Underwater intervention robotics: An outline of the Italian national project Maris

The Italian national project MARIS (Marine Robotics for Interventions) pursues the strategic objective of studying, developing, and integrating technologies and methodologies to enable the development of autonomous underwater robotic systems employable for intervention activities. These activities are becoming progressively more typical for the underwater offshore industry, for search-and-rescue operations, and for underwater scientific missions. Within such an ambitious objective, the project consortium also intends to demonstrate the achievable operational capabilities at a proof-of-concept level by integrating the results with prototype experimental systems

TRIDENT: A Framework for Autonomous Underwater Intervention

TRIDENT is a STREP project recently approved by the European Commission whose proposal was submitted to the ICT call 4 of the 7th Framework Program. The project proposes a new methodology for multipurpose underwater intervention tasks. To that end, a cooperative team formed with an Autonomous Surface Craft and an Intervention Autonomous Underwater Vehicle will be used. The proposed methodology splits the mission in two stages mainly devoted to survey and intervention tasks, respectively. The project brings together research skills specific to the marine environments in navigation and mapping for underwater robotics, multi-sensory perception, intelligent control architectures, vehiclemanipulator systems and dexterous manipulation. TRIDENT is a three years project and its start is planned by first months of 2010.This work is partially supported by the European Commission through FP7-ICT2009-248497 projec

ISME research trends: Marine robotics for emergencies at sea

One of the main recent research trends of the Italian Interuniversity Research Center on Integrated Systems for Marine Environment (ISME) is the use of marine cooperative teams of autonomous robots within the fields of security, prevention and management of emergencies at sea. Such fields are of worldwide interest for obvious reasons, but they have recently gained relevance in the current historical moment, especially in the Mediterranean sea. Within such a dramatic context, the use of robots could certainly provide helpful for the execution of patrolling and detection, identification and classification of interesting elements, such as people to be saved or oil leaks, as well as the successive execution of the intervention/rescue strategy. This paper presents the Key Enabling Technologies as well as some Key Research Areas that are being currently investigated by ISME toward the ambitious objective of employing robotic solutions for the management of emergencies at sea

A New Virtual Reality Interface for Underwater Intervention Missions

Ponencia presentada en IFAC-PapersOnLine, Volume 53, Issue 2, 2020, Pages 14600-14607Nowadays, most underwater intervention missions are developed through the well-known work-class ROVs (Remote Operated Vehicles), equipped with teleoperated arms under human supervision. Thus, despite the appearance on the market of the first prototypes of the so-called I-AUV (Autonomous Underwater Vehicles for Intervention), the most mature technology associated with ROVs continues to be trusted. In order to fill the gap between ROVs and incipient I-AUVs technology, new research is under progress in our laboratory. In particular, new HRI (Human Robot Interaction) capabilities are being tested inside a three-year Spanish coordinated project focused on cooperative underwater intervention missions. In this work new results are presented concerning a new user interface which includes immersion capabilities through Virtual Reality (VR) technology. It is worth noting that a new HRI module has been demonstrated, through a pilot study, in which the users had to solve some specific tasks, with minimum guidance and instructions, following simple Problem Based Learning (PBL) scheme. Finally, it is noticeable that, although this is only a work in progress, the obtained results are promising concerning friendly and intuitive characteristics of the developed HRI module. Thus, some critical aspects, like complexity fall, training time and cognitive fatigue of the ROV pilot, seem more affordable now

TWINBOT: Autonomous Underwater Cooperative Transportation

Underwater Inspection, Maintenance, and Repair operations are nowadays performed using Remotely Operated Vehicles (ROV) deployed from dynamic-positioning vessels, having high daily operational costs. During the last twenty years, the research community has been making an effort to design new Intervention Autonomous Underwater Vehicles (I-AUV), which could, in the near future, replace the ROVs, significantly decreasing these costs. Until now, the experimental work using I-AUVs has been limited to a few single-vehicle interventions, including object search and recovery, valve turning, and hot stab operations. More complex scenarios usually require the cooperation of multiple agents, i.e., the transportation of large and heavy objects. Moreover, using small, autonomous vehicles requires consideration of their limited load capacity and limited manipulation force/torque capabilities. Following the idea of multi-agent systems, in this paper we propose a possible solution: using a group of cooperating I-AUVs, thus sharing the load and optimizing the stress exerted on the manipulators. Specifically, we tackle the problem of transporting a long pipe. The presented ideas are based on a decentralized Task-Priority kinematic control algorithm adapted for the highly limited communication bandwidth available underwater. The aforementioned pipe is transported following a sequence of poses. A path-following algorithm computes the desired velocities for the robots’ end-effectors, and the on-board controllers ensure tracking of these setpoints, taking into account the geometry of the pipe and the vehicles’ limitations. The utilized algorithms and their practical implementation are discussed in detail and validated through extensive simulations and experimental trials performed in a test tank using two 8 DOF I-AUV

Service-oriented agent architecture for autonomous maritime vehicles

Advanced ocean systems are increasing their capabilities and the degree of autonomy more and more in order to perform more sophisticated maritime missions. Remotely operated vehicles are no longer cost-effective since they are limited by economic support costs, and the presence and skills of the human operator. Alternatively, autonomous surface and underwater vehicles have the potential to operate with greatly reduced overhead costs and level of operator intervention. This Thesis proposes an Intelligent Control Architecture (ICA) to enable multiple collaborating marine vehicles to autonomously carry out underwater intervention missions. The ICA is generic in nature but aimed at a case study where a marine surface craft and an underwater vehicle are required to work cooperatively. They are capable of cooperating autonomously towards the execution of complex activities since they have different but complementary capabilities. The architectural foundation to achieve the ICA lays on the flexibility of service-oriented computing and agent technology. An ontological database captures the operator skills, platform capabilities and, changes in the environment. The information captured, stored as knowledge, enables reasoning agents to plan missions based on the current situation. The ICA implementation is verified in simulation, and validated in trials by means of a team of autonomous marine robots. This Thesis also presents architectural details and evaluation scenarios of the ICA, results of simulations and trials from different maritime operations, and future research directions

Intervention AUVs: The Next Challenge

While commercially available AUVs are routinely used in survey missions, a new set of applications exist which clearly demand intervention capabilities. The maintenance of: permanent underwater observatories, submerged oil wells, cabled sensor networks, pipes and the deployment and recovery of benthic stations are a few of them. These tasks are addressed nowadays using manned submersibles or work-class ROVs, equipped with teleoperated arms under human supervision. Although researchers have recently opened the door to future I-AUVs, a long path is still necessary to achieve autonomous underwater interventions. This paper reviews the evolution timeline in autonomous underwater intervention systems. Milestone projects in the state of the art are reviewed, highlighting their principal contributions to the field. To the best of the authors knowledge, only three vehicles have demonstrated some autonomous intervention capabilities so far: ALIVE, SAUVIM and GIRONA 500, being the last one the lightest one. In this paper GIRONA 500 I-AUV is presented and its software architecture discussed. Recent results in different scenarios are reported: 1) Valve turning and connector plugging/unplugging while docked to a subsea panel, 2) Free floating valve turning using learning by demonstration, and 3) Multipurpose free-floating object recovery. The paper ends discussing the lessons learned so far

Robotized underwater interventions

Working in underwater environments poses many challenges for robotic systems. One of them is the low bandwidth and high latency of underwater acoustic communications, which limits the possibility of interaction with submerged robots. One solution is to have a tether cable to enable high speed and low latency communications, but that requires a support vessel and increases costs. For that reason, autonomous underwater robots are a very interesting solution. Several research projects have demonstrated autonomy capabilities of Underwater Vehicle Manipulator Systems (UVMS) in performing basic manipulation tasks, and, moving a step further, this chapter will present a unifying architecture for the control of an UVMS, comprehensive of all the control objectives that an UVMS should take into account, their different priorities and the typical mission phases that an UVMS has to tackle. The proposed strategy is supported both by a complete simulated execution of a test-case mission and experimental results