ESTIMATION OF MAXIMUM ACHIEVABLE END-TO-END THROUGHPUT IN IEEE 802.11 BASED WIRELESS MESH NETWORKS

Wireless mesh networks can be quickly deployed in various situations to provide temporary to permanent wireless network coverage. To assess the feasibility and reliability of a given end-to-end communication need, it is essential for communication end points to accurately estimate their achievable end-to-end throughput. Several capacity, end-to-end throughput, and available bandwidth estimation techniques have been studied in the past for wired and wireless networks. The contention among wireless nodes arising due to the IEEE 802.11 medium access control protocol\u27s channel access mechanism renders the estimation of such network attributes challenging in multi-hop networks. This thesis evaluates Adhoc Probe, one state-of-the-art capacity estimation approach for ad hoc wireless networks and shows that it in fact measures achievable throughput instead of capacity and its estimated achievable throughput is not realizable. An analysis of end-to-end delays of the injected probe packets is presented to show the effects of medium access contention and network queuing on the delays and estimated achievable throughput subject to different network traffic patterns and multi-hop collisions. Based on the observations, an alternative less intrusive delay distribution based achievable throughput estimation solution is proposed. With ns-2 simulations, the scheme was shown to accurately estimate the achievable throughput under various topologies and cross traffic conditions

Feasibility of Using Passive Monitoring Techniques in Mesh Networks for the Support of Routing

In recent years, Wireless Mesh Networks (WMNs) have emerged as a promising solution to provide low cost access networks that extend Internet access and other networking services. Mesh routers form the backbone connectivity through cooperative routing in an often unstable wireless medium. Therefore, the techniques used to monitor and manage the performance of the wireless network are expected to play a significant role in providing the necessary performance metrics to help optimize the link performance in WMNs. This thesis initially presents an assessment of the correlation between passive monitoring and active probing techniques used for link performance measurement in single radio WMNs. The study reveals that by combining multiple performance metrics obtained by using passive monitoring, a high correlation with active probing can be achieved. The thesis then addresses the problem of the system performance degradation associated with simultaneous activation of multiple radios within a mesh node in a multi-radio environment. The experiments results suggest that the finite computing resource seems to be the limiting factor in the performance of a multi-radio mesh network. Having studied this characteristic of multi-radio networks, a similar approach as used in single radio mesh network analysis was taken to investigate the feasibility of passive monitoring in a multi-radio environment. The accuracy of the passive monitoring technique was compared with that of the active probing technique and the conclusion reached is that passive monitoring is a viable alternative to active probing technique in multi-radio mesh networks

Protocol design and optimization for QoS provisioning in wireless mesh networks

Wireless Mesh Network (WMN) has been recognized as a promising step towards the goal of ubiquitous broadband wireless Internet access. By exploiting the state-of-the-art radio and multi-hop networking technologies, mesh nodes in WMN collaboratively form a stationary wireless communication backbone. Data between clients and the Internet is routed through a series of mesh nodes via one or multiple paths. Such a mesh structure enables WMN to provide clients high-speed Internet access services with a less expensive and easier-to-deployment wireless infrastructure comparing to the wired counterparts. Due to the unique characteristics of WMN, existing protocols and schemes designed for other wellstudied wireless networks, such as Wi-Fi and Mobile Ad-hoc Network (MANET), are not suitable for WMN and hence cannot be applied to WMN directly. Therefore, novel protocols specifically designed and optimized forWMNare highly desired to fully exploit the mesh architecture. The goal is to provide high-level Quality-of-Service (QoS) to WMN clients to enable a rich portfolio of wireless and mobile applications and scenarios. This dissertation investigates the following important issues related to QoS provisioning in WMN: high throughput routing between WMN clients and the Internet, fairness provisioning among WMN clients and network-level capacity optimization. We propose innovative solutions to address these issues and improve the performance, scalability and reliability of WMN. In addition, we develop CyMesh, a multi-radio multi-channel (MRMC) wireless mesh network testbed, to evaluate the capacity and performance of WMN in real world environments. Extensive simulation (using the QualNet simulator) and experimental (over the CyMesh testbed) results demonstrate the effectiveness of the designed protocols. In particular, we learn that the system capacity of WMN can be improved significantly by exploiting the MRMC network architecture and the antenna directionality of radios equipped on mesh nodes, and our proposed fulfillment based fairness is a reasonable notion for fair service provisioning among WMN clients. Moreover, we report the encountered problems, key observations and learned lessons during the design and deployment of CyMesh, which may serve as a valuable resource for future MRMC WMN implementations

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

Medium Access Control for Opportunistic Concurrent Transmissions under Shadowing Channels

We study the problem of how to alleviate the exposed terminal effect in multi-hop wireless networks in the presence of log-normal shadowing channels. Assuming node location information, we propose an extension of the IEEE 802.11 MAC protocol that sched-ules concurrent transmissions in the presence of log-normal shadowing, thus mitigating the exposed terminal problem and improving network throughput and delay performance. We observe considerable improvements in throughput and delay achieved over the IEEE 802.11 MAC under various network topologies and channel conditions in ns-2 simulations, which justify the importance of considering channel randomness in MAC protocol design for multi-hop wireless networks

Survey on wireless technology trade-offs for the industrial internet of things

Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment