3,224 research outputs found
Optimality Properties, Distributed Strategies, and Measurement-Based Evaluation of Coordinated Multicell OFDMA Transmission
The throughput of multicell systems is inherently limited by interference and
the available communication resources. Coordinated resource allocation is the
key to efficient performance, but the demand on backhaul signaling and
computational resources grows rapidly with number of cells, terminals, and
subcarriers. To handle this, we propose a novel multicell framework with
dynamic cooperation clusters where each terminal is jointly served by a small
set of base stations. Each base station coordinates interference to neighboring
terminals only, thus limiting backhaul signalling and making the framework
scalable. This framework can describe anything from interference channels to
ideal joint multicell transmission.
The resource allocation (i.e., precoding and scheduling) is formulated as an
optimization problem (P1) with performance described by arbitrary monotonic
functions of the signal-to-interference-and-noise ratios (SINRs) and arbitrary
linear power constraints. Although (P1) is non-convex and difficult to solve
optimally, we are able to prove: 1) Optimality of single-stream beamforming; 2)
Conditions for full power usage; and 3) A precoding parametrization based on a
few parameters between zero and one. These optimality properties are used to
propose low-complexity strategies: both a centralized scheme and a distributed
version that only requires local channel knowledge and processing. We evaluate
the performance on measured multicell channels and observe that the proposed
strategies achieve close-to-optimal performance among centralized and
distributed solutions, respectively. In addition, we show that multicell
interference coordination can give substantial improvements in sum performance,
but that joint transmission is very sensitive to synchronization errors and
that some terminals can experience performance degradations.Comment: Published in IEEE Transactions on Signal Processing, 15 pages, 7
figures. This version corrects typos related to Eq. (4) and Eq. (28
Achievable Sum Rates of Half- and Full-Duplex Bidirectional OFDM Communication Links
While full-duplex (FD) transmission has the potential to double the system
capacity, its substantial benefit can be offset by the self-interference (SI)
and non-ideality of practical transceivers. In this paper, we investigate the
achievable sum rates (ASRs) of half-duplex (HD) and FD transmissions with
orthogonal frequency division multiplexing (OFDM), where the non-ideality is
taken into consideration. Four transmission strategies are considered, namely
HD with uniform power allocation (UPA), HD with non-UPA (NUPA), FD with UPA,
and FD with NUPA. For each of the four transmission strategies, an optimization
problem is formulated to maximize its ASR, and a (suboptimal/optimal) solution
with low complexity is accordingly derived. Performance evaluations and
comparisons are conducted for three typical channels, namely symmetric
frequency-flat/selective and asymmetric frequency-selective channels. Results
show that the proposed solutions for both HD and FD transmissions can achieve
near optimal performances. For FD transmissions, the optimal solution can be
obtained under typical conditions. In addition, several observations are made
on the ASR performances of HD and FD transmissions.Comment: To appear in IEEE TVT. This paper solves the problem of sum
achievable rate optimization of bidirectional FD OFDM link, where joint time
and power allocation is involve
Sum Throughput Maximization in Multi-Tag Backscattering to Multiantenna Reader
Backscatter communication (BSC) is being realized as the core technology for
pervasive sustainable Internet-of-Things applications. However, owing to the
resource-limitations of passive tags, the efficient usage of multiple antennas
at the reader is essential for both downlink excitation and uplink detection.
This work targets at maximizing the achievable sum-backscattered-throughput by
jointly optimizing the transceiver (TRX) design at the reader and
backscattering coefficients (BC) at the tags. Since, this joint problem is
nonconvex, we first present individually-optimal designs for the TRX and BC. We
show that with precoder and {combiner} designs at the reader respectively
targeting downlink energy beamforming and uplink Wiener filtering operations,
the BC optimization at tags can be reduced to a binary power control problem.
Next, the asymptotically-optimal joint-TRX-BC designs are proposed for both low
and high signal-to-noise-ratio regimes. Based on these developments, an
iterative low-complexity algorithm is proposed to yield an efficient
jointly-suboptimal design. Thereafter, we discuss the practical utility of the
proposed designs to other application settings like wireless powered
communication networks and BSC with imperfect channel state information.
Lastly, selected numerical results, validating the analysis and shedding novel
insights, demonstrate that the proposed designs can yield significant
enhancement in the sum-backscattered throughput over existing benchmarks.Comment: 17 pages, 5 figures, accepted for publication in IEEE Transactions on
Communication
Hardware Impairments Aware Transceiver Design for Bidirectional Full-Duplex MIMO OFDM Systems
In this paper we address the linear precoding and decoding design problem for
a bidirectional orthogonal frequencydivision multiplexing (OFDM) communication
system, between two multiple-input multiple-output (MIMO) full-duplex (FD)
nodes. The effects of hardware distortion as well as the channel state
information error are taken into account. In the first step, we transform the
available time-domain characterization of the hardware distortions for FD MIMO
transceivers to the frequency domain, via a linear Fourier transformation. As a
result, the explicit impact of hardware inaccuracies on the residual
selfinterference (RSI) and inter-carrier leakage (ICL) is formulated in
relation to the intended transmit/received signals. Afterwards, linear
precoding and decoding designs are proposed to enhance the system performance
following the minimum-mean-squarederror (MMSE) and sum rate maximization
strategies, assuming the availability of perfect or erroneous CSI. The proposed
designs are based on the application of alternating optimization over the
system parameters, leading to a necessary convergence. Numerical results
indicate that the application of a distortionaware design is essential for a
system with a high hardware distortion, or for a system with a low thermal
noise variance.Comment: Submitted to IEEE for publicatio
Feedback Allocation For OFDMA Systems With Slow Frequency-domain Scheduling
We study the problem of allocating limited feedback resources across multiple
users in an orthogonal-frequency-division-multiple-access downlink system with
slow frequency-domain scheduling. Many flavors of slow frequency-domain
scheduling (e.g., persistent scheduling, semi-persistent scheduling), that
adapt user-sub-band assignments on a slower time-scale, are being considered in
standards such as 3GPP Long-Term Evolution. In this paper, we develop a
feedback allocation algorithm that operates in conjunction with any arbitrary
slow frequency-domain scheduler with the goal of improving the throughput of
the system. Given a user-sub-band assignment chosen by the scheduler, the
feedback allocation algorithm involves solving a weighted sum-rate maximization
at each (slow) scheduling instant. We first develop an optimal
dynamic-programming-based algorithm to solve the feedback allocation problem
with pseudo-polynomial complexity in the number of users and in the total
feedback bit budget. We then propose two approximation algorithms with
complexity further reduced, for scenarios where the problem exhibits additional
structure.Comment: Accepted to IEEE Transactions on Signal Processin
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
- …