Review On Controller Design In Pneumatic Actuator Drive System

A pneumatic actuator is a device that converts compressed air into mechanical energy to perform varieties of work. It exhibits high nonlinearities due to high friction forces, compressibility of air and dead band of the spool movement which is difficult to manage and requires an appropriate controller for better performance. The purpose of this study is to review the controller design of pneumatic actuator recommended by previous researchers from the past years. Initially, the basic views of the pneumatic will be presented in terms of introduction to the pneumatic actuator and its applications in industries. At the end of this review, discussions on the design of the controllers will be concluded and further research will be proposed along with the improvement of control strategies in the pneumatic actuator systems

Advances in Reinforcement Learning

Reinforcement Learning (RL) is a very dynamic area in terms of theory and application. This book brings together many different aspects of the current research on several fields associated to RL which has been growing rapidly, producing a wide variety of learning algorithms for different applications. Based on 24 Chapters, it covers a very broad variety of topics in RL and their application in autonomous systems. A set of chapters in this book provide a general overview of RL while other chapters focus mostly on the applications of RL paradigms: Game Theory, Multi-Agent Theory, Robotic, Networking Technologies, Vehicular Navigation, Medicine and Industrial Logistic

A Review of Pneumatic Actuators Used for the Design of Medical Simulators and Medical Tools

International audienc

Development of a Self-Learning Approach Applied to Pattern Recognition and Fuzzy Control

Systeme auf Basis von Fuzzy-Regeln sind in der Entwicklung der Mustererkennung und Steuersystemen weit verbreitet verwendet. Die meisten aktuellen Methoden des Designs der Fuzzy-Regel-basierte Systeme leiden unter folgenden Problemen 1. Das Verfahren der Fuzzifizierung berücksichtigt weder die statistischen Eigenschaften noch reale Verteilung der betrachteten Daten / Signale nicht. Daher sind die generierten Fuzzy- Zugehörigkeitsfunktionen nicht wirklich in der Lage, diese Daten zu äußern. Darüber hinaus wird der Prozess der Fuzzifizierung manuell definiert. 2. Die ursprüngliche Größe der Regelbasis ist pauschal bestimmt. Diese Feststellung bedeutet, dass dieses Verfahren eine Redundanz in den verwendeten Regeln produzieren kann. Somit wird diese Redundanz zum Auftreten der Probleme von Komplexität und Dimensionalität führen. Der Prozess der Vermeidung dieser Probleme durch das Auswahlverfahren der einschlägigen Regeln kann zum Rechenaufwandsproblem führen. 3. Die Form der Fuzzy-Regel leidet unter dem Problem des Verlusts von Informationen, was wiederum zur Zuschreibung diesen betrachteten Variablen anderen unrealen Bereich führen kann. 4. Ferner wird die Anpassung der Fuzzy- Zugehörigkeitsfunktionen mit den Problemen von Komplexität und Rechenaufwand, wegen der damit verbundenen Iteration und mehrerer Parameter, zugeordnet. Auch wird diese Anpassung im Bereich jeder einzelner Regel realisiert; das heißt, der Anpassungsprozess im Bereich der gesamten Fuzzy-Regelbasis wird nicht durchgeführt

Component-based mixed reality environment for the control and design of servo-pneumatic system

Synopsis Considerable research efforts have been spent over the last two decades on improving the design, control, and modelling of pneumatic servo drive systems including the development of dedicated controllers and control valves. However, the commercial updates in employing pneumatic servos are still largely limited to laboratory research usage and the initiatives in developing seem to have lost their momentums. Although this situation has some to do with the rapid development and availability of cost effective electric servo technologies, one reason is considered to be a lack of design and simulation tools for employing pneumatic servo drives. This research has therefore been conducted to address these concerns, and to demonstrate how appropriate tools and environments can be developed and used to aid in the design, control and commissioning of pneumatic servo drives. Because of the inherent high nonlinearities associated with pneumatic systems, it would be highly desirable if the simulation environment could be run in time domain so that it can be mixed with the real system. This would make the simulation more accurate and reliable especially when dealing with such nonlinear systems. Unfortunately, the tools that are available in the market such as Propneu (Festo, 2005) and Hypneu (Bardyne, 2006) are dedicated for pneumatic circuit design only. This research is aimed at developing a mixed reality environment for the control and design of servo-pneumatic systems. Working with a mixed reality environment would include both the capability to model the system entirely as a simulation, the so-called "off-line", as well as being able to use real components running against simulations of others "on-line", or in a Mixed Reality (MR) manner. Component-based paradigm has been adopted, and hence the entire pneumatic system is viewed as a series of component modules with standardised linking variables. The mathematical model of each individual component has been implemented in simulation software which produces time domain responses in order to allow for mixing the simulation with the real system. The main outcome of this research can be seen as a successful development and demonstration of the Component-based Mixed Reality Environment (CMRE), which would facilitate the control and design of servo-pneumatic systems. On the one hand, the CMRE facilitates the identification of some nonlinear parameters such as frictional \I ynopsis parameters. These parameters could cause great difficulties in servo-pneumatic modelling and control. Accurate friction parameters would give the ability to attain an accurate model, and therefore provide more flexibility in applying different control and tuning strategies on the real system. On the other hand, the CMRE facilitates the design process by enabling the designer to evaluate the servo-pneumatic system off-line prior to building the system. This would reduce the design time, increase the reliability of the design, and minimize the design cost. The concept of the CMRE was validated by tests carried out on laboratory-based prototype servo-drive. Close agreement between the experimental and simulated responses was obtained showing that the models have represented the real system adequately. Case studies were then conducted to demonstrate the validity of the proposed methodology and environment. In these case studies, PIDVF controller and cascade control structure were successfully implemented, synthesised, and tuned. The results revealed that the CMRE is an easy, accurate and robust way of implementing different control and tuning strategies on servo-pneumatic systems. Furthermore, the research has shown how the CMRE can lead to significant improvements in certain life cycle phases of the system, e.g. commissioning, maintenance, etc. This research has contributed to knowledge in the following: (1) Adopting the mixed reality concept and the component-based approach in order to create a CMRE in facilitating the control and design of servo-pneumatic systems. (2) A method to identify the friction parameters of a single-axis pneumatic machine, (3) Encapsulate existing control methods within the CMRE to be applied on the real system. (4) A scheme for controller tuning, in which the controller is tuned off-line and then applied on the real system, and hence avoided on-line tuning which can be troublesome and time consuming. It is anticipated that the concept of the CMRE can be extended to include multi-axes servo-pneumatic system, servo-hydraulic, and servo-electric drives. Therefore, conceptual model structures have been introduced in this research which can be considered as the foundation for creating similar environments for those systems

Modeling and control of a pneumatic muscle actuator

This thesis presents the theoretical and experimental study of pneumatic servo position control systems based on pneumatic muscle actuators (PMAs). Pneumatic muscle is a novel type of actuator which has been developed to address the control and compliance issues of conventional cylindrical actuators. Compared to industrial pneumatic cylinders, muscle actuators have many ideal properties for robotic applications providing an interesting alternative for many advanced applications. However, the disadvantage is that muscle actuators are highly nonlinear making accurate control a real challenge. Traditionally, servo-pneumatic systems use relatively expensive servo or proportional valve for controlling the mass flow rate of the actuator. This has inspired the research of using on/off valves instead of servo valves providing a low-cost option for servo-pneumatic systems. A pulse width modulation (PWM) technique, where the mass flow is provided in discrete packets of air, enables the use of similar control approaches as with servo valves. Although, the on/off valve based servo-pneumatics has shown its potential, it still lacks of analytical methods for control design and system analysis. In addition, the literature still lacks of studies where the performance characteristics of on/off valve controlled pneumatic systems are clearly compared with servo valve approaches. The focus of this thesis has been on modeling and control of the pneumatic muscle actuator with PWM on/off valves. First, the modeling of pneumatic muscle actuator system controlled by a single on/off valve is presented. The majority of the effort focused on the modeling of muscle actuator nonlinear force characteristics and valve mass flow rate modeling. A novel force model was developed and valve flow model for both simulation and control design were identified and presented. The derived system models (linear and nonlinear), were used for both control design and utilized also in simulation based system analysis. Due to highly nonlinear characteristics and uncertainties of the system, a sliding mode control (SMC) was chosen for a control law. SMC strategy has been proven to be an efficient and robust control strategy for highly nonlinear pneumatic actuator applications. Different variations of sliding mode control, SMC with linear model (SMCL) and nonlinear model (SMCNL) as well as SMC with integral sliding surface (SMCI) were compared with a traditional proportional plus velocity plus acceleration control with feed-forward (PVA+FF) compensation. Also, the effects of PWM frequency on the system performance were studied. Different valve configurations, single 3/2, dual 2/2, and servo valve, for controlling a single muscle actuator system were studied. System models for each case were formulated in a manner to have a direct comparison of the configuration and enabling the use of same sliding mode control design. The analysis of performance included the sinusoidal tracking precision and robustness to parameter variations and external disturbances. In a similar manner, a comparison of muscle actuators in an opposing pair configuration controlled by four 2/2 valves and servo valve was executed. Finally, a comparison of a position servo realized with pneumatic muscle actuators to the one realized with traditional cylinder was presented. In these cases, servo valve with SMC and SMCI were used to control the systems. The analysis of performance included steady-state error in point-to-point positioning, the RMSE of sinusoidal tracking precision, and robustness to parameter variations

Modeling and control of a pneumatic muscle actuator

This thesis presents the theoretical and experimental study of pneumatic servo position control systems based on pneumatic muscle actuators (PMAs). Pneumatic muscle is a novel type of actuator which has been developed to address the control and compliance issues of conventional cylindrical actuators. Compared to industrial pneumatic cylinders, muscle actuators have many ideal properties for robotic applications providing an interesting alternative for many advanced applications. However, the disadvantage is that muscle actuators are highly nonlinear making accurate control a real challenge. Traditionally, servo-pneumatic systems use relatively expensive servo or proportional valve for controlling the mass flow rate of the actuator. This has inspired the research of using on/off valves instead of servo valves providing a low-cost option for servo-pneumatic systems. A pulse width modulation (PWM) technique, where the mass flow is provided in discrete packets of air, enables the use of similar control approaches as with servo valves. Although, the on/off valve based servo-pneumatics has shown its potential, it still lacks of analytical methods for control design and system analysis. In addition, the literature still lacks of studies where the performance characteristics of on/off valve controlled pneumatic systems are clearly compared with servo valve approaches. The focus of this thesis has been on modeling and control of the pneumatic muscle actuator with PWM on/off valves. First, the modeling of pneumatic muscle actuator system controlled by a single on/off valve is presented. The majority of the effort focused on the modeling of muscle actuator nonlinear force characteristics and valve mass flow rate modeling. A novel force model was developed and valve flow model for both simulation and control design were identified and presented. The derived system models (linear and nonlinear), were used for both control design and utilized also in simulation based system analysis. Due to highly nonlinear characteristics and uncertainties of the system, a sliding mode control (SMC) was chosen for a control law. SMC strategy has been proven to be an efficient and robust control strategy for highly nonlinear pneumatic actuator applications. Different variations of sliding mode control, SMC with linear model (SMCL) and nonlinear model (SMCNL) as well as SMC with integral sliding surface (SMCI) were compared with a traditional proportional plus velocity plus acceleration control with feed-forward (PVA+FF) compensation. Also, the effects of PWM frequency on the system performance were studied. Different valve configurations, single 3/2, dual 2/2, and servo valve, for controlling a single muscle actuator system were studied. System models for each case were formulated in a manner to have a direct comparison of the configuration and enabling the use of same sliding mode control design. The analysis of performance included the sinusoidal tracking precision and robustness to parameter variations and external disturbances. In a similar manner, a comparison of muscle actuators in an opposing pair configuration controlled by four 2/2 valves and servo valve was executed. Finally, a comparison of a position servo realized with pneumatic muscle actuators to the one realized with traditional cylinder was presented. In these cases, servo valve with SMC and SMCI were used to control the systems. The analysis of performance included steady-state error in point-to-point positioning, the RMSE of sinusoidal tracking precision, and robustness to parameter variations

Design and Control of Electrical Motor Drives

Dear Colleagues, I am very happy to have this Special Issue of the journal Energies on the topic of Design and Control of Electrical Motor Drives published. Electrical motor drives are widely used in the industry, automation, transportation, and home appliances. Indeed, rolling mills, machine tools, high-speed trains, subway systems, elevators, electric vehicles, air conditioners, all depend on electrical motor drives.However, the production of effective and practical motors and drives requires flexibility in the regulation of current, torque, flux, acceleration, position, and speed. Without proper modeling, drive, and control, these motor drive systems cannot function effectively.To address these issues, we need to focus on the design, modeling, drive, and control of different types of motors, such as induction motors, permanent magnet synchronous motors, brushless DC motors, DC motors, synchronous reluctance motors, switched reluctance motors, flux-switching motors, linear motors, and step motors.Therefore, relevant research topics in this field of study include modeling electrical motor drives, both in transient and in steady-state, and designing control methods based on novel control strategies (e.g., PI controllers, fuzzy logic controllers, neural network controllers, predictive controllers, adaptive controllers, nonlinear controllers, etc.), with particular attention to transient responses, load disturbances, fault tolerance, and multi-motor drive techniques. This Special Issue include original contributions regarding recent developments and ideas in motor design, motor drive, and motor control. The topics include motor design, field-oriented control, torque control, reliability improvement, advanced controllers for motor drive systems, DSP-based sensorless motor drive systems, high-performance motor drive systems, high-efficiency motor drive systems, and practical applications of motor drive systems. I want to sincerely thank authors, reviewers, and staff members for their time and efforts. Prof. Dr. Tian-Hua Liu Guest Edito

Autonomous Vehicles

This edited volume, Autonomous Vehicles, is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of vehicle autonomy. The book comprises nine chapters authored by various researchers and edited by an expert active in the field of study. All chapters are complete in itself but united under a common research study topic. This publication aims to provide a thorough overview of the latest research efforts by international authors, open new possible research paths for further novel developments, and to inspire the younger generations into pursuing relevant academic studies and professional careers within the autonomous vehicle field