Conceptual designs of multi-degree of freedom compliant parallel manipulators composed of wire-beam based compliant mechanisms

This paper proposes conceptual designs of multi-degree(s) of freedom (DOF) compliant parallel manipulators (CPMs) including 3-DOF translational CPMs and 6-DOF CPMs using a building block based pseudo-rigid-body-model (PRBM) approach. The proposed multi-DOF CPMs are composed of wire-beam based compliant mechanisms (WBBCMs) as distributed-compliance compliant building blocks (CBBs). Firstly, a comprehensive literature review for the design approaches of compliant mechanisms is conducted, and a building block based PRBM is then presented, which replaces the traditional kinematic sub-chain with an appropriate multi-DOF CBB. In order to obtain the decoupled 3-DOF translational CPMs (XYZ CPMs), two classes of kinematically decoupled 3-PPPR (P: prismatic joint, R: revolute joint) translational parallel mechanisms (TPMs) and 3-PPPRR TPMs are identified based on the type synthesis of rigid-body parallel mechanisms, and WBBCMs as the associated CBBs are further designed. Via replacing the traditional actuated P joint and the traditional passive PPR/PPRR sub-chain in each leg of the 3-DOF TPM with the counterpart CBBs (i.e. WBBCMs), a number of decoupled XYZ CPMs are obtained by appropriate arrangements. In order to obtain the decoupled 6-DOF CPMs, an orthogonally-arranged decoupled 6-PSS (S: spherical joint) parallel mechanism is first identified, and then two example 6-DOF CPMs are proposed by the building block based PRBM method. It is shown that, among these designs, two types of monolithic XYZ CPM designs with extended life have been presented

A novel voice coil motor-driven compliant micropositioning stage based on flexure mechanism

This paper presents a 2-degrees of freedom flexure-based micropositioning stage with a flexible decoupling mechanism. The stage is composed of an upper planar stage and four vertical support links to improve the out-of-plane stiffness. The moving platform is driven by two voice coil motors, and thus it has the capability of large working stroke. The upper stage is connected with the base through six double parallel four-bar linkages mechanisms, which are orthogonally arranged to implement the motion decoupling in the x and y directions. The vertical support links with serially connected hook joints are utilized to guarantee good planar motion with heavy-loads. The static stiffness and the dynamic resonant frequencies are obtained based on the theoretical analyses. Finite element analysis is used to investigate the characteristics of the developed stage. Experiments are carried out to validate the established models and the performance of the developed stage. It is noted that the developed stage has the capability of translational motion stroke of 1.8 mm and 1.78 mm in working axes. The maximum coupling errors in the x and y directions are 0.65% and 0.82%, respectively, and the motion resolution is less than 200 nm. The experimental results show that the developed stage has good capability for trajectory tracking

Automated Micromanipulation of Micro Objects

In recent years, research efforts in the development of Micro Electro Mechanical Systems, (MEMS) including microactuators and micromanipulators, have attracted a great deal of attention. The development of microfabrication techniques has resulted in substantial progress in the miniaturization of devices such as electronic circuits. However, the research in MEMS still lags behind in terms of the development of reliable tools for post-fabrication processes and the precise and dexterous manipulation of individual micro size objects. Current micromanipulation mechanisms are prone to high costs, a large footprint, and poor dexterity and are labour intensive. To overcome such, the research in this thesis is focused on the utilization of microactuators in micromanipulation. Microactuators are compliant structures. They undergo substantial deflection during micromanipulation due to the considerable surface micro forces. Their dominance in governing micromanipulation is so compelling that their effects should be considered in designing microactuators and microsensors. In this thesis, the characterization of the surface micro forces and automated micromanipulation are investigated. An inexpensive experimental setup is proposed as a platform to replace Atomic Force Microscopy (AFM) for analyzing the force characterization of micro scale components. The relationship between the magnitudes of the surface micro forces and the parameters such as the velocity of the pushing process, relative humidity, temperature, hydrophilicity of the substrate, and surface area are empirically examined. In addition, a precision automated micromanipulation system is realized. A class of artificial neural networks (NN) is devised to estimate the unmodelled micro forces during the controlled pushing of micro size object along a desired path. Then, a nonlinear controller is developed for the controlled pushing of the micro objects to guarantee the stability of the closed loop system in the Lyapunov sense. To validate the performance of the proposed controller, an experimental setup is designed. The application of the proposed controller is extended to precisely push several micro objects, each with different characteristics in terms of the surface micro forces governing the manipulation process. The proposed adaptive controller is capable of learning to adjust its weights effectively when the surface micro forces change under varying conditions. By using the controller, a fully automated sequential positioning of three micro objects on a flat substrate is performed. The results are compared with those of the identical sequential pushing by using a conventional linear controller. The results suggest that artificial NNs are a promising tool for the design of adaptive controllers to accurately perform the automated manipulation of multiple objects in the microscopic scale for microassembly

Workshop on "Control issues in the micro / nano - world".

International audienceDuring the last decade, the need of systems with micro/nanometers accuracy and fast dynamics has been growing rapidly. Such systems occur in applications including 1) micromanipulation of biological cells, 2) micrassembly of MEMS/MOEMS, 3) micro/nanosensors for environmental monitoring, 4) nanometer resolution imaging and metrology (AFM and SEM). The scale and requirement of such systems present a number of challenges to the control system design that will be addressed in this workshop. Working in the micro/nano-world involves displacements from nanometers to tens of microns. Because of this precision requirement, environmental conditions such as temperature, humidity, vibration, could generate noise and disturbance that are in the same range as the displacements of interest. The so-called smart materials, e.g., piezoceramics, magnetostrictive, shape memory, electroactive polymer, have been used for actuation or sensing in the micro/nano-world. They allow high resolution positioning as compared to hinges based systems. However, these materials exhibit hysteresis nonlinearity, and in the case of piezoelectric materials, drifts (called creep) in response to constant inputs In the case of oscillating micro/nano-structures (cantilever, tube), these nonlinearities and vibrations strongly decrease their performances. Many MEMS and NEMS applications involve gripping, feeding, or sorting, operations, where sensor feedback is necessary for their execution. Sensors that are readily available, e.g., interferometer, triangulation laser, and machine vision, are bulky and expensive. Sensors that are compact in size and convenient for packaging, e.g., strain gage, piezoceramic charge sensor, etc., have limited performance or robustness. To account for these difficulties, new control oriented techniques are emerging, such as[d the combination of two or more ‘packageable' sensors , the use of feedforward control technique which does not require sensors, and the use of robust controllers which account the sensor characteristics. The aim of this workshop is to provide a forum for specialists to present and overview the different approaches of control system design for the micro/nano-world and to initiate collaborations and joint projects

Creative design and modelling of large-range translation compliant parallel manipulators

Compliant parallel mechanisms/manipulators (CPMs) are parallel manipulators that transmit motion/load by deformation of their compliant members. Due to their merits such as the eliminated backlash and friction, no need for lubrication, reduced wear and noise, and monolithic configuration, they have been used in many emerging applications as scanning tables, bio-cell injectors, nano-positioners, and etc. How to design large-range CPMs is still a challenging issue. To meet the needs for large-range translational CPMs for high-precision motion stages, this thesis focuses on the systematic conceptual design and modelling of large-range translational CPMs with distributed-compliance. Firstly, several compliant parallel modules with distributed-compliance, such as spatial multi-beam modules, are identified as building blocks of translational CPMs. A normalized, nonlinear and analytical model is then derived for the spatial multi-beam modules to address the non-linearity of load-equilibrium equations. Secondly, a new design methodology for translational CPMs is presented. The main characteristic of the proposed design approach is not only to replace kinematic joints as in the literature, but also to replace kinematic chains with appropriate multiple degrees-of-freedom (DOF) compliant parallel modules. Thirdly, novel large-range translational CPMs are constructed using the proposed design methodology and identified compliant parallel modules. The proposed novel CPMs include, for example, a 1-DOF compliant parallel gripper with auto-adaptive grasping function, a stiffness-enhanced XY CPM with a spatial compliant leg, and an improved modular XYZ CPM using identical spatial double four-beam modules. Especially, the proposed XY CPM and XYZ CPM can achieve a 10mm’s motion range along each axis in the case studies. Finally, kinematostatic modelling of the proposed translational CPMs is presented to enable rapid performance characteristic analysis. The proposed analytical models are also compared with finite element analysis

Design, Optimization, and Experimental Characterization of a Novel Magnetically Actuated Finger Micromanipulator

The ability of external magnetic fields to precisely control micromanipulator systems has received a great deal of attention from researchers in recent years due to its off-board power source. As these micromanipulators provide frictionless motion, and precise motion control, they have promising potential applications in many fields. Conversely, major drawbacks of electromagnetic micromanipulators, include a limited motion range compared to the micromanipulator volume, the inability to handle heavy payloads, and the need for a large drive unit compared to the size of the levitated object, and finally, a low ratio of the generated magnetic force to the micromanipulator weight. To overcome these limitations, we designed a novel electromagnetic finger micromanipulator that was adapted from the well-known spherical robot. The design and optimization procedures for building a three Degree of Freedoms (DOF) electromagnetic finger micromanipulator are firstly introduced. This finger micromanipulator has many potential applications, such as cell manipulation, and pick and place operations. The system consists of two main subsystems: a magnetic actuator, and an electromagnetic end-effector that is connected to the magnetic actuator by a needle. The magnetic actuator consists of four permanent magnets and four electromagnetic coils that work together to guide the micromanipulator finger in the xz plane. The electromagnetic end-effector consists of a rod shape permanent magnet that is aligned along the y axis and surrounded by an electromagnetic coil. The optimal configuration that maximizes the micromanipulator actuation force, and a closed form solution for micromanipulator magnetic actuation force are presented. The model is verified by measuring the interaction force between an electromagnet and a permanent magnet experimentally, and using Finite Element Methods (FEM) analysis. The results show an agreement between the model, the experiment, and the FEM results. The error difference between the FEM, experimental, and model data was 0.05 N. The micromanipulator can be remotely operated by transferring magnetic energy from outside, which means there is no mechanical contact between the actuator and the micromanipulator. Moreover, three control algorithms are designed in order to compute control input currents that are able to control the position of the end-effector in the x, y, and z axes. The proposed controllers are: PID controller, state-feedback controller, and adaptive controller. The experimental results show that the micromanipulator is able to track the desired trajectory with a steady-state error less than 10 µm for a payload free condition. Finally, the ability of the micromanipulator to pick-and-place unknown payloads is demonstrated. To achieve this objective, a robust model reference adaptive controller (MRAC) using the MIT rule for an adaptive mechanism to guide the micromanipulator in the workspace is implemented. The performance of the MRAC is compared with a standard PID controller and state-feedback controller. For the payload free condition, the experimental results show the ability of the micromanipulator to follow a desired motion trajectory in all control strategies with a root mean square error less than 0.2 mm. However, while there is payload variation, the PID controller response yields a non smooth motion with a large overshoot and undershoot. Similarly, the state-feedback controller suffers from variability of dynamics and disturbances due to the payload variation, which yields to non-smooth motion and large overshoot. The micromanipulator motion under the MRAC control scheme conversely follows the desired motion trajectory with the same accuracy. It is found that the micromanipulator can handle payloads up to 75 grams and it has a motion range of ∓ 15 mm in all axes

Synthesizing Parallel Flexures That Mimic the Kinematics of Serial Flexures Using Freedom and Constraint Topologies

The principles of the freedom and constraint topologies (FACT) synthesis approach are adapted and applied to the design of parallel flexure systems that mimic degrees of freedom (DOFs) primarily achievable by serial flexure systems. FACT provides designers with a comprehensive library of geometric shapes. These shapes enable designers to visualize the regions wherein compliant flexure elements may be placed for achieving desired DOFs. By displacing these shapes far from the point of interest of the stage of a flexure system, designers can compare a multiplicity of concepts that utilizes the advantages of both parallel and serial systems. A complete list of which FACT shapes mimic which DOFs when displaced far from the point of interest of the flexure system's stage is provided as well as an intuitive approach for verifying the completeness of this list. The proposed work intends to cater to the design of precision motion stages, optical mounts, microscopy stages, and general purpose flexure bearings. Two case studies are provided to demonstrate the application of the developed procedure