453 research outputs found
Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems
Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER
Waveforms and channel coding for 5G
Abstract. The fifth generation (5G) communication systems are required to perform significantly better than the existing fourth generation (4G) systems in data rate, capacity, coverage, latency, energy consumption and cost. Hence, 5G needs to achieve considerable enhancements in the areas of bandwidth, spectral, energy, and signaling efficiencies and cost per bit. The new radio access technology (RAT) of 5G physical layer needs to utilize an efficient waveform to meet the demands of 5G. Orthogonal frequency division multiplexing (OFDM) is considered as a baseline for up to 30 GHz. However, a major drawback of OFDM systems is their large peak to average power ratio (PAPR). Here in this thesis, a simple selective-mapping (SLM) technique using scrambling is proposed to reduce the PAPR of OFDM signals. This technique selects symbol sequences with high PAPR and scrambles them until a PAPR sequence below a specific threshold is generated. The computational complexity of the proposed scheme is considerably lower than that of the traditional SLM. Also, performance of the system is investigated through simulations and more than 4.5 dB PAPR reduction is achieved. In addition, performance of single carrier waveforms is analyzed in multiple-input multiple-output (MIMO) systems as an alternative to OFDM. Performance of a single carrier massive MIMO system is presented for both uplink and downlink with single user and multiple user cases and the effect of pre-coding on the PAPR is studied. A variety of channel configurations were investigated such as correlated channels, practical channels and the channels with errors in channel estimate. Furthermore, the candidate coding schemes are investigated for the new RAT in the 5G standard corresponding the activities in the third generation partnership project (3GPP). The schemes are evaluated in terms of block error rate (BLER), bit error rate (BER), computational complexity, and flexibility. These parameters comprise a suitable set to assess the performance of different services and applications. Turbo, low density parity check (LDPC), and polar codes are considered as the candidate schemes. These are investigated in terms of obtaining suitable rates, block lengths by proper design for a fair comparison. The simulations have been carried out in order to obtain BLER / BER performance for various code rates and block lengths, in additive white Gaussian noise (AWGN) channel. Although polar codes perform well at short block lengths, LDPC has a relatively good performance at all the block lengths and code rates. In addition, complexity of the LDPC codes is relatively low. Furthermore, BLER/BER performances of the coding schemes in Rayleigh fading channels are investigated and found that the fading channel performance follows a similar trend as the performance in the AWGN channel
Recommended from our members
Near Shannon Limit and Reduced Peak to Average Power Ratio Channel Coded OFDM
Solutions to the problem of large peak to average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) systems are proposed. Although the design of PAPR reduction codewords has been extensively studied and the existence of asymptotically good codes with low PAPR has been proved, still no reduced PAPR capacity achieving code has been constructed. This is the topic of the current thesis.This goal is achieved by implementing a time-frequency turbo block coded OFDM.
In this scheme, we design the frequency domain component code to have a PAPR bounded by a small number. The time domain component code is designed to obtain good performance while the decoding algorithm has reasonable complexity. Through comparative numerical evaluation we show that our method achieves considerable improvement in terms of PAPR with slight performance degradation compared to capacity achieving codes with similar block lengths. For the frequency domain component code, we used the realization of Golay sequences as cosets of the fi rst order Reed-Muller code and the modi cation of dual BCH code. A simple MAP decoding algorithm for the modi ed dual BCH code is also provided. Finally, we provide a flexible and practical scheme based on probabilistic approach to a PAPR problem. This approach decreases the PAPR without any signi cant
performance loss and without any adverse impact or required change to the system.Engineering and Applied Science
Superposition coded modulation with peak-power limitation
We apply clipping to superposition coded modulation (SCM) systems to reduce the peak-to-average power ratio (PAPR) of the transmitted signal. The impact on performance is investigated by evaluating the mutual information driven by the induced peak-power-limited input signals. It is shown that the rate loss is marginal for moderate clipping thresholds if optimal encoding/decoding is used. This fact is confirmed in examples where capacityapproaching component codes are used together with the maximum a posteriori probability (MAP) detection. In order to reduce the detection complexity of SCM with a large number of layers, we develop a suboptimal soft compensation (SC) method that is combined with soft-input soft-output (SISO) decoding algorithms in an iterative manner. A variety of simulation results for additive white Gaussian noise (AWGN) and fading channels are presented. It is shown that with the proposed method, the effect of clipping can be efficiently compensated and a good tradeoff between PAPR and bit-error rate (BER) can be achieved. Comparisons with other coded modulation schemes demonstrate that SCM offers significant advantages for high-rate transmissions over fading channels
Advanced Coding And Modulation For Ultra-wideband And Impulsive Noises
The ever-growing demand for higher quality and faster multimedia content delivery over short distances in home environments drives the quest for higher data rates in wireless personal area networks (WPANs). One of the candidate IEEE 802.15.3a WPAN proposals support data rates up to 480 Mbps by using punctured convolutional codes with quadrature phase shift keying (QPSK) modulation for a multi-band orthogonal frequency-division multiplexing (MB-OFDM) system over ultra wideband (UWB) channels. In the first part of this dissertation, we combine more powerful near-Shannon-limit turbo codes with bandwidth efficient trellis coded modulation, i.e., turbo trellis coded modulation (TTCM), to further improve the data rates up to 1.2 Gbps. A modified iterative decoder for this TTCM coded MB-OFDM system is proposed and its bit error rate performance under various impulsive noises over both Gaussian and UWB channel is extensively investigated, especially in mismatched scenarios. A robust decoder which is immune to noise mismatch is provided based on comparison of impulsive noises in time domain and frequency domain. The accurate estimation of the dynamic noise model could be very difficult or impossible at the receiver, thus a significant performance degradation may occur due to noise mismatch. In the second part of this dissertation, we prove that the minimax decoder in \cite, which instead of minimizing the average bit error probability aims at minimizing the worst bit error probability, is optimal and robust to certain noise model with unknown prior probabilities in two and higher dimensions. Besides turbo codes, another kind of error correcting codes which approach the Shannon capacity is low-density parity-check (LDPC) codes. In the last part of this dissertation, we extend the density evolution method for sum-product decoding using mismatched noises. We will prove that as long as the true noise type and the estimated noise type used in the decoder are both binary-input memoryless output symmetric channels, the output from mismatched log-likelihood ratio (LLR) computation is also symmetric. We will show the Shannon capacity can be evaluated for mismatched LLR computation and it can be reduced if the mismatched LLR computation is not an one-to-one mapping function. We will derive the Shannon capacity, threshold and stable condition of LDPC codes for mismatched BIAWGN and BIL noise types. The results show that the noise variance estimation errors will not affect the Shannon capacity and stable condition, but the errors do reduce the threshold. The mismatch in noise type will only reduce Shannon capacity when LLR computation is based on BIL
Turbo Decoding and Detection for Wireless Applications
A historical perspective of turbo coding and turbo transceivers inspired by the generic turbo principles is provided, as it evolved from Shannon’s visionary predictions. More specifically, we commence by discussing the turbo principles, which have been shown to be capable of performing close to Shannon’s capacity limit. We continue by reviewing the classic maximum a posteriori probability decoder. These discussions are followed by studying the effect of a range of system parameters in a systematic fashion, in order to gauge their performance ramifications. In the second part of this treatise, we focus our attention on the family of iterative receivers designed for wireless communication systems, which were partly inspired by the invention of turbo codes. More specifically, the family of iteratively detected joint coding and modulation schemes, turbo equalization, concatenated spacetime and channel coding arrangements, as well as multi-user detection and three-stage multimedia systems are highlighted
Investigation of non-binary trellis codes designed for impulsive noise environments
PhD ThesisIt is well known that binary codes with iterative decoders can achieve
near Shannon limit performance on the additive white Gaussian noise
(AWGN) channel, but their performance on more realistic wired or wireless
channels can become degraded due to the presence of burst errors
or impulsive noise. In such extreme environments, error correction alone
cannot combat the serious e ect of the channel and must be combined
with the signal processing techniques such as channel estimation, channel
equalisation and orthogonal frequency division multiplexing (OFDM).
However, even after the received signal has been processed, it can still
contain burst errors, or the noise present in the signal maybe non Gaussian.
In these cases, popular binary coding schemes such as Low-Density
Parity-Check (LDPC) or turbo codes may not perform optimally, resulting
in the degradation of performance. Nevertheless, there is still scope
for the design of new non-binary codes that are more suitable for these
environments, allowing us to achieve further gains in performance. In
this thesis, an investigation into good non-binary trellis error-correcting
codes and advanced noise reduction techniques has been carried out with
the aim of enhancing the performance of wired and wireless communication
networks in di erent extreme environments. These environments
include, urban, indoor, pedestrian, underwater, and powerline communication
(PLC). This work includes an examination of the performance
of non-binary trellis codes in harsh scenarios such as underwater communications
when the noise channel is additive S S noise. Similar work
was also conducted for single input single output (SISO) power line communication
systems for single carrier (SC) and multi carrier (MC) over
realistic multi-path frequency selective channels. A further examination
of multi-input multi-output (MIMO) wired and wireless systems on
Middleton class A noise channel was carried out. The main focus of the
project was non-binary coding schemes as it is well-known that they outperform
their binary counterparts when the channel is bursty. However,
few studies have investigated non-binary codes for other environments.
The major novelty of this work is the comparison of the performance
of non-binary trellis codes with binary trellis codes in various scenarios,
leading to the conclusion that non-binary codes are, in most cases,
superior in performance to binary codes. Furthermore, the theoretical
bounds of SISO and MIMO binary and non-binary convolutional coded
OFDM-PLC systems have been investigated for the rst time. In order
to validate our results, the implementation of simulated and theoretical
results have been obtained for di erent values of noise parameters and
on di erent PLC channels. The results show a strong agreement between
the simulated and theoretical analysis for all cases.University of
Thi-Qar for choosing me for their PhD scholarship and the Iraqi Ministry
of Higher Education and Scienti c Research (MOHESR) for granting me
the funds to study in UK. In addition, there was ample support towards
my stay in the UK from the Iraqi Cultural Attach e in Londo
Constellation design for future communication systems: a comprehensive survey
[EN] The choice of modulation schemes is a fundamental building block of wireless communication
systems. As a key component of physical layer design, they critically impact the expected communication
capacity and wireless signal robustness. Their design is also critical for the successful roll-out of wireless
standards that require a compromise between performance, efficiency, latency, and hardware requirements.
This paper presents a survey of constellation design strategies and associated outcomes for wireless
communication systems. The survey discusses their performance and complexity to address the need for
some desirable properties, including consistency, channel capacity, system performance, required demapping
architecture, flexibility, and independence. Existing approaches for constellation designs are investigated
using appropriate metrics and categorized based on their theoretical algorithm design. Next, their application
to different communication standards is analyzed in context, aiming at distilling general guidelines applicable
to the wireless building block design. Finally, the survey provides a discussion on design directions for future
communication system standardization processes.This work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under
Program PRE_2020_2_0105, and in part by the Spanish Government through the Project PHANTOM (MCIU/AEI/FEDER, UE) under Gran
- …