9 research outputs found
Respiratory Compensated Robot for Liver Cancer Treatment: Design, Fabrication, and Benchtop Characterization
Hepatocellular carcinoma (HCC) is one of the leading causes of cancer-related death in the world. Radiofrequency ablation (RFA) is an effective method for treating tumors less than 5 cm. However, manually placing the RFA needle at the site of the tumor is challenging due to the complicated respiratory induced motion of the liver. This paper presents the design, fabrication, and benchtop characterization of a patient mounted, respiratory compensated robotic needle insertion platform to perform percutaneous needle interventions. The robotic platform consists of a 4-DoF dual-stage cartesian platform used to control the pose of a 1-DoF needle insertion module. The active needle insertion module consists of a 3D printed flexible fluidic actuator capable of providing a step-like, grasp-insert-release actuation that mimics the manual insertion procedure. Force characterization of the needle insertion module indicates that the device is capable of producing 22.6 ± 0.40 N before the needle slips between the grippers. Static phantom targeting experiments indicate a positional error of 1.14 ± 0.30 mm and orientational error of 0.99° ± 0.36°. Static ex-vivo porcine liver targeting experiments indicate a positional error of 1.22 ± 0.31 mm and orientational error of 1.16° ± 0.44°. Dynamic targeting experiments with the proposed active motion compensation in dynamic phantom and ex-vivo porcine liver show 66.3% and 69.6% positional accuracy improvement, respectively. Future work will continue to develop this platform with the long-term goal of applying the system to RFA for HCC
Design and control of 3-DOF needle positioner for MRI-guided laser ablation of liver tumours
This article presents the design and control of a pneumatic needle positioner for laser ablation of liver tumours under guidance by magnetic resonance imaging (MRI). The prototype was developed to provide accurate point-to-point remote positioning of a needle guide inside an MR scanner with the aim of evaluating the potential advantages over the manual procedure. In order to minimise alterations to the MR environment, the system employs plastic pneumatic actuators and 9 m long supply lines connecting with the control hardware located outside the magnet room. An improved sliding mode control (SMC) scheme was designed for the position control of the device. Wireless micro-coil fiducials are used for automatic registration in the reference frame of the MR scanner. The MRI-compatibility and the accuracy of the prototype are demonstrated with experiments in the MR scanner
Needle-guiding robot for laser ablation of liver tumors under MRI guidance
This paper presents the design, control and experimental evaluation of a needle-guiding robot intended for use in laser ablation (LA) of liver tumors under guidance by Magnetic Resonance Imaging (MRI). The robot provides alignment of a needle guide inside the MRI scanner bore and employs manual needle insertion. In order to minimize MR-image deterioration, the robot is actuated using plastic pneumatic cylinders and long pipes connecting to control valves located outside the MRI scanner room. A new Time Delay Control scheme (TDC) was employed to achieve high position accuracy without requiring pressure or force measurements in the MRI scanner. The control scheme was compared with experiments to a previously developed Sliding Mode Controller (SMC). A marker localization method based on the convolution theorem of Fourier transform was employed to register the robot in the MRI scanner coordinate system and to verify the position of the needle guide before the manual needle insertion. Experiments in a closed-bore MRI scanner showed a variation in SNR below 5%. A phantom study indicates that the targeting error in robot-assisted needle insertions is below 5 mm and suggest a potential time saving of 30 minutes compared to the manual MRI-guided LA procedure
Conception d'un robot positionneur d'aiguille pour les interventions percutanées au niveau du foie, guidées par IRM
Dans la dernière décennie, la robotique souple a connu un gain de popularité considérable. Elle est, de façon inhérente, sécuritaire pour les humains et l’environnement qui l’entourent. Grâce à sa faible rigidité, la robotique souple est idéale pour manipuler des objets fragiles et elle est en mesure de s’adapter à son environnement. Les caractéristiques uniques de la robotique souple font de cette technologie un tremplin vers la conception d’appareils médicaux novateurs, plus particulièrement pour des outils permettant le positionnement d’aiguilles dans le but de faire des interventions percutanées, notamment au niveau du foie.
Toutefois, la souplesse de cette technologie induit, du même coup, quelques désagréments. Elle procure un comportement sécuritaire, mais entraîne aussi un manque de rigidité limitant les applications de la robotique souple. Sans une rigidité minimale, il est impossible d’accomplir des opérations repérables et précises. La robotique souple a en fait un compromis majeur entre la capacité de chargement et la plage d’utilisation. Pour utiliser cette technologie dans le domaine médical, il est primordial d’ajouter un système permettant de moduler la rigidité du système pour inhiber ce compromis.
Couplée avec un système de freinage granulaire, la robotique souple semble comporter l’ensemble des caractéristiques permettant d’accomplir des interventions au foie. Cette étude tend à démontrer que couplée à un système modulant la rigidité, la robotique souple peut être utilisée pour accomplir des opérations d’une façon précise et repérable, tout en demeurant sécuritaire.
Le positionneur d’aiguilles développé est 100 % compatible avec l’Imagerie à Résonance Magnétique (IRM). La plage d’insertion du système permet de rejoindre l’entièreté du foie (1500 cm³), tout en maintenant une rigidité suffisante (3 N/mm) et en étant aussi précis que l’outil d’imagerie utilisée (1 mm).
L’approche hybride consistant à développer un système activé de façon souple couplée à un module régulant sa rigidité permet d’obtenir à la fois les avantages d’une robotique compliante (souple) et conventionnelle (dure)
Recommended from our members
Development of positioning devices for MRI-guided high intensity focused ultrasound (HIFU) for abdominal, thyroid and brain, tumours
High intensity focused ultrasound (HIFU) is a promising technology for a variety of therapeutic applications. This concept initiated in 1942 by Lynn Zwemer [1]. HIFU has long been known as a minimal invasive or non-invasive procedure that destroys tissue through ablation. However, it is only in recent years that clinical applications are becoming feasible, with the development of high power ultrasound transducers compatible with the MRI scanner which is used to monitor these non-invasive HIFU applications. New technologies, combined with more sophisticated treatment methods and monitoring methods allow non-invasive procedures in many areas such as the brain, eye, breast, kidney, liver, pancreas, thyroid, uterine fibroids and pancreas. Meanwhile, new investigations are underway for treading cardiac arithmia, strokes, palliative pain treatment of bone metastases and brain disorders such as Parkinson’s disease, essential tremor, and neuropathic pain. These optimistic investigations have encouraged physicians and provided them new valuable tools for medical research
Multi-probe robotic positioner for cryoablation in MRI
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 116-118).This thesis describes the design of a guidance device for faster and more accurate targeting of multiple probes during cryoablation and other percutaneous interventions performed in closed bore magnetic resonance (MR) imaging systems. The device is intended to be mounted onto a Siemens 110 mm MR loop coil that rests on the patient and contains a cable driven two-degree-of- freedom spherical mechanism that orientates the intervention probes about a remote center of motion located 15 mm above the skin entry point. A carriage, pulled by strong and low stretch cables, can position up to three intervention probes as it travels on a rotating hoop. Its motion is constrained by a custom designed roller bearing to minimize friction. A thumbscrew fastened latch allows a probe to be engaged in a guide that constrains the probe along a specific trajectory. The probe can also be disengaged from its track, freeing it to move with respiration and enabling the guide to be repositioned for another probe to be inserted. Compact MR compatible piezoelectric motors are used to actuate the system. A prototype was built from 3D printed ABS plastic as a proof of concept. Bench level evaluation demonstrated that each component of the device performs according to the design specifications. The device performance was characterized by analyzing still images taken before and after movement, which yielded sub-degree accuracy, sub-degree repeatability near vertical position, and an incremental step resolution of at least 0.5 degree. Upon further developments of the registration and calibration modules in 3D slicer to interface the robot with image data, evaluation of the device in MRI will be performed.by Faye Y. Wu.S.M
Medical robots for MRI guided diagnosis and therapy
Magnetic Resonance Imaging (MRI) provides the capability of imaging tissue with fine resolution and
superior soft tissue contrast, when compared with conventional ultrasound and CT imaging, which
makes it an important tool for clinicians to perform more accurate diagnosis and image guided therapy.
Medical robotic devices combining the high resolution anatomical images with real-time navigation, are
ideal for precise and repeatable interventions. Despite these advantages, the MR environment imposes
constraints on mechatronic devices operating within it. This thesis presents a study on the design and
development of robotic systems for particular MR interventions, in which the issue of testing the MR
compatibility of mechatronic components, actuation control, kinematics and workspace analysis, and
mechanical and electrical design of the robot have been investigated. Two types of robotic systems
have therefore been developed and evaluated along the above aspects.
(i) A device for MR guided transrectal prostate biopsy: The system was designed from components
which are proven to be MR compatible, actuated by pneumatic motors and ultrasonic motors, and
tracked by optical position sensors and ducial markers. Clinical trials have been performed with the
device on three patients, and the results reported have demonstrated its capability to perform needle
positioning under MR guidance, with a procedure time of around 40mins and with no compromised
image quality, which achieved our system speci cations.
(ii) Limb positioning devices to facilitate the magic angle effect for diagnosis of tendinous injuries:
Two systems were designed particularly for lower and upper limb positioning, which are actuated and
tracked by the similar methods as the first device. A group of volunteers were recruited to conduct
tests to verify the functionality of the systems. The results demonstrate the clear enhancement of the
image quality with an increase in signal intensity up to 24 times in the tendon tissue caused by the
magic angle effect, showing the feasibility of the proposed devices to be applied in clinical diagnosis
Proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress
Published proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress, hosted by York University, 27-30 May 2018