On Fault Tolerance Methods for Networks-on-Chip

Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit. This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels. The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model. The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated. At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast

Tree-structured small-world connected wireless network-on-chip with adaptive routing

Traditional Network-on-Chip (NoC) systems comprised of many cores suffer from debilitating bottlenecks of latency and significant power dissipation due to the overhead inherent in multi-hop communication. In addition, these systems remain vulnerable to malicious circuitry incorporated into the design by untrustworthy vendors in a world where complex multi-stage design and manufacturing processes require the collective specialized services of a variety of contractors. This thesis proposes a novel small-world tree-based network-on-chip (SWTNoC) structure designed for high throughput, acceptable energy consumption, and resiliency to attacks and node failures resulting from the insertion of hardware Trojans. This tree-based implementation was devised as a means of reducing average network hop count, providing a large degree of local connectivity, and effective long-range connectivity by means of a novel wireless link approach based on carbon nanotube (CNT) antenna design. Network resiliency is achieved by means of a devised adaptive routing algorithm implemented to work with TRAIN (Tree-based Routing Architecture for Irregular Networks). Comparisons are drawn with benchmark architectures with optimized wireless link placement by means of the simulated annealing (SA) metaheuristic. Experimental results demonstrate a 21% throughput improvement and a 23% reduction in dissipated energy per packet over the closest competing architecture. Similar trends are observed at increasing system sizes. In addition, the SWTNoC maintains this throughput and energy advantage in the presence of a fault introduced into the system. By designing a hierarchical topology and designating a higher level of importance on a subset of the nodes, much higher network throughput can be attained while simultaneously guaranteeing deadlock freedom as well as a high degree of resiliency and fault-tolerance

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Book Review

A Scholarly Review of “Error Control for Network-On-Chip Links” (Authors: Bo Fu and Paul Ampadu, 2012)Fu, B.; and Ampadu, P. 2012. Error Control for Network-On-Chip Links.Springer Science+Business Media, LLC, New York, NY, USA.Available: <http://dx.doi.org/10.1007/978-1-4419-9313-7>

Security of Electrical, Optical and Wireless On-Chip Interconnects: A Survey

The advancement of manufacturing technologies has enabled the integration of more intellectual property (IP) cores on the same system-on-chip (SoC). Scalable and high throughput on-chip communication architecture has become a vital component in today's SoCs. Diverse technologies such as electrical, wireless, optical, and hybrid are available for on-chip communication with different architectures supporting them. Security of the on-chip communication is crucial because exploiting any vulnerability would be a goldmine for an attacker. In this survey, we provide a comprehensive review of threat models, attacks, and countermeasures over diverse on-chip communication technologies as well as sophisticated architectures.Comment: 41 pages, 24 figures, 4 table

Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems

With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance. Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems. Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks

Introduction de mécanismes de tolérance aux pannes franches dans les architectures de processeur « many-core » à mémoire partagée cohérente

The always increasing performance demands of applications such as cryptography, scientific simulation, network packets dispatching, signal processing or even general-purpose computing has made of many-core architectures a necessary trend in the processor design. These architectures can have hundreds or thousands of processor cores, so as to provide important computational throughputs with a reasonable power consumption. However, their important transistor density makes many-core architectures more prone to hardware failures. There is an augmentation in the fabrication process variability, and in the stress factors of transistors, which impacts both the manufacturing yield and lifetime. A potential solution to this problem is the introduction of fault-tolerance mechanisms allowing the processor to function in a degraded mode despite the presence of defective internal components. We propose a complete in-the-field reconfiguration-based permanent failure recovery mechanism for shared-memory many-core processors. This mechanism is based on a firmware (stored in distributed on-chip read-only memories) executed at each hardware reset by the internal processor cores without any external intervention. It consists in distributed software procedures, which locate the faulty components (cores, memory banks, and network-on-chip routers), reconfigure the hardware architecture, and provide a description of the functional hardware infrastructure to the operating system. Our proposal is evaluated using a cycle-accurate SystemC virtual prototype of an existing many-core architecture. We evaluate both its latency, and its silicon cost.L'augmentation continue de la puissance de calcul requise par les applications telles que la cryptographie, la simulation, ou le traitement du signal a fait évoluer la structure interne des processeurs vers des architectures massivement parallèles (dites « many-core »). Ces architectures peuvent contenir des centaines, voire des milliers de cœurs afin de fournir une puissance de calcul importante avec une consommation énergétique raisonnable. Néanmoins, l'importante densité de transistors fait que ces architectures sont très susceptibles aux pannes matérielles. L'augmentation dans la variabilité du processus de fabrication, et dans les facteurs de stress des transistors, dégrade à la fois le rendement de fabrication, et leur durée de vie. Nous proposons donc un mécanisme complet de tolérance aux pannes franches, permettant les architectures « many-core » à mémoire partagée cohérente de fonctionner dans un mode dégradé. Ce mécanisme s'appuie sur un logiciel embarqué et distribué dans des mémoires sur puce (« firmware »), qui est exécuté par les cœurs à chaque démarrage du processeur. Ce logiciel implémente plusieurs algorithmes distribués permettant de localiser les composants défaillants (cœurs, bancs mémoires, et routeurs des réseaux sur puce), de reconfigurer l'architecture matérielle, et de fournir une cartographie de l'infrastructure matérielle fonctionnelle au système d'exploitation. Le mécanisme supporte aussi bien des défauts de fabrication, que des pannes de vieillissement après que la puce est en service dans l'équipement. Notre proposition est évaluée en utilisant un prototype virtuel précis au cycle d'une architecture « many-core » existante

Reconfigurable High Performance Secured NoC Design Using Hierarchical Agent-based Monitoring System

With the rapid increase in demand for high performance computing, there is also a significant growth of data communication that leads to leverage the significance of network on chip. This paper proposes a reconfigurable fault tolerant on chip architecture with hierarchical agent based monitoring system for enhancing the performance of network based multiprocessor system on chip against faulty links and nodes. These distributed agents provide healthy status and congestion information of the network. This status information is used for further packet routing in the network with the help of XY routing algorithm. The functionality of Agent is enhanced not only to work as information provider but also to take decision for packet to either pass or stop to the processing element by setting the firewall in order to provide security. Proposed design provides a better performance and area optimization by avoiding deadlock and live lock as compared to existing approaches over network design