Optimality conditions for nonconvex multistate control problems in the coefficients

The purpose of this paper is to attain some optimality conditions for the identification of a diffusion matrix (material) under several restrictions. Assuming that the set of such diffusion matrices is closed for the H-convergence, we give a method to obtain admissible directions which applies to a not-necessarily convex control set. Our results permit obtaining the diffusion matrix from the state functions.Dirección General de Investigación (Ministerio de Ciencia y Tecnología)Junta de Andalucí

Optimality Conditions for Semilinear Parabolic Equations with Controls in Leading Term

An optimal control problem for semilinear parabolic partial differential equations is considered. The control variable appears in the leading term of the equation. Necessary conditions for optimal controls are established by the method of homogenizing spike variation. Results for problems with state constraints are also stated.Comment: 22 apges, 1 figure

Fair Resource Allocation in Macroscopic Evacuation Planning Using Mathematical Programming: Modeling and Optimization

Evacuation is essential in the case of natural and manmade disasters such as hurricanes, nuclear disasters, fire accidents, and terrorism epidemics. Random evacuation plans can increase risks and incur more losses. Hence, numerous simulation and mathematical programming models have been developed over the past few decades to help transportation planners make decisions to reduce costs and protect lives. However, the dynamic transportation process is inherently complex. Thus, modeling this process can be challenging and computationally demanding. The objective of this dissertation is to build a balanced model that reflects the realism of the dynamic transportation process and still be computationally tractable to be implemented in reality by the decision-makers. On the other hand, the users of the transportation network require reasonable travel time within the network to reach their destinations. This dissertation introduces a novel framework in the fields of fairness in network optimization and evacuation to provide better insight into the evacuation process and assist with decision making. The user of the transportation network is a critical element in this research. Thus, fairness and efficiency are the two primary objectives addressed in the work by considering the limited capacity of roads of the transportation network. Specifically, an approximation approach to the max-min fairness (MMF) problem is presented that provides lower computational time and high-quality output compared to the original algorithm. In addition, a new algorithm is developed to find the MMF resource allocation output in nonconvex structure problems. MMF is the fairness policy used in this research since it considers fairness and efficiency and gives priority to fairness. In addition, a new dynamic evacuation modeling approach is introduced that is capable of reporting more information about the evacuees compared to the conventional evacuation models such as their travel time, evacuation time, and departure time. Thus, the contribution of this dissertation is in the two areas of fairness and evacuation. The first part of the contribution of this dissertation is in the field of fairness. The objective in MMF is to allocate resources fairly among multiple demands given limited resources while utilizing the resources for higher efficiency. Fairness and efficiency are contradicting objectives, so they are translated into a bi-objective mathematical programming model and solved using the ϵ-constraint method, introduced by Vira and Haimes (1983). Although the solution is an approximation to the MMF, the model produces quality solutions, when ϵ is properly selected, in less computational time compared to the progressive-filling algorithm (PFA). In addition, a new algorithm is developed in this research called the θ progressive-filling algorithm that finds the MMF in resource allocation for general problems and works on problems with the nonconvex structure problems. The second part of the contribution is in evacuation modeling. The common dynamic evacuation models lack a piece of essential information for achieving fairness, which is the time each evacuee or group of evacuees spend in the network. Most evacuation models compute the total time for all evacuees to move from the endangered zone to the safe destination. Lack of information about the users of the transportation network is the motivation to develop a new optimization model that reports more information about the users of the network. The model finds the travel time, evacuation time, departure time, and the route selected for each group of evacuees. Given that the travel time function is a non-linear convex function of the traffic volume, the function is linearized through a piecewise linear approximation. The developed model is a mixed-integer linear programming (MILP) model with high complexity. Hence, the model is not capable of solving large scale problems. The complexity of the model was reduced by introducing a linear programming (LP) version of the full model. The complexity is significantly reduced while maintaining the exact output. In addition, the new θ-progressive-filling algorithm was implemented on the evacuation model to find a fair and efficient evacuation plan. The algorithm is also used to identify the optimal routes in the transportation network. Moreover, the robustness of the evacuation model was tested against demand uncertainty to observe the model behavior when the demand is uncertain. Finally, the robustness of the model is tested when the traffic flow is uncontrolled. In this case, the model's only decision is to distribute the evacuees on routes and has no control over the departure time

Optimization of systems reliability by metaheuristic approach

The application of metaheuristic approaches in addressing the reliability of systems through optimization is of greater interest to researchers and designers in recent years. Reliability optimization has become an essential part of the design and operation of largescale manufacturing systems. This thesis addresses the optimization of system-reliability for series–parallel systems to solve redundant, continuous, and combinatorial optimization problems in reliability engineering by using metaheuristic approaches (MAs). The problem is to select the best redundancy strategy, component, and redundancy level for each subsystem to maximize the system reliability under system-level constraints. This type of problem involves the selection of components with multiple choices and redundancy levels that yield the maximum benefits, and it is subject to the cost and weight constraints at the system level. These are very common and realistic problems faced in the conceptual design of numerous engineering systems. The development of efficient solutions to these problems is becoming progressively important because mechanical systems are becoming increasingly complex, while development plans are decreasing in size and reliability requirements are rapidly changing and becoming increasingly difficult to adhere to. An optimal design solution can be obtained very frequently and more quickly by using genetic algorithm redundancy allocation problems (GARAPs). In general, redundancy allocation problems (RAPs) are difficult to solve for real cases, especially in large-scale situations. In this study, the reliability optimization of a series–parallel by using a genetic algorithm (GA) and statistical analysis is considered. The approach discussed herein can be applied to address the challenges in system reliability that includes redundant numbers of carefully chosen modules, overall cost, and overall weight. Most related studies have focused only on the single-objective optimization of RAP. Multiobjective optimization has not yet attracted much attention. This research project examines the multiobjective situation by focusing on multiobjective formulation, which is useful in maximizing system reliability while simultaneously minimizing system cost and weight to solve the RAP. The present study applies a methodology for optimizing the reliability of a series–parallel system based on multiobjective optimization and multistate reliability by using a hybrid GA and a fuzzy function. The study aims to determine the strategy for selecting the degree of redundancy for every subsystem to exploit the general system reliability depending on the overall cost and weight limitations. In addition, the outcomes of the case study for optimizing the reliability of the series–parallel system are presented, and the relationships with previously investigated phenomena are presented to determine the performance of the GA under review. Furthermore, this study established a new metaheuristic-based technique for resolving multiobjective optimization challenges, such as the common reliability redundancy allocation problem. Additionally, a new simulation process was developed to generate practical tools for designing reliable series–parallel systems. Hence, metaheuristic methods were applied for solving such difficult and complex problems. In addition, metaheuristics provide a useful compromise between the amount of computation time required and the quality of the approximated solution space. The industrial challenges include the maximization of system reliability subject to limited system cost and weight, minimization of system weight subject to limited system cost and the system reliability requirements and increasing of quality components through optimization and system reliability. Furthermore, a real-life situation research on security control of a gas turbine in the overspeed state was explored in this study with the aim of verifying the proposed algorithm from the context of system optimization

Expanding the Horizons of Manufacturing: Towards Wide Integration, Smart Systems and Tools

This research topic aims at enterprise-wide modeling and optimization (EWMO) through the development and application of integrated modeling, simulation and optimization methodologies, and computer-aided tools for reliable and sustainable improvement opportunities within the entire manufacturing network (raw materials, production plants, distribution, retailers, and customers) and its components. This integrated approach incorporates information from the local primary control and supervisory modules into the scheduling/planning formulation. That makes it possible to dynamically react to incidents that occur in the network components at the appropriate decision-making level, requiring fewer resources, emitting less waste, and allowing for better responsiveness in changing market requirements and operational variations, reducing cost, waste, energy consumption and environmental impact, and increasing the benefits. More recently, the exploitation of new technology integration, such as through semantic models in formal knowledge models, allows for the capture and utilization of domain knowledge, human knowledge, and expert knowledge toward comprehensive intelligent management. Otherwise, the development of advanced technologies and tools, such as cyber-physical systems, the Internet of Things, the Industrial Internet of Things, Artificial Intelligence, Big Data, Cloud Computing, Blockchain, etc., have captured the attention of manufacturing enterprises toward intelligent manufacturing systems