Improvement of range-free localization technology by a novel DV-hop protocol in wireless sensor networks

International audienceLocalization is a fundamental issue for many applications in wireless sensor networks. Without the need of additional ranging devices, the range-free localization technology is a cost-effective solution for low-cost indoor and outdoor wireless sensor networks. Among range-free algorithms, DV-hop (Distance Vector - hop) has the advantage to localize the mobile nodes which has less than three neighbour anchors. Based on the original DV-hop algorithm, this paper presents two improved algorithms (Checkout DV-hop and Selective 3-Anchor DV-hop). Checkout DV-hop algorithm estimates the mobile node position by using the nearest anchor, while Selective 3-Anchor DV-hop algorithm chooses the best 3 anchors to improve localization accuracy. Then, in order to implement these DV-hop based algorithms in network scenarios, a novel DV-hop localization protocol is proposed. This new protocol is presented in detail in this paper, including the format of data payloads, the improved collision reduction method E-CSMA/CA, as well as parameters used in deciding the end of each DV-hop step. Finally, using our localization protocol, we investigate the performance of typical DV-hop based algorithms in terms of localization accuracy, mobility, synchronization and overhead. Simulation results prove that Selective 3-Anchor DV-hop algorithm offers the best performance compared to Checkout DV-hop and the original DV-hop algorithm

A survey of localization in wireless sensor network

Localization is one of the key techniques in wireless sensor network. The location estimation methods can be classified into target/source localization and node self-localization. In target localization, we mainly introduce the energy-based method. Then we investigate the node self-localization methods. Since the widespread adoption of the wireless sensor network, the localization methods are different in various applications. And there are several challenges in some special scenarios. In this paper, we present a comprehensive survey of these challenges: localization in non-line-of-sight, node selection criteria for localization in energy-constrained network, scheduling the sensor node to optimize the tradeoff between localization performance and energy consumption, cooperative node localization, and localization algorithm in heterogeneous network. Finally, we introduce the evaluation criteria for localization in wireless sensor network

Reference Nodes Selection for Anchor-Free Localization in Wireless Sensor Networks

Dizertační práce se zabývá návrhem nového bezkotevního lokalizačního algoritmu sloužícího pro výpočet pozice uzlů v bezdrátových senzorových sítích. Provedené studie ukázaly, že dosavadní bezkotevní lokalizační algoritmy, pracující v paralelním režimu, dosahují malých lokalizačních chyb. Jejich nevýhodou ovšem je, že při sestavení množiny referenčních uzlu spotřebovávají daleko větší množství energie než algoritmy pracující v inkrementálním režimu. Paralelní lokalizační algoritmy využívají pro určení pozice referenční uzly nacházející se na protilehlých hranách bezdrátové sítě. Nový lokalizační algoritmus označený jako BRL (Boundary Recognition aided Localization) je založen na myšlence decentralizovaně detekovat uzly ležící na hranici síti a pouze z této množiny vybrat potřebný počet referenčních uzlu. Pomocí navrženého přístupu lze znažně snížit množství energie spotřebované v průběhu procesu výběru referenčních uzlů v senzorovém poli. Dalším přínosem ke snížení energetických nároku a zároveň zachování nízké lokalizační chyby je využití procesu multilaterace se třemi, eventuálně čtyřmi referenčními body. V rámci práce byly provedeny simulace několika dílčích algoritmu a jejich funkčnost byla ověřena experimentálně v reálné senzorové síti. Navržený algoritmus BRL byl porovnán z hlediska lokalizační chyby a počtu zpracovaných paketů s několika známými lokalizačními algoritmy. Výsledky simulací dokázaly, že navržený algoritmus představuje efektivní řešení pro přesnou a zároveň nízkoenergetickou lokalizaci uzlů v bezdrátových senzorových sítích.The doctoral thesis is focused on a design of a novel anchor free localization algorithm for wireless sensor networks. As introduction, the incremental and concurrent anchor free localization algorithms are presented and their performance is compared. It was found that contemporary anchor free localization algorithms working in the concurrent manner achieve a low localization error, but dissipate signicant energy reserves. A new Boundary Recognition Aided Localization algorithm presented in this thesis is based on an idea to recognize the nodes placed on the boundary of network and thus reduce the number of transmission realized during the reference nodes selection phase of the algorithm. For the position estimation, the algorithm employs the multilateration technique that work eectively with the low number of the reference nodes. Proposed algorithms are tested through the simulations and validated by the real experiment with the wireless sensor network. The novel Boundary Recognition Aided Localization algorithm is compared with the known algorithms in terms of localization error and the communication cost. The results show that the novel algorithm presents powerful solution for the anchor free localization.

Optimized range-free localization scheme using autonomous groups particles swarm optimization for anisotropic wireless sensor networks

Location information is a required concern for localization-based service application in the field of wireless sensor networks (WSNs). Distance Vector-Hop (DV-Hop) algorithm as the most typical range-free localization scheme is more suitable for large-scaled WSNs. Its localization performance is good in even distributed networks. However, it demonstrated extremely poor accuracy under anisotropic networks, which is an urgent problem that need to be addressed. Accordingly, an optimized DV-Hop localization algorithm is put forward in this study with considering several anisotropic factors. Accumulated hop size error and collinearity are two main reasons that led to low accuracy and poor stability. Hence, hop size error of anchors is reduced by introducing distance gap based on anchors. Besides, weighted least square method is adopted to replace the least square method to against anisotropic factors caused by irregular radio patterns. Moreover, an Autonomous Groups Particles Swarm Optimization (AGPSO) is employed to further optimize the obtained coordinate in the first round. It developed a novel method to determine localization coverage. The localization coverage is also added to be one evaluation metric in our study, which makes up for the lack of this evaluation indicator in most of the studies. Simulation results display good localization accuracy and strong stability under anisotropic networks. In addition, it also concluded that metaheuristic optimization algorithm and weighted least square method are more suitable to conquer anisotropic factor. It briefly points out a new direction for the future research work in the localization area under anisotropic networks

Sparse Localization with a Mobile Beacon Based on LU Decomposition in Wireless Sensor Networks

Node localization is the core in wireless sensor network. It can be solved by powerful beacons, which are equipped with global positioning system devices to know their location information. In this article, we present a novel sparse localization approach with a mobile beacon based on LU decomposition. Our scheme firstly translates node localization problem into a 1-sparse vector recovery problem by establishing sparse localization model. Then, LU decomposition pre-processing is adopted to solve the problem that measurement matrix does not meet the re¬stricted isometry property. Later, the 1-sparse vector can be exactly recovered by compressive sensing. Finally, as the 1-sparse vector is approximate sparse, weighted Cen¬troid scheme is introduced to accurately locate the node. Simulation and analysis show that our scheme has better localization performance and lower requirement for the mobile beacon than MAP+GC, MAP-M, and MAP-M&N schemes. In addition, the obstacles and DOI have little effect on the novel scheme, and it has great localization performance under low SNR, thus, the scheme proposed is robust

Distributed Recognition of Reference Nodes for Wireless Sensor Network Localization

All known localization techniques for wireless sensor and ad-hoc networks require certain set of reference nodes being used for position estimation. The anchor-free techniques in contrast to anchor-based do not require reference nodes called anchors to be placed in the network area before localization operation itself, but they can establish own reference coordinate system to be used for the relative position estimation. We observed that contemporary anchor-free localization algorithms achieve a low localization error, but dissipate significant energy reserves during the recognition of reference nodes used for the position estimation. Therefore, we have proposed the optimized anchor-free localization algorithm referred to as BRL (Boundary Recognition aided Localization), which achieves a low localization error and mainly reduces the communication cost of the reference nodes recognition phase. The proposed BRL algorithm was investigated throughout the extensive simulations on the database of networks with the different number of nodes and densities and was compared in terms of communication cost and localization error with the known related algorithms such as AFL and CRP. Through the extensive simulations we have observed network conditions where novel BRL algorithm excels in comparison with the state of art

Locating sensors with fuzzy logic algorithms

In a system formed by hundreds of sensors deployed in a huge area it is important to know the position where every sensor is. This information can be obtained using several methods. However, if the number of sensors is high and the deployment is based on ad-hoc manner, some auto-locating techniques must be implemented. In this paper we describe a novel algorithm based on fuzzy logic with the objective of estimating the location of sensors according to the knowledge of the position of some reference nodes. This algorithm, called LIS (Localization based on Intelligent Sensors) is executed distributively along a wireless sensor network formed by hundreds of nodes, covering a huge area. The evaluation of LIS is led by simulation tests. The result obtained shows that LIS is a promising method that can easily solve the problem of knowing where the sensors are located.Junta de Andalucía P07-TIC-0247