Fixed-Parameter Algorithms for Rectilinear Steiner tree and Rectilinear Traveling Salesman Problem in the plane

Given a set $P$ of $n$ points with their pairwise distances, the traveling salesman problem (TSP) asks for a shortest tour that visits each point exactly once. A TSP instance is rectilinear when the points lie in the plane and the distance considered between two points is the $l_1$ distance. In this paper, a fixed-parameter algorithm for the Rectilinear TSP is presented and relies on techniques for solving TSP on bounded-treewidth graphs. It proves that the problem can be solved in $O\left(nh7^h\right)$ where $h \leq n$ denotes the number of horizontal lines containing the points of $P$. The same technique can be directly applied to the problem of finding a shortest rectilinear Steiner tree that interconnects the points of $P$ providing a $O\left(nh5^h\right)$ time complexity. Both bounds improve over the best time bounds known for these problems.Comment: 24 pages, 13 figures, 6 table

Netlist Decomposition and Candidate Generation for Analog IC Routing

Netlist decomposition and candidate generation is a non-conventional approach in the routing stage of the place and route (PnR) flow. While there has been significant research and advancement in the digital domain for automation with respect to this as well as other techniques, very little work has been done in the analog domain due to its complex constraints and specific requirements. With this proposed method, the most common requirements of Analog circuits are taken into consideration to provide candidate routes for netlists of analog Integrated Chips (IC). Netlist decomposition is an important stage of breaking down multi-pin nets into two-pin nets by adding additional nodes for each net. The proposed method takes into account blockages and constraints such as symmetry and bends to develop a new algorithm using Steiner trees and Hanan grids to generate optimal Steiner points. This method also breaks down multi-pin nets to 3-pin nets which reduces the wirelength and computations significantly. The decomposed net segments are run through Dijkstra algorithm to generate multiple candidates and an Integer Linear programming (ILP) solver is used to pick the best candidates that follow all the constraints and design rules. The experimental results show that overall wirelength is reduced by 5.16% while using 3-pin net decomposition when compared to 2-pin net decomposition. There is also a reduction in the number of metal layers used and the number of Steiner points generated. The method shows lesser computations when compared to other decomposition techniques as it avoids multiple reroutes to obtain Design Rule Check (DRC) clean routes

Netlist Decomposition and Candidate Generation for Analog IC Routing

Netlist decomposition and candidate generation is a non-conventional approach in the routing stage of the place and route (PnR) flow. While there has been significant research and advancement in the digital domain for automation with respect to this as well as other techniques, very little work has been done in the analog domain due to its complex constraints and specific requirements. With this proposed method, the most common requirements of Analog circuits are taken into consideration to provide candidate routes for netlists of analog Integrated Chips (IC). Netlist decomposition is an important stage of breaking down multi-pin nets into two-pin nets by adding additional nodes for each net. The proposed method takes into account blockages and constraints such as symmetry and bends to develop a new algorithm using Steiner trees and Hanan grids to generate optimal Steiner points. This method also breaks down multi-pin nets to 3-pin nets which reduces the wirelength and computations significantly. The decomposed net segments are run through Dijkstra algorithm to generate multiple candidates and an Integer Linear programming (ILP) solver is used to pick the best candidates that follow all the constraints and design rules. The experimental results show that overall wirelength is reduced by 5.16% while using 3-pin net decomposition when compared to 2-pin net decomposition. There is also a reduction in the number of metal layers used and the number of Steiner points generated. The method shows lesser computations when compared to other decomposition techniques as it avoids multiple reroutes to obtain Design Rule Check (DRC) clean routes

Standard Transistor Array (STAR). Volume 1: Placement technique

A large scale integration (LSI) technology, the standard transistor array uses a prefabricated understructure of transistors and a comprehensive library of digital logic cells to allow efficient fabrication of semicustom digital LSI circuits. The cell placement technique for this technology involves formation of a one dimensional cell layout and "folding" of the one dimensional placement onto the chip. It was found that, by use of various folding methods, high quality chip layouts can be achieved. Methods developed to measure of the "goodness" of the generated placements include efficient means for estimating channel usage requirements and for via counting. The placement and rating techniques were incorporated into a placement program (CAPSTAR). By means of repetitive use of the folding methods and simple placement improvement strategies, this program provides near optimum placements in a reasonable amount of time. The program was tested on several typical LSI circuits to provide performance comparisons both with respect to input parameters and with respect to the performance of other placement techniques. The results of this testing indicate that near optimum placements can be achieved by use of the procedures incurring severe time penalties

Using ant colony optimization for routing in microprocesors

Power consumption is an important constraint on VLSI systems. With the advancement in technology, it is now possible to pack a large range of functionalities into VLSI devices. Hence it is important to find out ways to utilize these functionalities with optimized power consumption. This work focuses on curbing power consumption at the design stage. This work emphasizes minimizing active power consumption by minimizing the load capacitance of the chip. Capacitance of wires and vias can be minimized using Ant Colony Optimization (ACO) algorithms. ACO provides a multi agent framework for combinatorial optimization problems and hence is used to handle multiple constraints of minimizing wire-length and vias to achieve the goal of minimizing capacitance and hence power consumption. The ACO developed here is able to achieve an 8% reduction of wire-length and 7% reduction in vias thereby providing a 7% reduction in total capacitance, compared to other state of the art routers

An Improved Augmented Line Segment based Algorithm for the Generation of Rectilinear Steiner Minimum Tree

An improved Augmented Line Segment Based (ALSB) algorithm for the construction of Rectilinear Steiner Minimum Tree using augmented line segments is proposed. The proposed algorithm works by incrementally increasing the length of line segments drawn from all the points in four directions. The edges are incrementally added to the tree when two line segments intersect. The reduction in cost is obtained by postponing the addition of the edge into the tree when both the edges (upper and lower L-shaped layouts) are of same length or there is no overlap. The improvement is focused on reduction of the cost of the tree and the number of times the line segments are augmented. Instead of increasing the length of line segments by 1, the line segments length are doubled each time until they cross the intersection point between them. The proposed algorithm reduces the wire length and produces good reduction in the number of times the line segments are incremented. Rectilinear Steiner Minimum Tree has the main application in the global routing phase of VLSI design. The proposed improved ALSB algorithm efficiently constructs RSMT for the set of circuits in IBM benchmark

Shortest Paths and Steiner Trees in VLSI Routing

Routing is one of the major steps in very-large-scale integration (VLSI) design. Its task is to find disjoint wire connections between sets of points on a chip, subject to numerous constraints. This problem is solved in a two-stage approach, which consists of so-called global and detailed routing steps. For each set of metal components to be connected, global routing reduces the search space by computing corridors in which detailed routing sequentially determines the desired connections as shortest paths. In this thesis, we present new theoretical results on Steiner trees and shortest paths, the two main mathematical concepts in routing. In the practical part, we give computational results of BonnRoute, a VLSI routing tool developed at the Research Institute for Discrete Mathematics at the University of Bonn. Interconnect signal delays are becoming increasingly important in modern chip designs. Therefore, the length of paths or direct delay measures should be taken into account when constructing rectilinear Steiner trees. We consider the problem of finding a rectilinear Steiner minimum tree (RSMT) that --- as a secondary objective --- minimizes a signal delay related objective. Given a source we derive some structural properties of RSMTs for which the weighted sum of path lengths from the source to the other terminals is minimized. Also, we present an exact algorithm for constructing RSMTs with weighted sum of path lengths as secondary objective, and a heuristic for various secondary objectives. Computational results for industrial designs are presented. We further consider the problem of finding a shortest rectilinear Steiner tree in the plane in the presence of rectilinear obstacles. The Steiner tree is allowed to run over obstacles; however, if it intersects an obstacle, then no connected component of the induced subtree must be longer than a given fixed length. This kind of length restriction is motivated by its application in VLSI routing where a large Steiner tree requires the insertion of repeaters which must not be placed on top of obstacles. We show that there are optimal length-restricted Steiner trees with a special structure. In particular, we prove that a certain graph (called augmented Hanan grid) always contains an optimal solution. Based on this structural result, we give an approximation scheme for the special case that all obstacles are of rectangular shape or are represented by at most a constant number of edges. Turning to the shortest paths problem, we present a new generic framework for Dijkstra's algorithm for finding shortest paths in digraphs with non-negative integral edge lengths. Instead of labeling individual vertices, we label subgraphs which partition the given graph. Much better running times can be achieved if the number of involved subgraphs is small compared to the order of the original graph and the shortest path problems restricted to these subgraphs is computationally easy. As an application we consider the VLSI routing problem, where we need to find millions of shortest paths in partial grid graphs with billions of vertices. Here, the algorithm can be applied twice, once in a coarse abstraction (where the labeled subgraphs are rectangles), and once in a detailed model (where the labeled subgraphs are intervals). Using the result of the first algorithm to speed up the second one via goal-oriented techniques leads to considerably reduced running time. We illustrate this with the routing program BonnRoute on leading-edge industrial chips. Finally, we present computational results of BonnRoute obtained on real-world VLSI chips. BonnRoute fulfills all requirements of modern VLSI routing and has been used by IBM and its customers over many years to produce more than one thousand different chips. To demonstrate the strength of BonnRoute as a state-of-the-art industrial routing tool, we show that it performs excellently on all traditional quality measures such as wire length and number of vias, but also on further criteria of equal importance in the every-day work of the designer

An integrated placement and routing approach

As the feature size continues scaling down, interconnects become the major contributor of signal delay. Since interconnects are mainly determined by placement and routing, these two stages play key roles to achieve high performance. Historically, they are divided into two separate stages to make the problem tractable. Therefore, the routing information is not available during the placement process. Net models such as HPWL, are employed to approximate the routing to simplify the placement problem. However, the good placement in terms of these objectives may not be routable at all in the routing stage because different objectives are optimized in placement and routing stages. This inconsistancy makes the results obtained by the two-step optimization method far from optimal;In order to achieve high-quality placement solution and ensure the following routing, we propose an integrated placement and routing approach. In this approach, we integrate placement and routing into the same framework so that the objective optimized in placement is the same as that in routing. Since both placement and routing are very hard problems (NP-hard), we need to have very efficient algorithms so that integrating them together will not lead to intractable complexity;In this dissertation, we first develop a highly efficient placer - FastPlace 3.0 for large-scale mixed-size placement problem. Then, an efficient and effective detailed placer - FastDP is proposed to improve global placement by moving standard cells in designs. For high-degree nets in designs, we propose a novel performance-driven topology design algorithm to generate good topologies to achieve very strict timing requirement. In the routing phase, we develop two global routers, FastRoute and FastRoute 2.0. Compared to traditional global routers, they can generate better solutions and are two orders of magnitude faster. Finally, based on these efficient and high-quality placement and routing algorithms, we propose a new flow which integrates placement and routing together closely. In this flow, global routing is extensively applied to obtain the interconnect information and direct the placement process. In this way, we can get very good placement solutions with guaranteed routability