209 research outputs found
Dirty RF Signal Processing for Mitigation of Receiver Front-end Non-linearity
Moderne drahtlose Kommunikationssysteme stellen hohe und teilweise
gegensätzliche Anforderungen an die Hardware der Funkmodule, wie z.B.
niedriger Energieverbrauch, große Bandbreite und hohe Linearität. Die
Gewährleistung einer ausreichenden Linearität ist, neben anderen analogen
Parametern, eine Herausforderung im praktischen Design der Funkmodule. Der
Fokus der Dissertation liegt auf breitbandigen HF-Frontends für
Software-konfigurierbare Funkmodule, die seit einigen Jahren kommerziell
verfügbar sind. Die praktischen Herausforderungen und Grenzen solcher
flexiblen Funkmodule offenbaren sich vor allem im realen Experiment. Eines
der Hauptprobleme ist die Sicherstellung einer ausreichenden analogen
Performanz über einen weiten Frequenzbereich. Aus einer Vielzahl an
analogen Störeffekten behandelt die Arbeit die Analyse und Minderung von
Nichtlinearitäten in Empfängern mit direkt-umsetzender Architektur. Im
Vordergrund stehen dabei Signalverarbeitungsstrategien zur Minderung
nichtlinear verursachter Interferenz - ein Algorithmus, der besser unter
"Dirty RF"-Techniken bekannt ist. Ein digitales Verfahren nach der
Vorwärtskopplung wird durch intensive Simulationen, Messungen und
Implementierung in realer Hardware verifiziert. Um die Lücken zwischen
Theorie und praktischer Anwendbarkeit zu schließen und das Verfahren in
reale Funkmodule zu integrieren, werden verschiedene Untersuchungen
durchgeführt. Hierzu wird ein erweitertes Verhaltensmodell entwickelt, das
die Struktur direkt-umsetzender Empfänger am besten nachbildet und damit
alle Verzerrungen im HF- und Basisband erfasst. Darüber hinaus wird die
Leistungsfähigkeit des Algorithmus unter realen Funkkanal-Bedingungen
untersucht. Zusätzlich folgt die Vorstellung einer ressourceneffizienten
Echtzeit-Implementierung des Verfahrens auf einem FPGA. Abschließend
diskutiert die Arbeit verschiedene Anwendungsfelder, darunter spektrales
Sensing, robuster GSM-Empfang und GSM-basiertes Passivradar. Es wird
gezeigt, dass nichtlineare Verzerrungen erfolgreich in der digitalen
Domäne gemindert werden können, wodurch die Bitfehlerrate gestörter
modulierter Signale sinkt und der Anteil nichtlinear verursachter
Interferenz minimiert wird. Schließlich kann durch das Verfahren die
effektive Linearität des HF-Frontends stark erhöht werden. Damit wird der
zuverlässige Betrieb eines einfachen Funkmoduls unter dem Einfluss der
Empfängernichtlinearität möglich. Aufgrund des flexiblen Designs ist der
Algorithmus für breitbandige Empfänger universal einsetzbar und ist nicht
auf Software-konfigurierbare Funkmodule beschränkt.Today's wireless communication systems place high requirements on the
radio's hardware that are largely mutually exclusive, such as low power
consumption, wide bandwidth, and high linearity. Achieving a sufficient
linearity, among other analogue characteristics, is a challenging issue in
practical transceiver design. The focus of this thesis is on wideband
receiver RF front-ends for software defined radio technology, which became
commercially available in the recent years. Practical challenges and
limitations are being revealed in real-world experiments with these radios.
One of the main problems is to ensure a sufficient RF performance of the
front-end over a wide bandwidth. The thesis covers the analysis and
mitigation of receiver non-linearity of typical direct-conversion receiver
architectures, among other RF impairments. The main focus is on DSP-based
algorithms for mitigating non-linearly induced interference, an approach
also known as "Dirty RF" signal processing techniques. The conceived
digital feedforward mitigation algorithm is verified through extensive
simulations, RF measurements, and implementation in real hardware. Various
studies are carried out that bridge the gap between theory and practical
applicability of this approach, especially with the aim of integrating that
technique into real devices. To this end, an advanced baseband behavioural
model is developed that matches to direct-conversion receiver architectures
as close as possible, and thus considers all generated distortions at RF
and baseband. In addition, the algorithm's performance is verified under
challenging fading conditions. Moreover, the thesis presents a
resource-efficient real-time implementation of the proposed solution on an
FPGA. Finally, different use cases are covered in the thesis that includes
spectrum monitoring or sensing, GSM downlink reception, and GSM-based
passive radar. It is shown that non-linear distortions can be successfully
mitigated at system level in the digital domain, thereby decreasing the bit
error rate of distorted modulated signals and reducing the amount of
non-linearly induced interference. Finally, the effective linearity of the
front-end is increased substantially. Thus, the proper operation of a
low-cost radio under presence of receiver non-linearity is possible. Due to
the flexible design, the algorithm is generally applicable for wideband
receivers and is not restricted to software defined radios
Dual-band FSK receiver and building block design for UWB impulse radio
Master'sMASTER OF ENGINEERIN
DESIGN OF A GAAS DISTRIBUTED AMPLIFIER WITH LC TRAPS BASED BROADBAND LINEARIZATION
Increasing the linearity of power amplifiers has been an important area of research because its signal integrity influences the performance of the entire transreceiver system and there are strict regulatory requirements on them. Due to the nonlinear behaviour of power amplifiers, third order intermodulation products are generated close to the desired signals and cannot be removed by filters. Increasing linearity will help bring these distortion products closer to the noise floor. However, it is not an easy task to increase linearity without trading off output power. To maintain the same level of output power generated but with higher linearity, many techniques, each with its own pros and cons, have been implemented to linearize an amplifier. Techniques involving feedback are seriously limited in terms of modulation bandwidth whereas methods such as predistortion and feedforward are very difficult to implement. This project seeks to use a simple method of placing terminations directly to the distributed amplifier (DA), making it a device level linearization technique and can be used in addition to the other system level techniques mentioned earlier. To increase linearity over a broad bandwidth of 0.5 to 3.0 GHz, this work proposes using low impedance terminations (LC traps) at the envelope frequency to the input and output of several distributed amplifiers. This research is novel since this is the first time broadband improvement in linearity has been demonstrated using the LC trap method. Two design iterations were completed (first design iteration has four variants to test the output trap while the second design iteration has three variants to test the input trap). The low impedance terminations are implemented using inductor-capacitor networks that are external to the monolithic microwave integrated circuit (MMIC). Design and layout of the DAs were carried out using Agilent’s Advanced Design System (ADS). Results show that placing the traps at the output of the DA does not truly affect the linearity of the device at lower frequencies but provide an improvement of 1.6 dB and 3.4 dB to the third-order output intercept point (OIP3) at 2.5 GHz and 3.0 GHz, respectively. With traps at the input, measurement results at -5 dBm input power,
viii
1.375 V base bias (61 mA total collector current) and 10 MHz two tone spacing show a broadband improvement throughout the band (0.5 GHz to 3.0 GHz) of 3.3 dB to 7.4 dB in OIP3. Furthermore, the OIP3 is increased to 19.2 dB above P1dB. Results show that the improvement in OIP3 comes without lowering gain, return loss or P1dB and without causing any stability problems
A novel fast time jamming analysis transmission selection technique for radar systems
The jamming analysis transmission selection (JATS) sub-system is used in radar systems to detect and avoid the jammed frequencies in the available operating bandwidth during signal transmission and reception. The available time to measure the desired frequency spectrum and select the non-jammed frequency for transmission is very limited. A novel fast time (FAT) technique that measures the channel spectrum, detects the jamming sub-band and selects the non-jammed frequency for radar system transmission in real time is proposed. A JATS sub-system has been designed, simulated, fabricated and implemented based on FAT technique to verify the idea. The novel FAT technique utilizes time-domain analysis instead of the well-known fast Fourier transform (FFT) used in conventional JATS sub-systems. Therefore, the proposed fast time jamming analysis transmission selection (FAT-JATS) sub-system outperforms other reported JATS sub-systems as it uses less FPGA resources, avoids time-delay occurred due to complex FFT calculations and enhances the real time operation. This makes the proposed technique an excellent candidate for JATS sub-systems
Millimetre-Wave Fibre-Wireless Technologies for 5G Mobile Fronthaul
The unprecedented growth in mobile data traffic, driven primarily by bandwidth rich applications and high definition video is accelerating the development of fifth generation (5G) mobile network. As mobile access network evolves towards centralisation, mobile fronthaul (MFH) architecture becomes essential in providing high capacity, ubiquitous and yet affordable services to subscribers. In order to meet the demand for high data rates in the access, Millimetre-wave (mmWave) has been highlighted as an essential technology in the development of 5G-new radio (5G-NR). In the present MFH architecture which is typically based on common public radio interface (CPRI) protocol, baseband signals are digitised before fibre transmission, featuring high overhead data and stringent synchronisation requirements. A direct application of mmWave 5G-NR to CPRI digital MFH, where signal bandwidth is expected to be up to 1GHz will be challenging, due to the increased complexity of the digitising interface and huge overhead data that will be required for such bandwidth. Alternatively, radio over fibre (RoF) technique can be employed in the transportation of mmWave wireless signals via the MFH link, thereby avoiding the expensive digitisation interface and excessive overhead associated with its implementation. Additionally, mmWave carrier can be realised with the aid of photonic components employed in the RoF link, further reducing the system complexity. However, noise and nonlinearities inherent to analog transmission presents implementation challenges, limiting the system dynamic range. Therefore, it is important to investigate the effects of these impairments in RoF based MFH architecture.
This thesis presents extensive research on the impact of noise and nonlinearities on 5G candidate waveforms, in mmWave 5G fibre wireless MFH. Besides orthogonal frequency division multiplexing (OFDM), another radio access technology (RAT) that has received significant attention is filter bank multicarrier (FBMC), particularly due to its high spectral containment and excellent performance in asynchronous transmission. Hence, FBMC waveform is adopted in this work to study the impact of noise and nonlinearities on the mmWave fibre-wireless MFH architecture. Since OFDM is widely deployed and it has been adopted for 5G-NR, the performance of OFDM and FBMC based 5G mmWave RAT in fibre wireless MFH architecture is compared for several implementations and transmission scenarios.
To this extent, an end to end transmission testbed is designed and implemented using industry standard VPI Transmission Maker® to investigate five mmWave upconversion techniques. Simulation results show that the impact of noise is higher in FBMC when the signal to-noise (SNR) is low, however, FBMC exhibits better performance compared to OFDM as the SNR improved. More importantly, an evaluation of the contribution of each noise component to the overall system SNR is carried out. It is observed in the investigation that noise contribution from the optical carriers employed in the heterodyne upconversion of intermediate frequency (IF) signals to mmWave frequency dominate the system noise. An adaptive modulation technique is employed to optimise the system throughput based on the received SNR. The throughput of FBMC based system reduced significantly compared to OFDM, due to laser phase noise and chromatic dispersion (CD). Additionally, it is shown that by employing frequency domain averaging technique to enhance the channel estimation (CE), the throughput of FBMC is significantly increased and consequently, a comparable performance is obtained for both waveforms.
Furthermore, several coexistence scenarios for multi service transmission are studied, considering OFDM and FBMC based RATs to evaluate the impact inter band interference (IBI), due to power amplifier (PA) nonlinearity on the system performance. The low out of band (OOB) emission in FBMC plays an important role in minimising IBI to adjacent services. Therefore, FBMC requires less guardband in coexistence with multiple services in 5G fibre-wireless MFH. Conversely, OFDM introduced significant OOB to adjacent services requiring large guardband in multi-service coexistence transmission scenario.
Finally, a novel transmission scheme is proposed and investigated to simultaneously generate multiple mmWave signals using laser heterodyning mmWave upconversion technique. With appropriate IF and optical frequency plan, several mmWave signals can be realised. Simulation results demonstrate successful simultaneous realisation of 28GHz, 38GHz, and 60GHz mmWave signals
Microwave Photonic Applications - From Chip Level to System Level
Die Vermischung von Mikrowellen- und optischen Technologien – Mikrowellenphotonik – ist ein neu aufkommendes Feld mit hohem Potential. Durch die Nutzung der Vorzüge beider Welten hat die Mikrowellenphotonik viele Anwendungsfälle und ist gerade erst am Beginn ihrer Erfolgsgeschichte. Der Weg für neue Konzepte, neue Komponenten und neue Anwendungen wird dadurch geebnet, dass ein höherer Grad an Integration sowie neue Technologien wie Silicon Photonics verfügbar sind. In diesem Werk werden zuerst die notwendigen grundlegenden Basiskomponenten – optische Quelle, elektro-optische Wandlung, Übertragungsmedium und opto-elektrische Wandlung – eingeführt. Mithilfe spezifischer Anwendungsbeispiele, die von Chipebene bis hin zur Systemebene reichen, wird der elektrooptische Codesign-Prozess veranschaulicht. Schließlich werden zukünftige Ausrichtungen wie die Unterstützung von elektrischen Trägern im Millimeterwellen- und THz-Bereich sowie Realisierungsoptionen in integrierter Optik und Nanophotonik diskutiert.The hybridization between microwave and optical technologies – microwave photonics – is an emerging field with high potential. Benefitting from the best of both worlds, microwave photonics has many use cases and is just at the beginning of its success story. The availability of a higher degree of integration and new technologies such as silicon photonics paves the way for new concepts, new components and new applications. In this work, first, the necessary basic building blocks – optical source, electro-optical conversion, transmission medium and opto-electrical conversion – are introduced. With the help of specific application examples ranging from chip level to system level, the electro-optical co-design process for microwave photonic systems is illustrated. Finally, future directions such as the support of electrical carriers in the millimeter wave and THz range and realization options in integrated optics and nanophotonics are discussed
- …