Symmetry in Structural Health Monitoring

In this Special Issue on symmetry, we mainly discuss the application of symmetry in various structural health monitoring. For example, considering the health monitoring of a known structure, by obtaining the static or dynamic response of the structure, using different signal processing methods, including some advanced filtering methods, to remove the influence of environmental noise, and extract structural feature parameters to determine the safety of the structure. These damage diagnosis methods can also be effectively applied to various types of infrastructure and mechanical equipment. For this reason, the vibration control of various structures and the knowledge of random structure dynamics should be considered, which will promote the rapid development of the structural health monitoring. Among them, signal extraction and evaluation methods are also worthy of study. The improvement of signal acquisition instruments and acquisition methods improves the accuracy of data. A good evaluation method will help to correctly understand the performance with different types of infrastructure and mechanical equipment

A Framework for Life Cycle Cost Estimation of a Product Family at the Early Stage of Product Development

A cost estimation method is required to estimate the life cycle cost of a product family at the early stage of product development in order to evaluate the product family design. There are difficulties with existing cost estimation techniques in estimating the life cycle cost for a product family at the early stage of product development. This paper proposes a framework that combines a knowledge based system and an activity based costing techniques in estimating the life cycle cost of a product family at the early stage of product development. The inputs of the framework are the product family structure and its sub function. The output of the framework is the life cycle cost of a product family that consists of all costs at each product family level and the costs of each product life cycle stage. The proposed framework provides a life cycle cost estimation tool for a product family at the early stage of product development using high level information as its input. The framework makes it possible to estimate the life cycle cost of various product family that use any types of product structure. It provides detailed information related to the activity and resource costs of both parts and products that can assist the designer in analyzing the cost of the product family design. In addition, it can reduce the required amount of information and time to construct the cost estimation system

Numerical Computation, Data Analysis and Software in Mathematics and Engineering

The present book contains 14 articles that were accepted for publication in the Special Issue “Numerical Computation, Data Analysis and Software in Mathematics and Engineering” of the MDPI journal Mathematics. The topics of these articles include the aspects of the meshless method, numerical simulation, mathematical models, deep learning and data analysis. Meshless methods, such as the improved element-free Galerkin method, the dimension-splitting, interpolating, moving, least-squares method, the dimension-splitting, generalized, interpolating, element-free Galerkin method and the improved interpolating, complex variable, element-free Galerkin method, are presented. Some complicated problems, such as tge cold roll-forming process, ceramsite compound insulation block, crack propagation and heavy-haul railway tunnel with defects, are numerically analyzed. Mathematical models, such as the lattice hydrodynamic model, extended car-following model and smart helmet-based PLS-BPNN error compensation model, are proposed. The use of the deep learning approach to predict the mechanical properties of single-network hydrogel is presented, and data analysis for land leasing is discussed. This book will be interesting and useful for those working in the meshless method, numerical simulation, mathematical model, deep learning and data analysis fields

Sensors Fault Diagnosis Trends and Applications

Fault diagnosis has always been a concern for industry. In general, diagnosis in complex systems requires the acquisition of information from sensors and the processing and extracting of required features for the classification or identification of faults. Therefore, fault diagnosis of sensors is clearly important as faulty information from a sensor may lead to misleading conclusions about the whole system. As engineering systems grow in size and complexity, it becomes more and more important to diagnose faulty behavior before it can lead to total failure. In the light of above issues, this book is dedicated to trends and applications in modern-sensor fault diagnosis

Parametric Optimization of Taper Cutting Process using Wire Electrical Discharge Machining (WEDM)

Significant technological advancement of wire electrical discharge machining (WEDM) process has been observed in recent times in order to meet the requirements of various manufacturing fields especially in the production of parts with complex geometry in precision die industry. Taper cutting is an important application of WEDM process aiming at generating complex parts with tapered profiles. Wire deformation and breakage are more pronounced in taper cutting as compared with straight cutting resulting in adverse effect on desired taper angle and surface integrity. The reasons for associated problems may be attributed to certain stiffness of the wire. However, controlling the process parameters can somewhat reduce these problems. Extensive literature review reveals that effect of process parameters on various performance measures in taper cutting using WEDM is also not adequately addressed. Hence, study on effect of process parameters on performance measures using various advanced metals and metal matrix composites (MMC) has become the predominant research area in this field. In this context, the present work attempts to experimentally investigate the machining performance of various alloys, super alloys and metal matrix composite during taper cutting using WEDM process. The effect of process parameters such as part thickness, taper angle, pulse duration, discharge current, wire speed and wire tension on various performance measures such as angular error, surface roughness, cutting rate and white layer thickness are studied using Taguchi’s analysis. The functional relationship between the input parameters and performance measures has been developed by using non-linear regression analysis. Simultaneous optimization of the performance measures has been carried out using latest nature inspired algorithms such as multi-objective particle swarm optimization (MOPSO) and bat algorithm. Although MOPSO develops a set of non-dominated solutions, the best ranked solution is identified from a large number of solutions through application of maximum deviation method rather than resorting to human judgement. Deep cryogenic treatment of both wire and work material has been carried out to enhance the machining efficiency of the low conductive work material like Inconel 718. Finally, artificial intelligent models are proposed to predict the various performance measures prior to machining. The study offers useful insight into controlling the parameters to improve the machining efficiency

Assessment of monthly rain fade in the equatorial region at C & KU-band using measat-3 satellite links

C & Ku-band satellite communication links are the most commonly used for equatorial satellite communication links. Severe rainfall rate in equatorial regions can cause a large rain attenuation in real compared to the prediction. ITU-R P. 618 standards are commonly used to predict satellite rain fade in designing satellite communication network. However, the prediction of ITU-R is still found to be inaccurate hence hinder a reliable operational satellite communication link in equatorial region. This paper aims to provide an accurate insight by assessment of the monthly C & Ku-band rain fade performance by collecting data from commercial earth stations using C band and Ku-band antenna with 11 m and 13 m diameter respectively. The antennas measure the C & Ku-band beacon signal from MEASAT-3 under equatorial rain conditions. The data is collected for one year in 2015. The monthly cumulative distribution function is developed based on the 1-year data. RMSE analysis is made by comparing the monthly measured data of C-band and Ku-band to the ITU-R predictions developed based on ITU-R’s P.618, P.837, P.838 and P.839 standards. The findings show that Ku-band produces an average of 25 RMSE value while the C-band rain attenuation produces an average of 2 RMSE value. Therefore, the ITU-R model still under predicts the rain attenuation in the equatorial region and this call for revisit of the fundamental quantity in determining the rain fade for rain attenuation to be re-evaluated

Smart Monitoring and Control in the Future Internet of Things

The Internet of Things (IoT) and related technologies have the promise of realizing pervasive and smart applications which, in turn, have the potential of improving the quality of life of people living in a connected world. According to the IoT vision, all things can cooperate amongst themselves and be managed from anywhere via the Internet, allowing tight integration between the physical and cyber worlds and thus improving efficiency, promoting usability, and opening up new application opportunities. Nowadays, IoT technologies have successfully been exploited in several domains, providing both social and economic benefits. The realization of the full potential of the next generation of the Internet of Things still needs further research efforts concerning, for instance, the identification of new architectures, methodologies, and infrastructures dealing with distributed and decentralized IoT systems; the integration of IoT with cognitive and social capabilities; the enhancement of the sensing–analysis–control cycle; the integration of consciousness and awareness in IoT environments; and the design of new algorithms and techniques for managing IoT big data. This Special Issue is devoted to advancements in technologies, methodologies, and applications for IoT, together with emerging standards and research topics which would lead to realization of the future Internet of Things

Parametric Optimization of Taper Cutting Process using Wire Electrical Discharge Machining (WEDM)

Significant technological advancement of wire electrical discharge machining (WEDM) process has been observed in recent times in order to meet the requirements of various manufacturing fields especially in the production of parts with complex geometry in precision die industry. Taper cutting is an important application of WEDM process aiming at generating complex parts with tapered profiles. Wire deformation and breakage are more pronounced in taper cutting as compared with straight cutting resulting in adverse effect on desired taper angle and surface integrity. The reasons for associated problems may be attributed to certain stiffness of the wire. However, controlling the process parameters can somewhat reduce these problems. Extensive literature review reveals that effect of process parameters on various performance measures in taper cutting using WEDM is also not adequately addressed. Hence, study on effect of process parameters on performance measures using various advanced metals and metal matrix composites (MMC) has become the predominant research area in this field. In this context, the present work attempts to experimentally investigate the machining performance of various alloys, super alloys and metal matrix composite during taper cutting using WEDM process. The effect of process parameters such as part thickness, taper angle, pulse duration, discharge current, wire speed and wire tension on various performance measures such as angular error, surface roughness, cutting rate and white layer thickness are studied using Taguchi’s analysis. The functional relationship between the input parameters and performance measures has been developed by using non-linear regression analysis. Simultaneous optimization of the performance measures has been carried out using latest nature inspired algorithms such as multi-objective particle swarm optimization (MOPSO) and bat algorithm. Although MOPSO develops a set of non-dominated solutions, the best ranked solution is identified from a large number of solutions through application of maximum deviation method rather than resorting to human judgement. Deep cryogenic treatment of both wire and work material has been carried out to enhance the machining efficiency of the low conductive work material like Inconel 718. Finally, artificial intelligent models are proposed to predict the various performance measures prior to machining. The study offers useful insight into controlling the parameters to improve the machining efficiency

Pattern Recognition

Pattern recognition is a very wide research field. It involves factors as diverse as sensors, feature extraction, pattern classification, decision fusion, applications and others. The signals processed are commonly one, two or three dimensional, the processing is done in real- time or takes hours and days, some systems look for one narrow object class, others search huge databases for entries with at least a small amount of similarity. No single person can claim expertise across the whole field, which develops rapidly, updates its paradigms and comprehends several philosophical approaches. This book reflects this diversity by presenting a selection of recent developments within the area of pattern recognition and related fields. It covers theoretical advances in classification and feature extraction as well as application-oriented works. Authors of these 25 works present and advocate recent achievements of their research related to the field of pattern recognition

Physical Diagnosis and Rehabilitation Technologies

The book focuses on the diagnosis, evaluation, and assistance of gait disorders; all the papers have been contributed by research groups related to assistive robotics, instrumentations, and augmentative devices