From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

Studies on automatic parallelization for heterogeneous and homogeneous multicore processors

制度:新 ; 報告番号:甲3537号 ; 学位の種類:博士(工学) ; 授与年月日:2012/2/25 ; 早大学位記番号:新587

Design of High-Speed CMOS Interface Circuits for Optical Communications

학위논문 (박사)-- 서울대학교 대학원 공과대학 전기·컴퓨터공학부, 2017. 8. 정덕균.The bandwidth requirement of wireline communications has increased ex-ponentially because of the ever-increasing demand for data centers and high-performance computing systems. However, it becomes difficult to satisfy the requirement with legacy electrical links which suffer from frequency-dependent losses due to skin effect, dielectric loss, channel reflections, and crosstalk, resulting in a severe bandwidth limitation. In order to overcome this challenge, it is necessary to introduce optical communication technology, which has been mainly used for long-reach communications, such as long-haul net-works and metropolitan area networks, to the medium- and short-reach com-munication systems. However, there still remain important issues to be resolved to facilitate the adoption of the optical technologies. The most critical challeng-es are the energy efficiency and the cost competitiveness as compared to the legacy copper-based electrical communications. One possible solution is silicon photonics that has long been investigated by a number of research groups. De-spite inherent incompatibility of silicon with the photonic world, silicon pho-tonics is promising and is the only solution that can leverage the mature CMOS technologies. In this thesis, we summarize the current status of silicon photonics and pro-vide the prospect of the optical interconnection. We also present key circuit techniques essential to the implementation of high-speed and low-power optical receivers. And then, we propose optical receiver architectures satisfying the aforementioned requirements with novel circuit techniques.CHAPTER 1 INTRODUCTION 1 1.1 MOTIVATION 1 1.2 THESIS ORGANIZATION 6 CHAPTER 2 BACKGROUND OF OPTICAL COMMUNICATION 7 2.1 OVERVIEW OF OPTICAL LINK 7 2.2 SILICON PHOTONICS 11 2.3 HYBRID INTEGRATION 22 2.4 SILICON-BASED PHOTODIODES 28 2.4.1 BASIC TERMINOLOGY 28 2.4.2 SILICON PD 29 2.4.3 GERMANIUM PD 32 2.4.4 INTEGRATION WITH WAVEGUIDE 33 CHAPTER 3 CIRCUIT TECHNIQUES FOR OPTICAL RECEIVER 35 3.1 BASIS OF TRANSIMPEDANCE AMPLIFIER 35 3.2 TOPOLOGY OF TIA 39 3.2.1 RESISTOR-BASED TIA 39 3.2.2 COMMON-GATE-BASED TIA 41 3.2.3 FEEDBACK-BASED TIA 44 3.2.4 INVERTER-BASED TIA 47 3.2.5 INTEGRATING RECEIVER 48 3.3 BANDWIDTH EXTENSION TECHNIQUES 49 3.3.1 INDUCTOR-BASED TECHNIQUE 49 3.3.2 EQUALIZATION 61 3.4 CLOCK AND DATA RECOVERY CIRCUITS 66 3.4.1 CDR BASIC 66 3.4.2 CDR EXAMPLES 68 CHAPTER 4 LOW-POWER OPTICAL RECEIVER FRONT-END 73 4.1 OVERVIEW 73 4.2 INVERTER-BASED TIA WITH RESISTIVE FEEDBACK 74 4.3 INVERTER-BASED TIA WITH RESISTIVE AND INDUCTIVE FEEDBACK 81 4.4 CIRCUIT IMPLEMENTATION 89 4.5 MEASUREMENT RESULTS 93 CHAPTER 5 BANDWIDTH- AND POWER-SCALABLE OPTICAL RECEIVER FRONT-END 96 5.1 OVERVIEW 96 5.2 BANDWIDTH AND POWER SCALABILITY 97 5.3 GM STABILIZATION 98 5.4 OVERALL BLOCK DIAGRAM OF RECEIVER 104 5.5 MEASUREMENT RESULTS 111 CHAPTER 6 CONCLUSION 118 BIBLIOGRAPHY 120 초 록 131Docto

Modeling and analysis of semiconductor manufacturing processes using petri nets

This thesis addresses the issues in modeling and analysis of multichip module (MCM) manufacturing processes using Petri nets. Building such graphical and mathematical models is a crucial step to understand MCM technologies and to enhance their application scope. In this thesis, the application of Petri nets is presented with top-down and bottom-up approaches. The theory of Petri nets is summarized with its basic notations and properties at first. After that, the capability of calculating and analyzing Petri nets with deterministic timing information is extended to meet the requirements of the MCM models. Then, using top-down refining and system decomposition, MCM models are built from an abstract point to concrete systems with timing information. In this process, reduction theory based on a multiple-input-single-output modules for deterministic Petri nets is applied to analyze the cycle time of Petri net models. Besides, this thesis is of significance in its use of the reduction theory which is derived for timed marked graphs - an important class of Petri nets

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Platform-based design, test and fast verification flow for mixed-signal systems on chip

This research is providing methodologies to enhance the design phase from architectural space exploration and system study to verification of the whole mixed-signal system. At the beginning of the work, some innovative digital IPs have been designed to develop efficient signal conditioning for sensor systems on-chip that has been included in commercial products. After this phase, the main focus has been addressed to the creation of a re-usable and versatile test of the device after the tape-out which is close to become one of the major cost factor for ICs companies, strongly linking it to model’s test-benches to avoid re-design phases and multi-environment scenarios, producing a very effective approach to a single, fast and reliable multi-level verification environment. All these works generated different publications in scientific literature. The compound scenario concerning the development of sensor systems is presented in Chapter 1, together with an overview of the related market with a particular focus on the latest MEMS and MOEMS technology devices, and their applications in various segments. Chapter 2 introduces the state of the art for sensor interfaces: the generic sensor interface concept (based on sharing the same electronics among similar applications achieving cost saving at the expense of area and performance loss) versus the Platform Based Design methodology, which overcomes the drawbacks of the classic solution by keeping the generality at the highest design layers and customizing the platform for a target sensor achieving optimized performances. An evolution of Platform Based Design achieved by implementation into silicon of the ISIF (Intelligent Sensor InterFace) platform is therefore presented. ISIF is a highly configurable mixed-signal chip which allows designers to perform an effective design space exploration and to evaluate directly on silicon the system performances avoiding the critical and time consuming analysis required by standard platform based approach. In chapter 3 we describe the design of a smart sensor interface for conditioning next generation MOEMS. The adoption of a new, high performance and high integrated technology allow us to integrate not only a versatile platform but also a powerful ARM processor and various IPs providing the possibility to use the platform not only as a conditioning platform but also as a processing unit for the application. In this chapter a description of the various blocks is given, with a particular emphasis on the IP developed in order to grant the highest grade of flexibility with the minimum area occupation. The architectural space evaluation and the application prototyping with ISIF has enabled an effective, rapid and low risk development of a new high performance platform achieving a flexible sensor system for MEMS and MOEMS monitoring and conditioning. The platform has been design to cover very challenging test-benches, like a laser-based projector device. In this way the platform will not only be able to effectively handle the sensor but also all the system that can be built around it, reducing the needed for further electronics and resulting in an efficient test bench for the algorithm developed to drive the system. The high costs in ASIC development are mainly related to re-design phases because of missing complete top-level tests. Analog and digital parts design flows are separately verified. Starting from these considerations, in the last chapter a complete test environment for complex mixed-signal chips is presented. A semi-automatic VHDL-AMS flow to provide totally matching top-level is described and then, an evolution for fast self-checking test development for both model and real chip verification is proposed. By the introduction of a Python interface, the designer can easily perform interactive tests to cover all the features verification (e.g. calibration and trimming) into the design phase and check them all with the same environment on the real chip after the tape-out. This strategy has been tested on a consumer 3D-gyro for consumer application, in collaboration with SensorDynamics AG

Methodology and Ecosystem for the Design of a Complex Network ASIC

Performance of HPC systems has risen steadily. While the 10 Petaflop/s barrier has been breached in the year 2011 the next large step into the exascale era is expected sometime between the years 2018 and 2020. The EXTOLL project will be an integral part in this venture. Originally designed as a research project on FPGA basis it will make the transition to an ASIC to improve its already excelling performance even further. This transition poses many challenges that will be presented in this thesis. Nowadays, it is not enough to look only at single components in a system. EXTOLL is part of complex ecosystem which must be optimized overall since everything is tightly interwoven and disregarding some aspects can cause the whole system either to work with limited performance or even to fail. This thesis examines four different aspects in the design hierarchy and proposes efficient solutions or improvements for each of them. At first it takes a look at the design implementation and the differences between FPGA and ASIC design. It introduces a methodology to equip all on-chip memory with ECC logic automatically without the user’s input and in a transparent way so that the underlying code that uses the memory does not have to be changed. In the next step the floorplanning process is analyzed and an iterative solution is worked out based on physical and logical constraints of the EXTOLL design. Besides, a work flow for collaborative design is presented that allows multiple users to work on the design concurrently. The third part concentrates on the high-speed signal path from the chip to the connector and how it is affected by technological limitations. All constraints are analyzed and a package layout for the EXTOLL chip is proposed that is seen as the optimal solution. The last part develops a cost model for wafer and package level test and raises technological concerns that will affect the testing methodology. In order to run testing internally it proposes the development of a stand-alone test platform that is able to test packaged EXTOLL chips in every aspect