Architectural and mobility management designs in internet-based infrastructure wireless mesh networks

Wireless mesh networks (WMNs) have recently emerged to be a cost-effective solution to support large-scale wireless Internet access. They have numerous ap- plications, such as broadband Internet access, building automation, and intelligent transportation systems. One research challenge for Internet-based WMNs is to design efficient mobility management techniques for mobile users to achieve seamless roam- ing. Mobility management includes handoff management and location management. The objective of this research is to design new handoff and location management techniques for Internet-based infrastructure WMNs. Handoff management enables a wireless network to maintain active connections as mobile users move into new service areas. Previous solutions on handoff manage- ment in infrastructure WMNs mainly focus on intra-gateway mobility. New handoff issues involved in inter-gateway mobility in WMNs have not been properly addressed. Hence, a new architectural design is proposed to facilitate inter-gateway handoff man- agement in infrastructure WMNs. The proposed architecture is designed to specifi- cally address the special handoff design challenges in Internet-based WMNs. It can facilitate parallel executions of handoffs from multiple layers, in conjunction with a data caching mechanism which guarantees minimum packet loss during handoffs. Based on the proposed architecture, a Quality of Service (QoS) handoff mechanism is also proposed to achieve QoS requirements for both handoff and existing traffic before and after handoffs in the inter-gateway WMN environment. Location management in wireless networks serves the purpose of tracking mobile users and locating them prior to establishing new communications. Existing location management solutions proposed for single-hop wireless networks cannot be directly applied to Internet-based WMNs. Hence, a dynamic location management framework in Internet-based WMNs is proposed that can guarantee the location management performance and also minimize the protocol overhead. In addition, a novel resilient location area design in Internet-based WMNs is also proposed. The formation of the location areas can adapt to the changes of both paging load and service load so that the tradeoff between paging overhead and mobile device power consumption can be balanced, and at the same time, the required QoS performance of existing traffic is maintained. Therefore, together with the proposed handoff management design, efficient mobility management can be realized in Internet-based infrastructure WMNs

Virtual Mobility Domains - A Mobility Architecture for the Future Internet

The advances in hardware and wireless technologies have made mobile communication devices affordable by a vast user community. With the advent of rich multimedia and social networking content, an influx of myriads of applications, and Internet supported services, there is an increasing user demand for the Internet connectivity anywhere and anytime. Mobility management is thus a crucial requirement for the Internet today. This work targets novel mobility management techniques, designed to work with the Floating Cloud Tiered (FCT) internetworking model, proposed for a future Internet. We derive the FCT internetworking model from the tiered structure existing among Internet Service Provider (ISP) networks, to define their business and peering relationships. In our novel mobility management scheme, we define Virtual Mobility Domains (VMDs) of various scopes, that can support both intra and inter-domain roaming using a single address for a mobile node. The scheme is network based and hence imposes no operational load on the mobile node. This scheme is the first of its kind, by leveraging the tiered structure and its hierarchical properties, the collaborative network-based mobility management mechanism, and the inheritance information in the tiered addresses to route packets. The contributions of this PhD thesis can be summarized as follows: · We contribute to the literature with a comprehensive analysis of the future Internet architectures and mobility protocols over the period of 2002-2012, in light of their identity and handoff management schemes. We present a qualitative evaluation of current and future schemes on a unified platform. · We design and implement a novel user-centric future Internet mobility architecture called Virtual Mobility Domain. VMD proposes a seamless, network-based, unique collaborative mobility management within/across ASes and ISPs in the FCT Internetworking model. The analytical and simulation-based handoff performance analysis of the VMD architecture in comparison with the IPv6-based mobility protocols presents the considerable performance improvements achieved by the VMD architecture. · We present a novel and user-centric handoff cost framework to analyze handoff performance of different mobility schemes. The framework helps to examine the impacts of registration costs, signaling overhead, and data loss for Internet connected mobile users employing a unified cost metric. We analyze the effect of each parameter in the handoff cost framework on the handoff cost components. We also compare the handoff performance of IPv6-based mobility protocols to the VMD. · We present a handoff cost optimization problem and analysis of its characteristics. We consider a mobility user as the primary focus of our study. We then identify the suitable mathematical methods that can be leveraged to solve the problem. We model the handoff cost problem in an optimization tool. We also conduct a mobility study - best of our knowledge, first of its kind - on providing a guide for finding the number of handoffs in a typical VMD for any given user\u27s mobility model. Plugging the output of mobility study, we then conduct a numerical analysis to find out optimum VMD for a given user mobility model and check if the theoretical inferences are in agreement with the output of the optimization tool

Mobility management for Wi-Fi infrastructure and mesh networks

Magister Scientiae - MScThis thesis shows that mobility management protocols for infrastructure Internet may be used in a wireless mesh network environment. In this research Mobile IPv6 and Fast Handover for Hierarchical Mobile IPv6 are successfully implemented in a wireless mesh network environment. Two experiments were carried out: vertical and horizontal handover simulations. Vertical handover simulation involved a heterogeneous wireless environment comprising both wireless local area and wireless mesh networks. An OPNET Mobile IPv6 model was used to simulate the vertical handover experiment. Horizontal handover simulation involved Mobile IPv6 and Fast Handover for Hierarchical Mobile IPv6 applied in ns2 wireless mesh network. The vertical handover results show that MIPv6 is able to manage vertical handover between wireless local area and wireless mesh network. The horizontal handover results illustrate that in mesh networks, Fast Handover for Hierarchical Mobile IPv6's performance is superior to Mobile IPv6. Fast Handover for Hierarchical Mobile IPv6 generates more throughput and less delay than Mobile IPv6. Furthermore, Fast Handover for Hierarchical Mobile IPv6 drops less data packets than Mobile IPv6. The simulations indicate that even though there are multi-hop communications in wireless mesh networks, the performance of the multi-hop routing may not play a big role in the handover performance. This is so because the mesh routers are mostly static and the multi-hop routes are readily available. Thus, the total handover delay is not affected too much by the WMN hops in the paths for signaling message transmission.South Afric

Hybrid routing and bridging strategies for large scale mobile ad hoc networks

Multi-hop packet radio networks (or mobile ad-hoc networks) are an ideal technology to establish instant communication infrastructure for military and civilian applications in which both hosts and routers are mobile. In this dissertation, a position-based/link-state hybrid, proactive routing protocol (Position-guided Sliding-window Routing - PSR) that provides for a flat, mobile ad-hoc routing architecture is described, analyzed and evaluated. PSR is based on the superposition of link-state and position-based routing, and it employs a simplified way of localizing routing overhead, without having to resort to complex, multiple-tier routing organization schemes. A set of geographic routing zones is defined for each node, where the purpose of the ith routing zone is to restrict propagation of position updates, advertising position differentials equal to the radius of the (i-i )th routing zone. Thus, the proposed protocol controls position-update overhead generation and propagation by making the overhead generation rate and propagation distance directly proportional to the amount of change in a node\u27s geographic position. An analytical model and framework is provided, in order to study the various design issues and trade-offs of PSR routing mechanism, discuss their impact on the protocol\u27s operation and effectiveness, and identify optimal values for critical design parameters, under different mobility scenarios. In addition an in-depth performance evaluation, via modeling and simulation, was performed in order to demonstrate PSR\u27s operational effectiveness in terms of scalability, mobility support, and efficiency. Furthermore, power and energy metrics, such as path fading and battery capacity considerations, are integrated into the routing decision (cost function) in order to improve PSR\u27s power efficiency and network lifetime. It is demonstrated that the proposed routing protocol is ideal for deployment and implementation especially in large scale mobile ad hoc networks. Wireless local area networks (WLAN) are being deployed widely to support networking needs of both consumer and enterprise applications, and IEEE 802.11 specification is becoming the de facto standard for deploying WLAN. However IEEE 802.11 specifications allow only one hop communication between nodes. A layer-2 bridging solution is proposed in this dissertation, to increase the range of 802.11 base stations using ad hoc networking, and therefore solve the hotspot communication problem, where a large number of mobile users require Internet access through an access point. In the proposed framework nodes are divided into levels based on their distance (hops) from the access point. A layer-2 bridging tree is built based on the level concept, and a node in certain level only forwards packets to nodes in its neighboring level. The specific mechanisms for the forwarding tree establishment as well as for the data propagation are also introduced and discussed. An analytical model is also presented in order to analyze the saturation throughput of the proposed mechanism, while its applicability and effectiveness is evaluated via modeling and simulation. The corresponding numerical results demonstrate and confirm the significant area coverage extension that can be achieved by the solution, when compared with the conventional 802.1 lb scheme. Finally, for implementation purposes, a hierarchical network structure paradigm based on the combination of these two protocols and models is introduced

Smart handoff technique for internet of vehicles communication using dynamic edge-backup node

© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/electronics9030524A vehicular adhoc network (VANET) recently emerged in the the Internet of Vehicles (IoV); it involves the computational processing of moving vehicles. Nowadays, IoV has turned into an interesting field of research as vehicles can be equipped with processors, sensors, and communication devices. IoV gives rise to handoff, which involves changing the connection points during the online communication session. This presents a major challenge for which many standardized solutions are recommended. Although there are various proposed techniques and methods to support seamless handover procedure in IoV, there are still some open research issues, such as unavoidable packet loss rate and latency. On the other hand, the emerged concept of edge mobile computing has gained crucial attention by researchers that could help in reducing computational complexities and decreasing communication delay. Hence, this paper specifically studies the handoff challenges in cluster based handoff using new concept of dynamic edge-backup node. The outcomes are evaluated and contrasted with the network mobility method, our proposed technique, and other cluster-based technologies. The results show that coherence in communication during the handoff method can be upgraded, enhanced, and improved utilizing the proposed technique.Published onlin

Mobile-IP ad-hoc network MPLS-based with QoS support.

The support for Quality of Service (QoS) is the main focus of this thesis. Major issues and challenges for Mobile-IP Ad-Hoc Networks (MANETs) to support QoS in a multi-layer manner are considered discussed and investigated through simulation setups. Different parameters contributing to the subjective measures of QoS have been considered and consequently, appropriate testbeds were formed to measure these parameters and compare them to other schemes to check for superiority. These parameters are: Maximum Round-Trip Delay (MRTD), Minimum Bandwidth Guaranteed (MBG), Bit Error Rate (BER), Packet Loss Ratio (PER), End-To-End Delay (ETED), and Packet Drop Ratio (PDR) to name a few. For network simulations, NS-II (Network Simulator Version II) and OPNET simulation software systems were used.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .A355. Source: Masters Abstracts International, Volume: 44-03, page: 1444. Thesis (M.Sc.)--University of Windsor (Canada), 2005

Lunar Relay Satellite Network for Space Exploration: Architecture, Technologies and Challenges

NASA is planning a series of short and long duration human and robotic missions to explore the Moon and then Mars. A key objective of these missions is to grow, through a series of launches, a system of systems infrastructure with the capability for safe and sustainable autonomous operations at minimum cost while maximizing the exploration capabilities and science return. An incremental implementation process will enable a buildup of the communication, navigation, networking, computing, and informatics architectures to support human exploration missions in the vicinities and on the surfaces of the Moon and Mars. These architectures will support all space and surface nodes, including other orbiters, lander vehicles, humans in spacesuits, robots, rovers, human habitats, and pressurized vehicles. This paper describes the integration of an innovative MAC and networking technology with an equally innovative position-dependent, data routing, network technology. The MAC technology provides the relay spacecraft with the capability to autonomously discover neighbor spacecraft and surface nodes, establish variable-rate links and communicate simultaneously with multiple in-space and surface clients at varying and rapidly changing distances while making optimum use of the available power. The networking technology uses attitude sensors, a time synchronization protocol and occasional orbit-corrections to maintain awareness of its instantaneous position and attitude in space as well as the orbital or surface location of its communication clients. A position-dependent data routing capability is used in the communication relay satellites to handle the movement of data among any of multiple clients (including Earth) that may be simultaneously in view; and if not in view, the relay will temporarily store the data from a client source and download it when the destination client comes into view. The integration of the MAC and data routing networking technologies would enable a relay satellite system to provide end-to-end communication services for robotic and human missions in the vicinity, or on the surface of the Moon with a minimum of Earth-based operational support

Cross Layer Scheduling in WiMAX QOS for Disaster Management

How a base station assigns free resource slots to BE service class is depending on the available channel bandwidth after all the other classes have been served. Generally, it is known that the performance of BE is always the worst and provides the lowest level of quality compared to all other classes. However, if somewhat unexpected natural disaster strikes or an environmental catastrophe occurs, when the major communication infrastructure has been destroyed, it is possible that the only available Quality of Service (QoS) service is BE. Under this condition, users or, particularly, a rescue team will not have any other options but to use the only available service class for any types of applications including voice communications or even video communications. Based on that scenario, we have performed simulations using OPNET modeler simulation tool to evaluate the rtPS and BE performance with particular focus on video conferencing/streaming and also data transfer applications. Simulation results show that in certain situations, a user with BE QoS could provide better throughput compared to a user with rtPS. In addition, we also propose a cross layer scheduling mechanism by assigning the video conferencing/streaming application to BE service class and file transfer application to the rtPS service class.  The results obtained indicate that for certain combinations of users and QoS, BE service class demonstrates a higher throughput than rtPS. This scenario can be practically applied by a rescue team in any disaster management operations apart from normal teleconference service