A New Ultra Low-Power and Noise Tolerant Circuit Technique for CMOS Domino Logic

Dynamic logic style is used in high performance circuit design because of its fast speed and less transistors requirement as compared to CMOS logic style. But it is not widely accepted for all types of circuit implementations due to its less noise tolerance and charge sharing problems. A small noise at the input of the dynamic logic can change the desired output. Domino logic uses one static CMOS inverter at the output of dynamic node which is more noise immune and consuming very less power as compared to other proposed circuit. In this paper we have proposed a novel circuit for domino logic which has less noise at the output node and has very less power-delay product (PDP) as compared to previous reported articles. Low PDP is achieved by using semi-dynamic logic buffer and also reducing leakage current when PDN is not conducting

Current Comparison Domino based CHSK Domino Logic Technique for Rapid Progression and Low Power Alleviation

The proposed domino logic is developed with the combination of Current Comparison Domino (CCD) logic and Conditional High Speed Keeper (CHSK) domino logic. In order to improve the performance metrics like power, delay and noise immunity, the redesign of CHSK is proposed with the CCD. The performance improvement is based on the parasitic capacitance, which reduces on the dynamic node for robust and rapid process of the circuit. The proposed domino logic is designed with keeper and without keeper to measure the performance metrics of the circuit. The outcomes of the proposed domino logic are better when compared to the existing domino logic circuits. The simulation of the proposed CHSK based on the CCD logic circuit is carried out in Cadence Virtuoso tool

Analysis of High-Performance Near-threshold Dual Mode Logic design

A novel dual mode logic (DML) model has a superior energy-performance compare to CMOS logic. The DML model has unique feature that allows switching between both modes of operation as per the real-time system requirements. The DML functions in two dissimilar modes (static and dynamic) of operation with its specific features, to selectively obtain either low-energy or high-performance. The sub-threshold region DML achieves minimum-energy. However, sub-threshold region consequence in performance is enormous. In this paper, the working of DML model in the moderate inversion region has been explored. The near-threshold region holds much of the energy saving of sub-threshold designs, along with improved performance. Furthermore, robustness to supply voltage and sensitivity to the process temperature variations are presented. Monte carol analysis shows that the projected near-threshold region has minimum energy along with the moderate performance

NP domino logic gates for Ultra Low Voltage and High Speed applications

In this thesis we present different configurations of digital circuits exploiting Ultra Low Voltage (ULV) NP domino logic style. The proposed logic style is utilized with the help of Floating gate transistors. The proposed NP domino logic gates are aimed to perform high speed operations in Ultra Low Voltage applications. The presented circuits may operate near the sub-threshold regime where the supply voltage is near the threshold voltage of the transistors. In terms of frequency, speed, robustness, Power Delay Product (PDP) and Energy Delay Product (EDP), the proposed ULV NP domino logic gates may offer significant improvement compared to the conventional CMOS logic gates. Different implementations of NOT, NAND and NOR gates are presented using both conventional and Pass Transistor Logic styles. Further, NAND and NOR gates are used to employ different configurations of Carry gates which is a speed limited factor in many arithmetic operations. These ULV NP domino Carry gates are simulated at different supply voltages in the range of 100mV to 400mV, and the performance results are presented with respect to delay, power, PDP and EDP. The proposed ULV NP domino Carry gates are cascaded together to perform addition in a 32-bit chain. The circuits are operated with respect to worst case scenario where the carry signal propagates through the whole chain. Multi-threshold (MTCMOS) and Variable-threshold (VTCMOS) techniques are employed in the ULV domino 32-bit carry chain in order to reduce the power consumption, meanwhile offering superb speed performance. Although the 32-bit carry chain offers a great advantage of speed improvement in the worst case scenario, the chain also introduces the drawback of enormous power consumption in the idle mode. The work in this thesis has resulted in three papers. Two of these papers represent various configurations of 1-bit ULV NP domino Carry gates, while the third paper examines the performance of one of the proposed ULV NP domino Carry gates in a 32-bit chain. The simulation results presented in this thesis are obtained using a 90nm TSMC CMOS process

A 2x2 bit multiplier using hybrid 13t full adder with vedic mathematics method

Various arithmetic circuits such as multipliers require full adder (FA) as the main block for the circuit to operate. Speed and energy consumption become very vital in design consideration for a low power adder. In this paper, a 2x2 bit Vedic multiplier using hybrid full adder (HFA) with 13 transistors (13T) had been designed successfully. The design was simulated using Synopsys Custom Tools in General Purpose Design Kit (GPDK) 90 nm CMOS technology process. In this design, four AND gates and two hybrid FA (HFAs) are cascaded together and each HFA is constructed from three modules. The cascaded module is arranged in the Vedic mathematics algorithm. This algorithm satisfied the requirement of a fast multiplication operation because of the vertical and crosswise architecture from the Urdhva Triyakbyam Sutra which reduced the number of partial products compared to the conventional multiplication algorithm. With the combination of hybrid full adder and Vedic mathematics, a new combination of multiplier method with low power and low delay is produced. Performance parameters such as power consumption and delay were compared to some of the existing designs. With a 1V voltage supply, the average power consumption of the proposed multiplier was found to be 22.96 µW and a delay of 161 ps

Review of Clocked Storage Elements in Digital Circuit Design

Storage of digital circuit is "state" or memory. These are called sequential circuits. The most fundamental sequential circuit type that we will ponder is known as the Flip-Flop. It is ponder four distinct assortments of these gadgets and their utilization in registers and register documents, which can be considered as one type of on– CPU memory. The traditional memory, called RAM, is ordinarily not on the CPU chip. Regular Slam and its assortments, including RAM, ROM, SRAM, Measure, and SDRAM. True single-phase clock (TSPC) method of reasoning has found wide use in advanced plan. At first as a quick topology, the TSPC structure in like manner eats up less power and includes less areas than various systems. In flip-flop plan only a single transistor is being clocked by short heartbeat get ready which is known as True Single Phase Clocking (TSPC) flip-flop

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER