContikiOS). Los resultados mostraron una reducción de energía cercano a 80% para un overhead de partición de 1% con una memoria de diez bancos para una aplicación con gran carga. El ahorro depende del patrón de acceso a memoria y los parámetros de la memoria (tales como cantidad de bancos, overhead de partición, reducción de energía del estado sleep y el costo energético de wake-up. El ahorro de energía decrece para ciclos de trabajo bajos. Sin embargo, igualmente se alcanzan ahorros de energía significativos, por ejemplo, aproximadamente 50% para ciclos de trabajo de 3% usando la memoria anterior. Finalmente, nuestros resultados sugieren que debe ser cuidadosamente evaluado el uso de políticas de gestón de energía avanzados, ya que la política best-oracle es sólo marginalmente mejor que la política greedy