157,902 research outputs found
Machine Learning for Indoor Localization Using Mobile Phone-Based Sensors
In this paper we investigate the problem of localizing a mobile device based
on readings from its embedded sensors utilizing machine learning methodologies.
We consider a real-world environment, collect a large dataset of 3110
datapoints, and examine the performance of a substantial number of machine
learning algorithms in localizing a mobile device. We have found algorithms
that give a mean error as accurate as 0.76 meters, outperforming other indoor
localization systems reported in the literature. We also propose a hybrid
instance-based approach that results in a speed increase by a factor of ten
with no loss of accuracy in a live deployment over standard instance-based
methods, allowing for fast and accurate localization. Further, we determine how
smaller datasets collected with less density affect accuracy of localization,
important for use in real-world environments. Finally, we demonstrate that
these approaches are appropriate for real-world deployment by evaluating their
performance in an online, in-motion experiment.Comment: 6 pages, 4 figure
An Algebraic Framework for the Real-Time Solution of Inverse Problems on Embedded Systems
This article presents a new approach to the real-time solution of inverse
problems on embedded systems. The class of problems addressed corresponds to
ordinary differential equations (ODEs) with generalized linear constraints,
whereby the data from an array of sensors forms the forcing function. The
solution of the equation is formulated as a least squares (LS) problem with
linear constraints. The LS approach makes the method suitable for the explicit
solution of inverse problems where the forcing function is perturbed by noise.
The algebraic computation is partitioned into a initial preparatory step, which
precomputes the matrices required for the run-time computation; and the cyclic
run-time computation, which is repeated with each acquisition of sensor data.
The cyclic computation consists of a single matrix-vector multiplication, in
this manner computation complexity is known a-priori, fulfilling the definition
of a real-time computation. Numerical testing of the new method is presented on
perturbed as well as unperturbed problems; the results are compared with known
analytic solutions and solutions acquired from state-of-the-art implicit
solvers. The solution is implemented with model based design and uses only
fundamental linear algebra; consequently, this approach supports automatic code
generation for deployment on embedded systems. The targeting concept was tested
via software- and processor-in-the-loop verification on two systems with
different processor architectures. Finally, the method was tested on a
laboratory prototype with real measurement data for the monitoring of flexible
structures. The problem solved is: the real-time overconstrained reconstruction
of a curve from measured gradients. Such systems are commonly encountered in
the monitoring of structures and/or ground subsidence.Comment: 24 pages, journal articl
Training a Binary Weight Object Detector by Knowledge Transfer for Autonomous Driving
Autonomous driving has harsh requirements of small model size and energy
efficiency, in order to enable the embedded system to achieve real-time
on-board object detection. Recent deep convolutional neural network based
object detectors have achieved state-of-the-art accuracy. However, such models
are trained with numerous parameters and their high computational costs and
large storage prohibit the deployment to memory and computation resource
limited systems. Low-precision neural networks are popular techniques for
reducing the computation requirements and memory footprint. Among them, binary
weight neural network (BWN) is the extreme case which quantizes the float-point
into just bit. BWNs are difficult to train and suffer from accuracy
deprecation due to the extreme low-bit representation. To address this problem,
we propose a knowledge transfer (KT) method to aid the training of BWN using a
full-precision teacher network. We built DarkNet- and MobileNet-based binary
weight YOLO-v2 detectors and conduct experiments on KITTI benchmark for car,
pedestrian and cyclist detection. The experimental results show that the
proposed method maintains high detection accuracy while reducing the model size
of DarkNet-YOLO from 257 MB to 8.8 MB and MobileNet-YOLO from 193 MB to 7.9 MB.Comment: Accepted by ICRA 201
Electromagnetic-Thermal Analyses of Distributed Antennas Embedded into a Load Bearing Wall
The importance of indoor mobile connectivity has increased during the last
years, especially during the Covid-19 pandemic. In contrast, new
energy-efficient buildings contain structures like low-emissive windows and
multi-layered thermal insulations which all block radio signals effectively. To
solve this problem with indoor connectivity, we study passive antenna systems
embedded in walls of low-energy buildings. We provide analytical models of a
load bearing wall along with numerical and empirical evaluations of wideband
back-to-back antenna spiral antenna system in terms of electromagnetic- and
thermal insulation. The antenna systems are optimized to operate well when
embedded into load bearing walls. Unit cell models of the antenna embedded load
bearing wall, which are called signal-transmissive walls in this paper, are
developed to analyze their electromagnetic and thermal insulation properties.
We show that our signal-transmissive wall improves the electromagnetic
transmission compared to a raw load bearing wall over a wide bandwidth of 2.6-8
GHz, covering most of the cellular new radio frequency range 1, without
compromising the thermal insulation capability of the wall demanded by the
building regulation. Optimized antenna deployment is shown with 22 dB
improvement in electromagnetic transmission through the load bearing wall.Comment: 9 pages, 13 figures, submitted to IEEE Transactions on Antennas and
Propagatio
Methods of Technical Prognostics Applicable to Embedded Systems
Hlavní cílem dizertace je poskytnutí uceleného pohledu na problematiku technické prognostiky, která nachází uplatnění v tzv. prediktivní údržbě založené na trvalém monitorování zařízení a odhadu úrovně degradace systému či jeho zbývající životnosti a to zejména v oblasti komplexních zařízení a strojů. V současnosti je technická diagnostika poměrně dobře zmapovaná a reálně nasazená na rozdíl od technické prognostiky, která je stále rozvíjejícím se oborem, který ovšem postrádá větší množství reálných aplikaci a navíc ne všechny metody jsou dostatečně přesné a aplikovatelné pro embedded systémy. Dizertační práce přináší přehled základních metod použitelných pro účely predikce zbývající užitné životnosti, jsou zde popsány metriky pomocí, kterých je možné jednotlivé přístupy porovnávat ať už z pohledu přesnosti, ale také i z pohledu výpočetní náročnosti. Jedno z dizertačních jader tvoří doporučení a postup pro výběr vhodné prognostické metody s ohledem na prognostická kritéria. Dalším dizertačním jádrem je představení tzv. částicového filtrovaní (particle filtering) vhodné pro model-based prognostiku s ověřením jejich implementace a porovnáním. Hlavní dizertační jádro reprezentuje případovou studii pro velmi aktuální téma prognostiky Li-Ion baterii s ohledem na trvalé monitorování. Případová studie demonstruje proces prognostiky založené na modelu a srovnává možné přístupy jednak pro odhad doby před vybitím baterie, ale také sleduje možné vlivy na degradaci baterie. Součástí práce je základní ověření modelu Li-Ion baterie a návrh prognostického procesu.The main aim of the thesis is to provide a comprehensive overview of technical prognosis, which is applied in the condition based maintenance, based on continuous device monitoring and remaining useful life estimation, especially in the field of complex equipment and machinery. Nowadays technical prognosis is still evolving discipline with limited number of real applications and is not so well developed as technical diagnostics, which is fairly well mapped and deployed in real systems. Thesis provides an overview of basic methods applicable for prediction of remaining useful life, metrics, which can help to compare the different approaches both in terms of accuracy and in terms of computational/deployment cost. One of the research cores consists of recommendations and guide for selecting the appropriate forecasting method with regard to the prognostic criteria. Second thesis research core provides description and applicability of particle filtering framework suitable for model-based forecasting. Verification of their implementation and comparison is provided. The main research topic of the thesis provides a case study for a very actual Li-Ion battery health monitoring and prognostics with respect to continuous monitoring. The case study demonstrates the prognostic process based on the model and compares the possible approaches for estimating both the runtime and capacity fade. Proposed methodology is verified on real measured data.
Learning to infer: RL-based search for DNN primitive selection on Heterogeneous Embedded Systems
Deep Learning is increasingly being adopted by industry for computer vision
applications running on embedded devices. While Convolutional Neural Networks'
accuracy has achieved a mature and remarkable state, inference latency and
throughput are a major concern especially when targeting low-cost and low-power
embedded platforms. CNNs' inference latency may become a bottleneck for Deep
Learning adoption by industry, as it is a crucial specification for many
real-time processes. Furthermore, deployment of CNNs across heterogeneous
platforms presents major compatibility issues due to vendor-specific technology
and acceleration libraries. In this work, we present QS-DNN, a fully automatic
search based on Reinforcement Learning which, combined with an inference engine
optimizer, efficiently explores through the design space and empirically finds
the optimal combinations of libraries and primitives to speed up the inference
of CNNs on heterogeneous embedded devices. We show that, an optimized
combination can achieve 45x speedup in inference latency on CPU compared to a
dependency-free baseline and 2x on average on GPGPU compared to the best vendor
library. Further, we demonstrate that, the quality of results and time
"to-solution" is much better than with Random Search and achieves up to 15x
better results for a short-time search
- …