Reconfigurable nanoelectronics using graphene based spintronic logic gates

This paper presents a novel design concept for spintronic nanoelectronics that emphasizes a seamless integration of spin-based memory and logic circuits. The building blocks are magneto-logic gates based on a hybrid graphene/ferromagnet material system. We use network search engines as a technology demonstration vehicle and present a spin-based circuit design with smaller area, faster speed, and lower energy consumption than the state-of-the-art CMOS counterparts. This design can also be applied in applications such as data compression, coding and image recognition. In the proposed scheme, over 100 spin-based logic operations are carried out before any need for a spin-charge conversion. Consequently, supporting CMOS electronics requires little power consumption. The spintronic-CMOS integrated system can be implemented on a single 3-D chip. These nonvolatile logic circuits hold potential for a paradigm shift in computing applications.Comment: 14 pages (single column), 6 figure

Towards Energy-Efficient and Reliable Computing: From Highly-Scaled CMOS Devices to Resistive Memories

The continuous increase in transistor density based on Moore\u27s Law has led us to highly scaled Complementary Metal-Oxide Semiconductor (CMOS) technologies. These transistor-based process technologies offer improved density as well as a reduction in nominal supply voltage. An analysis regarding different aspects of 45nm and 15nm technologies, such as power consumption and cell area to compare these two technologies is proposed on an IEEE 754 Single Precision Floating-Point Unit implementation. Based on the results, using the 15nm technology offers 4-times less energy and 3-fold smaller footprint. New challenges also arise, such as relative proportion of leakage power in standby mode that can be addressed by post-CMOS technologies. Spin-Transfer Torque Random Access Memory (STT-MRAM) has been explored as a post-CMOS technology for embedded and data storage applications seeking non-volatility, near-zero standby energy, and high density. Towards attaining these objectives for practical implementations, various techniques to mitigate the specific reliability challenges associated with STT-MRAM elements are surveyed, classified, and assessed herein. Cost and suitability metrics assessed include the area of nanomagmetic and CMOS components per bit, access time and complexity, Sense Margin (SM), and energy or power consumption costs versus resiliency benefits. In an attempt to further improve the Process Variation (PV) immunity of the Sense Amplifiers (SAs), a new SA has been introduced called Adaptive Sense Amplifier (ASA). ASA can benefit from low Bit Error Rate (BER) and low Energy Delay Product (EDP) by combining the properties of two of the commonly used SAs, Pre-Charge Sense Amplifier (PCSA) and Separated Pre-Charge Sense Amplifier (SPCSA). ASA can operate in either PCSA or SPCSA mode based on the requirements of the circuit such as energy efficiency or reliability. Then, ASA is utilized to propose a novel approach to actually leverage the PV in Non-Volatile Memory (NVM) arrays using Self-Organized Sub-bank (SOS) design. SOS engages the preferred SA alternative based on the intrinsic as-built behavior of the resistive sensing timing margin to reduce the latency and power consumption while maintaining acceptable access time

Improving Phase Change Memory (PCM) and Spin-Torque-Transfer Magnetic-RAM (STT-MRAM) as Next-Generation Memories: A Circuit Perspective

In the memory hierarchy of computer systems, the traditional semiconductor memories Static RAM (SRAM) and Dynamic RAM (DRAM) have already served for several decades as cache and main memory. With technology scaling, they face increasingly intractable challenges like power, density, reliability and scalability. As a result, they become less appealing in the multi/many-core era with ever increasing size and memory-intensity of working sets. Recently, there is an increasing interest in using emerging non-volatile memory technologies in replacement of SRAM and DRAM, due to their advantages like non-volatility, high device density, near-zero cell leakage and resilience to soft errors. Among several new memory technologies, Phase Change Memory (PCM) and Spin-Torque-Transfer Magnetic-RAM (STT-MRAM) are most promising candidates in building main memory and cache, respectively. However, both of them possess unique limitations that preventing them from being effectively adopted. In this dissertation, I present my circuit design work on tackling the limitations of PCM and STT-MRAM. At bit level, both PCM and STT-MRAM suffer from excessive write energy, and PCM has very limited write endurance. For PCM, I implement Differential Write to remove large number of unnecessary bit-writes that do not alter the stored data. It is then extended to STT-MRAM as Early Write Termination, with specific optimizations to eliminate the overhead of pre-write read. At array level, PCM enjoys high density but could not provide competitive throughput due to its long write latency and limited number of read/write circuits. I propose a Pseudo-Multi-Port Bank design to exploit intra-bank parallelism by recycling and reusing shared peripheral circuits between accesses in a time-multiplexed manner. On the other hand, although STT-MRAM features satisfactory throughput, its conventional array architecture is constrained on density and scalability by the pitch of the per-column bitline pair. I propose a Common-Source-Line Array architecture which uses a shared source-line along the row, essentially leaving only one bitline per column. For these techniques, I provide circuit level analyses as well as architecture/system level and/or process/device level discussions. In addition, relevant background and work are thoroughly surveyed and potential future research topics are discussed, offering insights and prospects of these next-generation memories

Performance impact of a slower main memory: a case study of STT-MRAM in HPC

In high-performance computing (HPC), significant effort is invested in research and development of novel memory technologies. One of them is Spin Transfer Torque Magnetic Random Access Memory (STT-MRAM) --- byte-addressable, high-endurance non-volatile memory with slightly higher access time than DRAM. In this study, we conduct a preliminary assessment of HPC system performance impact with STT-MRAM main memory with recent industry estimations. Reliable timing parameters of STT-MRAM devices are unavailable, so we also perform a sensitivity analysis that correlates overall system slowdown trend with respect to average device latency. Our results demonstrate that the overall system performance of large HPC clusters is not particularly sensitive to main-memory latency. Therefore, STT-MRAM, as well as any other emerging non-volatile memories with comparable density and access time, can be a viable option for future HPC memory system design.This work was supported by the Collaboration Agreement between Samsung Electronics Co., Ltd. and BSC, Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project and by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272). This work has also received funding from the European Union's Horizon 2020 research and innovation programme under ExaNoDe project (grant agreement No 671578).Peer ReviewedPostprint (author's final draft

Design techniques for dense embedded memory in advanced CMOS technologies

University of Minnesota Ph.D. dissertation. February 2012. Major: Electrical Engineering. Advisor: Chris H. Kim. 1 computer file (PDF); viii, 116 pages.On-die cache memory is a key component in advanced processors since it can boost micro-architectural level performance at a moderate power penalty. Demand for denser memories only going to increase as the number of cores in a microprocessor goes up with technology scaling. A commensurate increase in the amount of cache memory is needed to fully utilize the larger and more powerful processing units. 6T SRAMs have been the embedded memory of choice for modern microprocessors due to their logic compatibility, high speed, and refresh-free operation. However, the relatively large cell size and conflicting requirements for read and write make aggressive scaling of 6T SRAMs challenging in sub-22 nm. In this dissertation, circuit techniques and simulation methodologies are presented to demonstrate the potential of alternative options such as gain cell eDRAMs and spin-torque-transfer magnetic RAMs (STT-MRAMs) for high density embedded memories.Three unique test chip designs are presented to enhance the retention time and access speed of gain cell eDRAMs. Proposed bit-cells utilize preferential boostings, beneficial couplings, and aggregated cell leakages for expanding signal window between data `1' and `0'. The design space of power-delay product can be further enhanced with various assist schemes that harness the innate properties of gain cell eDRAMs. Experimental results from the test chips demonstrate that the proposed gain cell eDRAMs achieve overall faster system performances and lower static power dissipations than SRAMs in a generic 65 nm low-power (LP) CMOS process. A magnetic tunnel junction (MTJ) scaling scenario and an efficient HSPICE simulation methodology are proposed for exploring the scalability of STT-MRAMs under variation effects from 65 nm to 8 nm. A constant JC0*RA/VDD scaling method is adopted to achieve optimal read and write performances of STT-MRAMs and thermal stabilities for a 10 year retention are achieved by adjusting free layer thicknesses as well as projecting crystalline anisotropy improvements. Studies based on the proposed methodology show that in-plane STT-MRAM will outperform SRAM from 15 nm node, while its perpendicular counterpart requires further innovations in MTJ material properties in order to overcome the poor write performance from 22 nm node

LOW POWER CIRCUITS DESIGN USING RESISTIVE NON-VOLATILE MEMORIES

Ph.DDOCTOR OF PHILOSOPH

Evaluation of STT-MRAM main memory for HPC and real-time systems

It is questionable whether DRAM will continue to scale and will meet the needs of next-generation systems. Therefore, significant effort is invested in research and development of novel memory technologies. One of the candidates for nextgeneration memory is Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM). STT-MRAM is an emerging non-volatile memory with a lot of potential that could be exploited for various requirements of different computing systems. Being a novel technology, STT-MRAM devices are already approaching DRAM in terms of capacity, frequency and device size. Special STT-MRAM features such as intrinsic radiation hardness, non-volatility, zero stand-by power and capability to function in extreme temperatures also make it particularly suitable for aerospace, avionics and automotive applications. Despite of being a conceivable alternative for main memory technology, to this day, academic research of STT-MRAM main memory remains marginal. This is mainly due to the unavailability of publicly available detailed timing parameters of this novel technology, which are required to perform a cycle accurate main memory simulation. Some researchers adopt simplistic memory models to simulate main memory, but such models can introduce significant errors in the analysis of the overall system performance. Therefore, detailed timing parameters are a must-have for any evaluation or architecture exploration study of STT-MRAM main memory. These detailed parameters are not publicly available because STT-MRAM manufacturers are reluctant to release any delicate information on the technology. This thesis demonstrates an approach to perform a cycle accurate simulation of STT-MRAM main memory, being the first to release detailed timing parameters of this technology from academia, essentially enabling researchers to conduct reliable system level simulation of STT-MRAM using widely accepted existing simulation infrastructure. Our results show that, in HPC domain STT-MRAM provide performance comparable to DRAM. Results from the power estimation indicates that STT-MRAM power consumption increases significantly for Activation/Precharge power while Burst power increases moderately and Background power does not deviate much from DRAM. The thesis includes detailed STT-MRAM main memory timing parameters to the main repositories of DramSim2 and Ramulator, two of the most widely used and accepted state-of-the-art main memory simulators. The STT-MRAM timing parameters that has been originated as a part of this thesis, are till date the only reliable and publicly available timing information on this memory technology published from academia. Finally, the thesis analyzes the feasibility of using STT-MRAM in real-time embedded systems by investigating STT-MRAM main memory impact on average system performance and WCET. STT-MRAM's suitability for the real-time embedded systems is validated on benchmarks provided by the European Space Agency (ESA), EEMBC Autobench and MediaBench suite by analyzing performance and WCET impact. In quantitative terms, our results show that STT-MRAM main memory in real-time embedded systems provides performance and WCET comparable to conventional DRAM, while opening up opportunities to exploit various advantages.Es cuestionable si DRAM continuará escalando y cumplirá con las necesidades de los sistemas de la próxima generación. Por lo tanto, se invierte un esfuerzo significativo en la investigación y el desarrollo de nuevas tecnologías de memoria. Uno de los candidatos para la memoria de próxima generación es la Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM). STT-MRAM es una memoria no volátil emergente con un gran potencial que podría ser explotada para diversos requisitos de diferentes sistemas informáticos. Al ser una tecnología novedosa, los dispositivos STT-MRAM ya se están acercando a la DRAM en términos de capacidad, frecuencia y tamaño del dispositivo. Las características especiales de STTMRAM, como la dureza intrínseca a la radiación, la no volatilidad, la potencia de reserva cero y la capacidad de funcionar en temperaturas extremas, también lo hacen especialmente adecuado para aplicaciones aeroespaciales, de aviónica y automotriz. A pesar de ser una alternativa concebible para la tecnología de memoria principal, hasta la fecha, la investigación académica de la memoria principal de STT-MRAM sigue siendo marginal. Esto se debe principalmente a la falta de disponibilidad de los parámetros de tiempo detallados públicamente disponibles de esta nueva tecnología, que se requieren para realizar un ciclo de simulación de memoria principal precisa. Algunos investigadores adoptan modelos de memoria simplistas para simular la memoria principal, pero tales modelos pueden introducir errores significativos en el análisis del rendimiento general del sistema. Por lo tanto, los parámetros de tiempo detallados son indispensables para cualquier evaluación o estudio de exploración de la arquitectura de la memoria principal de STT-MRAM. Estos parámetros detallados no están disponibles públicamente porque los fabricantes de STT-MRAM son reacios a divulgar información delicada sobre la tecnología. Esta tesis demuestra un enfoque para realizar un ciclo de simulación precisa de la memoria principal de STT-MRAM, siendo el primero en lanzar parámetros de tiempo detallados de esta tecnología desde la academia, lo que esencialmente permite a los investigadores realizar una simulación confiable a nivel de sistema de STT-MRAM utilizando una simulación existente ampliamente aceptada infraestructura. Nuestros resultados muestran que, en el dominio HPC, STT-MRAM proporciona un rendimiento comparable al de la DRAM. Los resultados de la estimación de potencia indican que el consumo de potencia de STT-MRAM aumenta significativamente para la activation/Precharge power, mientras que la Burst power aumenta moderadamente y la Background power no se desvía mucho de la DRAM. La tesis incluye parámetros detallados de temporización memoria principal de STT-MRAM a los repositorios principales de DramSim2 y Ramulator, dos de los simuladores de memoria principal más avanzados y más utilizados y aceptados. Los parámetros de tiempo de STT-MRAM que se han originado como parte de esta tesis, son hasta la fecha la única información de tiempo confiable y disponible al público sobre esta tecnología de memoria publicada desde la academia. Finalmente, la tesis analiza la viabilidad de usar STT-MRAM en real-time embedded systems mediante la investigación del impacto de la memoria principal de STT-MRAM en el rendimiento promedio del sistema y WCET. La idoneidad de STTMRAM para los real-time embedded systems se valida en los applicaciones proporcionados por la European Space Agency (ESA), EEMBC Autobench y MediaBench, al analizar el rendimiento y el impacto de WCET. En términos cuantitativos, nuestros resultados muestran que la memoria principal de STT-MRAM en real-time embedded systems proporciona un desempeño WCET comparable al de una memoria DRAM convencional, al tiempo que abre oportunidades para explotar varias ventajas

Design of Logic-Compatible Embedded Flash Memories for Moderate Density On-Chip Non-Volatile Memory Applications

University of Minnesota Ph.D. dissertation. December 2013. Major: Electrical Engineering. Advisor: Chris H. Kim. 1 computer file (PDF); xx, 129 pages.An on-chip embedded NVM (eNVM) enables a zero-standby power system-on-a-chip with a smaller form factor, faster access speed, lower access power, and higher security than an off-chip NVM. Differently from the high density eNVM technologies such as dual-poly eflash, FeRAM, STT-MRAM, and RRAM that typically require process overhead beyond standard logic process, the moderate density eNVM technologies such as e-fuse, anti-fuse, and single-poly embedded flash (eflash) can be fabricated in a standard logic process with no process overhead. Among them, a single-poly eflash is a unique multiple-time programmable moderate density eNVM, while it is expected to play a key role in mitigating variability and reliability issues of the future VLSI technologies; however, the challenges such as a high voltage disturbance, an implementation of logic compatible High Voltage Switch (HVS), and a limited sensing margin are required to be solved for its implementation using a standard I/O device. This thesis focuses on alleviating such challenges of the single-poly eflash memory with three single-poly eflash designs proposed in a generic logic process for moderate density eNVM applications. Firstly, the proposed 5T eflash features a WL-by-WL accessible architecture with no disturbance issue of the unselected WL cells, an overstress-free multi-story HVS expanding the cell sensing margin, and a selective WL refresh scheme for the higher cell endurance. The most favorable eflash cell configuration is also studied when the performance, endurance, retention, and disturbance characteristics are all considered. Secondly, the proposed 6T eflash features the bit-by-bit re-write capability for the higher overall cell endurance, while not disturbing the unselected WL cells. The logic compatible on-chip charge pump to provide the appropriate high voltages for the proposed eflash operations is also discussed. Finally, the proposed 10T eflash features a multi-configurable HVS that does not require the boosted read supplies, and a differential cell architecture with improved retention time. All these proposed eflash memories were implemented in a 65nm standard logic process, and the test chip measurement results confirmed the functionality of the proposed designs with a reasonable retention margin, showing the competitiveness of the proposed eflash memories compared to the other moderate density eNVM candidates

An Analog VLSI Deep Machine Learning Implementation

Machine learning systems provide automated data processing and see a wide range of applications. Direct processing of raw high-dimensional data such as images and video by machine learning systems is impractical both due to prohibitive power consumption and the “curse of dimensionality,” which makes learning tasks exponentially more difficult as dimension increases. Deep machine learning (DML) mimics the hierarchical presentation of information in the human brain to achieve robust automated feature extraction, reducing the dimension of such data. However, the computational complexity of DML systems limits large-scale implementations in standard digital computers. Custom analog signal processing (ASP) can yield much higher energy efficiency than digital signal processing (DSP), presenting means of overcoming these limitations. The purpose of this work is to develop an analog implementation of DML system. First, an analog memory is proposed as an essential component of the learning systems. It uses the charge trapped on the floating gate to store analog value in a non-volatile way. The memory is compatible with standard digital CMOS process and allows random-accessible bi-directional updates without the need for on-chip charge pump or high voltage switch. Second, architecture and circuits are developed to realize an online k-means clustering algorithm in analog signal processing. It achieves automatic recognition of underlying data pattern and online extraction of data statistical parameters. This unsupervised learning system constitutes the computation node in the deep machine learning hierarchy. Third, a 3-layer, 7-node analog deep machine learning engine is designed featuring online unsupervised trainability and non-volatile floating-gate analog storage. It utilizes massively parallel reconfigurable current-mode analog architecture to realize efficient computation. And algorithm-level feedback is leveraged to provide robustness to circuit imperfections in analog signal processing. At a processing speed of 8300 input vectors per second, it achieves 1×1012 operation per second per Watt of peak energy efficiency. In addition, an ultra-low-power tunable bump circuit is presented to provide similarity measures in analog signal processing. It incorporates a novel wide-input-range tunable pseudo-differential transconductor. The circuit demonstrates tunability of bump center, width and height with a power consumption significantly lower than previous works