Analysis of the economic feasibility and reduction of a building’s energy consumption and emissions when integrating hybrid solar thermal/PV/micro-CHP systems

The aim of this paper is to assess the performance of several designs of hybrid systems composed of solar thermal collectors, photovoltaic panels and natural gas internal combustion engines. The software TRNSYS 17 has been used to perform all the calculations and data processing, as well as an optimisation of the tank volumes through an add-in coupled with the GENOPT® software. The study is carried out by analysing the behaviour of the designed systems and the conventional case in five different locations of Spain with diverse climatic characteristics, evaluating the same building in all cases. Regulators, manufacturers and energy service engineers are the most interested in these results. Two major contributions in this paper are the calculations of primary energy consumption and emissions and the inclusion of a Life Cycle Cost analysis. A table which shows the order of preference regarding those criteria for each considered case study is also included. This was fulfilled in the interest of comparing between the different configurations and climatic zones so as to obtain conclusions on each of them. The study also illustrates a sensibility analysis regarding energy prices. Finally, the exhaustive literature review, the novel electricity consumption profile of the building and the illustration of the influence of the cogeneration engine working hours are also valuable outputs of this paper, developed in order to address the knowledge gap and the ongoing challenges in the field of distributed generation

Advancements in hybrid photovoltaic-thermal systems: performance evaluations and applications

Due to European Directives (2010/31/UE on buildings energy performance, 2009/28/CE on the use of renewable energy, 2012/27/UE on the energy efficiency) the electric and thermal energy needs of new and retrofitted buildings are faced by increasing percentages of renewable energy. Solar energy and heat pumps are the most promising technologies mainly in residential buildings as they have reached great maturity. Anyway, in most cases solar energy utilizations systems are thermal (which convert solar energy to thermal energy) and photovoltaic (which convert solar energy to electricity) used as separated collectors. Commercial photovoltaic modules have nowadays an efficiency around 15 % - 18 %. It means that the most relevant part of solar radiation is lost. Such a remark gets more importance if the active surface is located in an urban environment, where the availability of surfaces exposed to the sun is scarce if compared to the buildings thermal loads. PhotoVoltaic / Thermal cogeneration (PV/T) aims to utilize the same area both for producing electricity and heat. As solar cells are sensitive to temperature (their efficiency lowers when temperature increases), heat is beneficially collected but it cannot be available at high temperatures. Many researches on performances and characteristics of different hybrid photovoltaic\u2013thermal technologies and systems have been carried out during the last years to face this problem; among these designs, systems utilizing air, liquid, heat pipes, phase change materials, and thermoelectric devices to aid cooling of PV cells. This paper provides a description of the applications of the photovoltaic\u2013thermal systems, such as building integrated PV/T, concentrating PV/T systems and photovoltaic\u2013thermal heat pump systems. Several factors affecting the performances and characteristics of the photovoltaic\u2013thermal systems are also summarized

Floating solar panel park

Treball desenvolupat dins el marc del programa 'European Project Semester'.This Final Report is the culmination of a four month long design study on floating solar panel park feasibility in Vaasa, Finland. The Floating Ideas Team was tasked with coming up with a design that would not only work, but also make a profit. The team focused a lot of time on initial research, an iterative design process, and experiments to gather information that could not be found during the research phase. In this report, one can expect to find the major findings from research in many different areas such as location, panel design, flotation design, cooling techniques, and efficiency adding techniques. The first takeaway is that implementing floating solar parks in Finland would require adding efficiency techniques such as mirrors or concentrators. Second, how the panels are placed means a lot in a location so far north. Placing the panels far away from each other and horizontally will reduce the negative impact of shadows. And third, the rotation of the structure is important in increasing efficiency. Multiple axis tracking is not necessary, but tracking in the vertical axis can add a 50% increase in power generated. This research then lead into the defining of four initial designs which were eventually paired down into one. The largest factors leading to the change in design were the combination of rotation and anchoring methods, the flotation structure, and the structure required hold the panel modules together. In the end, the final design is a modular circular design with panels and mirrors to help add efficiency, approximately 37%. From there, an economic and environmental feasibility study was done and for both, this design was deemed feasible for Finland. With the design, detailed in this report, it would be possible to implement this and make a profit off of it, leading the team to believe that this should be implemented in places looking for alternatives for renewable energy production

An Economic, Energy, and Environmental Analysis of PV/Micro-CHP Hybrid Systems: A Case Study of a Tertiary Building

Our present standard of living depends strongly on energy sources, with buildings being a primary focus when it comes to reducing energy consumption due to their large contribution, especially in tertiary buildings. The goal of the present study is to evaluate the performance of two different designs of hybrid systems, composed of natural gas engines and photovoltaic panels. This will be done through simulations in TRNSYS, considering a representative office building with various schedules of operation (8, 12, and 24 h), as well as different climates in Spain. The main contributions of this paper are the evaluations of primary energy-consumption, emissions, and economic analyses for each scenario. In addition, a sensitivity analysis is carried out to observe the influence of energy prices, as well as that of the costs of the micro-CHP engines and PV modules. The results show that the scenario with the conventional system and PV modules is the most profitable one currently. However, if electricity prices are increased in the future or natural gas prices are reduced, the scenario with micro-CHP engines and PV modules will become the most profitable option. Energy service engineers, regulators, and manufacturers are the most interested in these results

Assessing and benchmarking the performance of advanced building facades

This chapter describes the energy demand reshaping and supply technologies that may be encapsulated within an advanced building façade - for example, transparent and breathable insulation, advanced glazing, daylight capture, photovoltaic components and ducted wind turbines. Laboratory testing techniques for the characterisation of the fundamental parameters underlying each technology are elaborated as the essential prerequisite of integrated performance appraisals of specific technology combinations within an advanced façade design context. Based on the results from simulations undertaken in the UK climate context, performance benchmarks are suggested for some principal façade configurations