Simulation of a high voltage gain dc-dc converter integrating with coupled inductor and two voltage multiplier cells

In this paper, a high voltage gain dc-dc converter is presented for renewable energy applications. This paper develops step up converter which consists of two voltage multiplier cells with coupled inductor in order to achieve the multiple voltage requirements with high voltage gain. And also two capacitances are provided for charging when the device is under turned-off condition, by utilizing the stored energy levels in the coupled inductor which can enhances the voltage transfer capability levels of the system The voltage imbalance levels are compensated at main power switch. The implemented model operates with low resistance RDS(ON) at main power switch which can reduce the switching losses. The developed simulink models are tested and verified within the MATLAB/SIMULINK with multiple output functions with high voltage gains

Optimal Controller Design and Dynamic Performance Enhancement of High Step-up Non-Isolated DC-DC Converter for Electric Vehicle Charging Applications

Ideally, traditional boost converters can achieve a high conversion ratio with a high-duty cycle. But, in regular practice, due to low conversion efficiency, RR reverse-recovery, and EMI (electromagnetic interference) problems, the high voltage gain cannot be performed, whereas CIBC (coupled inductor-based converters) can achieve high voltage gain by re-adjusting the turn ratios. Even though the leakage inductor of the CI (coupled inductor) makes some problems like voltage spikes on the main connectivity switch, high power dissipation, and voltage pressure can be minimized by voltage clamp. In this paper, a non-isolated DC-DC converter with high voltage gain is demonstrated with 3 diodes, 3 capacitors, 1-inductor, and a coupled inductor. The main inductor is connected to the input to decrease the current ripple. The voltage stress at main switch S is shared by diode D1 and capacitor C1 and the main switch is turned ON under zero current, hence it turns to low switching losses. This paper proposes two controllers like proportional-integral (PI) controller and fuzzy logic (FLC) for dc-dc converter. Furthermore, it demonstrates the operation, design, mathematical analysis, and performance of DC-DC converter using controllers for efficient operation of the system is performed using simulations in MATLAB 2012b

PV Systems based High Gain Converter using CI and SCC Techniques

In this paper, new techniques of a CI and SCC-based step-up higher-level voltage DC_DC converter were implemented. The CI and SC charging and discharging the energy respectively to attain higher gain. The stress in switching volt level and inductance leakage is detached using the clamp circuitry. The reversed retrieval problem in the diode was eradicated with the help of Coupled Inductor (CI). The new topology to get more gain of the voltage and improved efficiency. The steady state analysis with the operation procedures of novel DC_DC converter is discussed here. In proposed model, input voltage is 24V & Vo is 410V, Pmax is 150W was given to get ηmaximum of 96.4%

Integrated fuzzy and phase shift controller for output step voltage control in multilevel inverter with reduced switch count

A modified multilevel inverter with a configurable level generation is proposed in this paper. The MLI is composed of a modified boost converter at the front end followed by a level generation circuit and a H-bridge configuration. The front-end converter is biased with a PV source with a Hybrid boost resonant converter. The switches are triggered out of phase through a MPP tracker which uses Fractional INC MPPT. The secondary side of the circuit is composed of a derived voltage doubler along with the voltage regulator. The output of the doubler is regulated through a level converter which integrates a fuzzy controller and a phase shift controller. The modified multilevel inverter uses a low-voltage PV source as input and generates a variable-step multilevel output voltage with lower harmonic distortion and it is suitable for low-power PV applications

Investigation on extendable multiport DC–DC boost converter for hybrid renewable energy systems

In this work, the integration of renewable hybrid energy (RHE) resources using extendable multiport DC–DC boost converter is investigated. Three renewable energy sources such as solar photovoltaic (PV) system, wind energy system and fuel cell (FC) are integrated into the grid via this converter and grid-tied inverter. The output voltage of the multiport DC–DC boost converter is controlled using adaptive neuro fuzzy inference system-based controller. The overall system model is developed and tested in the MATLAB simulation software and also implemented in real time. The overall system is tested for different operating conditions such as change in irradiance condition of the solar PV panel, change in wind speed condition of the wind turbine, change in hydrogen pressure conditions of the FC and sudden change in load conditions and corresponding results are measured and analysed. The efficiency of the proposed system is about 98.21%. Finally, experimental results of the proposed model are also presented to examine the suitability of the system

Generalized, Complete and Accurate Modeling of Non-Ideal Push–Pull Converters for Power System Analysis and Control

Power converters are a basic element for the control and design of any power electronic system. Among the many available topologies, the push–pull converter is widely used due to its versatility, safety and efficiency. For its correct analysis, sizing, simulation and control, models that meet the characteristics of generality, accuracy and simplicity are required, especially if its control is to be optimized by means of some analytical technique. This requires models that consider the practical non-idealities intrinsic to the converter, as well as being intuitive and easy to handle analytically in a control loop. In general, the models reviewed in the scientific literature adopt simplifications in their definition that are detrimental to their accuracy. In response to the posed problem, this work presents a generalized, complete, accurate and versatile model of real (non-ideal) push–pull converters, ideal for the analysis, simulation, and control of power systems. Following the premise of general and complete converters, the proposed model includes all the practical non-idealities of the converter elements, and it is accurate because it faithfully reflects its dynamics. Furthermore, the model is versatile, as its state space formulation allows for its easy adaptability to the converter operating conditions (voltage, current and temperature) for each sampling time. Also, the model is excellent for use in model-based control techniques, as well as for making very accurate simulators. The behavior of the developed model has been contrasted with a real push–pull converter, as well as with reference models present in the scientific literature for both dynamic and steady-state response tests. The results show excellent performance in all the studied cases, with behavior faithful to the real converter and with relative errors that are much lower than those obtained for the reference models. It follows that the model behaves like a digital twin of a real push–pull converter.This work is a contribution of the two following projects: “H2Integration&Control. Integration and Control of a hydrogen-based pilot plant in residential applications for energy supply”, Ref. PID2020-116616RB-C31 supported by the Spanish State Program of R+D+I Oriented to the Challenges of Society; and “SALTES: Smartgrid with reconfigurable Architecture for testing controL Techniques and Energy Storage priority contaminant waste”, Ref. P20-00730 supported by Andalusian Regional Program of R+D+I

High step up DC-DC converter topology for PV systems and electric vehicles

This thesis presents new high step-up DC-DC converters for photovoltaic and electric vehicle applications. An asymmetric flyback-forward DC-DC converter is proposed for the PV system controlled by the MPPT algorithm. The second converter is a modular switched-capacitor DC-DC converter, it has the capability to operate with transistor and capacitor open-circuit faults in every module. The results from simulations and tests of the asymmetric DC-DC converters have suggested that the proposed converter has a 5% to 10% voltage gain ratio increased to the symmetric structures among 100W – 300W power (such as [3]) range while maintaining efficiency of 89%-93% when input voltage is in the range of 25 – 30 V. they also indicated that the softswitching technique has been achieved, which significantly reduce the power loss by 1.7%, which exceeds the same topology of the proposed converter without the softswitching technique. Moreover, the converters can maintain rated outputs under main transistor open circuit fault situation or capacitor open circuit faults. The simulation and test results of the proposed modularized switched-capacitor DC-DC converters indicate that the proposed converter has the potential of extension, it can be embedded with infinite module in simulation results, however, during experiment. The sign open circuit fault to the transistors and capacitors would have low impact to the proposed converters, only the current ripple on the input source would increase around 25% for 4-module switched-capacitor DC-DC converters. The developed converters can be applied to many applications where DC-DC voltage conversion is alighted. In addition to PVs and EVs. Since they can ride through some electrical faults in the devices, the developed converter will have economic implications to improve the system efficiency and reliability

Development of novel non-isolated unidirectional DCDC multistage power converter configurations for renewable energy applications- hardware implementation and investigation studies

Abstract: In the last decades, there is a rapid development towards new energy sources due to the increasing demand of energy and cost of the fossil fuels. Renewable energy sources getting more popular day by day due to government support and carbon dioxide (CO2) emission reduction policy to reduce greenhouse gas emissions. Photovoltaic energy generation is the excellent example of energy generation through various serious parallel arrangement of a small voltage generating cells or modules. There are directly use of synchronous generators to transfer power to grid from hydro energy plant, geothermal energy plant, bio-fuel energy plants. However, the photovoltaic energy generation systems requires the power electronic converters system to satisfy the demand of realtime application or electric grid. Therefore, for real-time applications or before feeding energy to the grid via inverter, photovoltaic systems linked with DC-DC converters, which have high-voltage conversion ratio capability. Thus, DC-DC power converter is the paramount constituent in the photovoltaic power conversion stage. This research work carried out in focusing on hardware implementation and investigation studies of novel non-isolated unidirectional DC-DC multistage power converter configurations for renewable energy application. The comprehensive review of various unidirectional non-isolated DC-DC multistage power converters are presented and it is found that not all of them have the capability to convert low voltage into high voltage, thus not suitable for photovoltaic energy applications. It is investigated that there is a scope to design new DC-DC multistage power converter topologies configurations with high voltage conversion ratio by employing a new arrangement of reactive elements and semiconductor devices. A new breed of DC-DC multistage power converters called “X-Y converter family” proposed for photovoltaic application by utilizing the switchedinductor, the switched capacitor, the voltage lift switch capacitor and modified voltage lift switched capacitor, voltage doubler and multiplier boosting techniques. The derivation of voltage conversion ratio, advantage of each converter of X-Y family and hierarchy of X-Y family is discussed. The research work also proposed a new DC-DC multistage power converter without a magnetic component for photovoltaic application by utilizing the concept of switched capacitors. An original Transformer and Switched Capacitor (T-SC) based multistage power converter proposed for high-voltage/lowcurrent photovoltaic applications by combining the feature of the boost converter, transformer and switched capacitor. New Nx IMBC (Nx Interleaved Multilevel Boost Converter) or Cockcroft Walton (CW) Voltage Multiplier based Multistage/Multilevel Power Converter (CW-VM-MPC) converter topologies are presented to achieve maximum voltage conversion ratio by utilizing the feature of Cockcroft Walton (CW) voltage multiplier. Moreover, the proposed multistage power converter compared with each other as well as recently proposed multistage power converters in term of voltage conversion ratio, number of devices and costs.D.Eng. (Electrical and Electronic Engineering