Optimization of Dynamic Forces in Mechanical Hands

Mechanical hands have become of greater interest in robotics due Introduction Mechanical hands offer certain advantages over conventional robotic grippers in tasks which require dextrous manipulation. However, they are also much more complex mechanical systems and their design and control must take into account the forces which can be generated during grasping. One problem which has been of recent interest is that of finding the finger/object contact forces and the actuator torques necessary to effect a prescribed motion of the hand/object system. However, when an object is grasped, the hand becomes redundantlyactuated and the dynamic force equations do not have a unique solution. Orin and Oh (1981) noted this problem while developing a technique to determine forces in a very similar problem: the design of walking machines. They proposed a linear-programming approach to obtain an optimum solution which minimized the energy consumption of the system. Kerr and Roth (1986) proposed a more conservative application of linear programming which maximized the "distance" from the solution to the inequality constraints. However, linear programming has certain disadvantages. It can produce solutions which are discontinuous for small changes in the constraints (typical of the motion of a hand during its task) when the constraints become parallel to the objective. As well, linear programming cannot be used to minimize the "internal forces" in the handobject system. These forces can be thought of as those which tend to crush the object or, alternatively, as those which do not contribute to the motion of the hand/object system

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 344)

This bibliography lists 125 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during January, 1989. Subject coverage includes: aerospace medicine and psychology, life support systems and controlled environments, safety equipment, exobiology and extraterrestrial life, and flight crew behavior and performance

Online augmentation of learned grasp sequence policies for more adaptable and data-efficient in-hand manipulation

When using a tool, the grasps used for picking it up, reposing, and holding it in a suitable pose for the desired task could be distinct. Therefore, a key challenge for autonomous in-hand tool manipulation is finding a sequence of grasps that facilitates every step of the tool use process while continuously maintaining force closure and stability. Due to the complexity of modeling the contact dynamics, reinforcement learning (RL) techniques can provide a solution in this continuous space subject to highly parameterized physical models. However, these techniques impose a trade-off in adaptability and data efficiency. At test time the tool properties, desired trajectory, and desired application forces could differ substantially from training scenarios. Adapting to this necessitates more data or computationally expensive online policy updates. In this work, we apply the principles of discrete dynamic programming (DP) to augment RL performance with domain knowledge. Specifically, we first design a computationally simple approximation of our environment. We then demonstrate in physical simulation that performing tree searches (i.e., lookaheads) and policy rollouts with this approximation can improve an RL-derived grasp sequence policy with minimal additional online computation. Additionally, we show that pretraining a deep RL network with the DP-derived solution to the discretized problem can speed up policy training.Comment: 7 pages (6+1 bibliography), 4 figures, 1 table, 2 algorithms, to appear in ICRA 202

A Continuous Grasp Representation for the Imitation Learning of Grasps on Humanoid Robots

Models and methods are presented which enable a humanoid robot to learn reusable, adaptive grasping skills. Mechanisms and principles in human grasp behavior are studied. The findings are used to develop a grasp representation capable of retaining specific motion characteristics and of adapting to different objects and tasks. Based on the representation a framework is proposed which enables the robot to observe human grasping, learn grasp representations, and infer executable grasping actions

Proceedings of the NASA Conference on Space Telerobotics, volume 2

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Human Machine Interfaces for Teleoperators and Virtual Environments

In Mar. 1990, a meeting organized around the general theme of teleoperation research into virtual environment display technology was conducted. This is a collection of conference-related fragments that will give a glimpse of the potential of the following fields and how they interplay: sensorimotor performance; human-machine interfaces; teleoperation; virtual environments; performance measurement and evaluation methods; and design principles and predictive models

Objekt-Manipulation und Steuerung der Greifkraft durch Verwendung von Taktilen Sensoren

This dissertation describes a new type of tactile sensor and an improved version of the dynamic tactile sensing approach that can provide a regularly updated and accurate estimate of minimum applied forces for use in the control of gripper manipulation. The pre-slip sensing algorithm is proposed and implemented into two-finger robot gripper. An algorithm that can discriminate between types of contact surface and recognize objects at the contact stage is also proposed. A technique for recognizing objects using tactile sensor arrays, and a method based on the quadric surface parameter for classifying grasped objects is described. Tactile arrays can recognize surface types on contact, making it possible for a tactile system to recognize translation, rotation, and scaling of an object independently.Diese Dissertation beschreibt eine neue Art von taktilen Sensoren und einen verbesserten Ansatz zur dynamischen Erfassung von taktilen daten, der in regelmäßigen Zeitabständen eine genaue Bewertung der minimalen Greifkraft liefert, die zur Steuerung des Greifers nötig ist. Ein Berechnungsverfahren zur Voraussage des Schlupfs, das in einen Zwei-Finger-Greifarm eines Roboters eingebaut wurde, wird vorgestellt. Auch ein Algorithmus zur Unterscheidung von verschiedenen Oberflächenarten und zur Erkennung von Objektformen bei der Berührung wird vorgestellt. Ein Verfahren zur Objekterkennung mit Hilfe einer Matrix aus taktilen Sensoren und eine Methode zur Klassifikation ergriffener Objekte, basierend auf den Daten einer rechteckigen Oberfläche, werden beschrieben. Mit Hilfe dieser Matrix können unter schiedliche Arten von Oberflächen bei Berührung erkannt werden, was es für das Tastsystem möglich macht, Verschiebung, Drehung und Größe eines Objektes unabhängig voneinander zu erkennen

Proceedings of the NASA Conference on Space Telerobotics, volume 3

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Intelligent gripper design and application for automated part recognition and gripping

Intelligent gripping may be achieved through gripper design, automated part recognition, intelligent algorithm for control of the gripper, and on-line decision-making based on sensory data. A generic framework which integrates sensory data, part recognition, decision-making and gripper control to achieve intelligent gripping based on ABB industrial robot is constructed. The three-fingered gripper actuated by a linear servo actuator designed and developed in this project for precise speed and position control is capable of handling a large variety of objects. Generic algorithms for intelligent part recognition are developed. Edge vector representation is discussed. Object geometric features are extracted. Fuzzy logic is successfully utilized to enhance the intelligence of the system. The generic fuzzy logic algorithm, which may also find application in other fields, is presented. Model-based gripping planning algorithm which is capable of extracting object grasp features from its geometric features and reasoning out grasp model for objects with different geometry is proposed. Manipulator trajectory planning solves the problem of generating robot programs automatically. Object-oriented programming technique based on Visual C++ MFC is used to constitute the system software so as to ensure the compatibility, expandability and modular programming design. Hierarchical architecture for intelligent gripping is discussed, which partitions the robot’s functionalities into high-level (modeling, recognizing, planning and perception) layers, and low-level (sensing, interfacing and execute) layers. Individual system modules are integrated seamlessly to constitute the intelligent gripping system

Proceedings of the NASA Conference on Space Telerobotics, volume 5

Papers presented at the NASA Conference on Space Telerobotics are compiled. The theme of the conference was man-machine collaboration in space. The conference provided a forum for researchers and engineers to exchange ideas on the research and development required for the application of telerobotics technology to the space systems planned for the 1990's and beyond. Volume 5 contains papers related to the following subject areas: robot arm modeling and control, special topics in telerobotics, telerobotic space operations, manipulator control, flight experiment concepts, manipulator coordination, issues in artificial intelligence systems, and research activities at the Johnson Space Center