251 research outputs found

    Robust periodic disturbance compensation via multirate control

    Get PDF
    Master'sMASTER OF ENGINEERIN

    Dual-rate modified stochastic gradient identification for permanent magnet synchronous motor

    Get PDF
    The high-performance application of high-power permanent magnet synchronous motor (PMSM) is increasing. This paper focuses on the parameter estimation of PMSM. A novel estimation algorithm for PMSM’s dual-rate sampled-data system has been developed. A polynomial transformation technique is employed to derive a mathematical model for PMSM’s dual-rate sampled-data system. The proposed modified stochastic gradient algorithm gets more excellent convergence performance for smaller index ε. Simulation and experimental results demonstrate the effectiveness and performance improvement of the proposed algorithm

    Improved performance of hard disk drive servomechanism using digital multirate control

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    Advanced Television Research Program

    Get PDF
    Contains reports on ten research projects.National Science Foundation Grant MIP 87-14969National Science Foundation FellowshipAdvanced Television Research ProgramAT&T Bell Laboratories Doctoral Support ProgramKodak FellowshipU.S. Air Force - Electronic Systems Division Contract F1 9628-89-K-004

    Optimal Control for Aperiodic Dual-Rate Systems With Time-Varying Delays

    Full text link
    [EN] In this work, we consider a dual-rate scenario with slow input and fast output. Our objective is the maximization of the decay rate of the system through the suitable choice of the n-input signals between two measures (periodic sampling) and their times of application. The optimization algorithm is extended for time-varying delays in order to make possible its implementation in networked control systems. We provide experimental results in an air levitation system to verify the validity of the algorithm in a real plant.This work was supported in part by the Spanish Ministry of Economy and Competitiveness (MINECO) under the Projects DPI2012-31303 and DPI2014-55932-C2-2-R.Aranda-Escolástico, E.; Salt Llobregat, JJ.; Guinaldo, M.; Chacon, J.; Dormido, S. (2018). Optimal Control for Aperiodic Dual-Rate Systems With Time-Varying Delays. Sensors. 18(5):1-19. https://doi.org/10.3390/s18051491S119185Mansano, R., Godoy, E., & Porto, A. (2014). The Benefits of Soft Sensor and Multi-Rate Control for the Implementation of Wireless Networked Control Systems. Sensors, 14(12), 24441-24461. doi:10.3390/s141224441Shao, Q. M., & Cinar, A. (2015). System identification and distributed control for multi-rate sampled systems. Journal of Process Control, 34, 1-12. doi:10.1016/j.jprocont.2015.06.010Albertos, P., & Salt, J. (2011). Non-uniform sampled-data control of MIMO systems. Annual Reviews in Control, 35(1), 65-76. doi:10.1016/j.arcontrol.2011.03.004Cuenca, A., & Salt, J. (2012). RST controller design for a non-uniform multi-rate control system. Journal of Process Control, 22(10), 1865-1877. doi:10.1016/j.jprocont.2012.09.010Cuenca, Á., Ojha, U., Salt, J., & Chow, M.-Y. (2015). A non-uniform multi-rate control strategy for a Markov chain-driven Networked Control System. Information Sciences, 321, 31-47. doi:10.1016/j.ins.2015.05.035Kalman, R. E., & Bertram, J. E. (1959). General synthesis procedure for computer control of single-loop and multiloop linear systems (an optimal sampling system). Transactions of the American Institute of Electrical Engineers, Part II: Applications and Industry, 77(6), 602-609. doi:10.1109/tai.1959.6371508Khargonekar, P., Poolla, K., & Tannenbaum, A. (1985). Robust control of linear time-invariant plants using periodic compensation. IEEE Transactions on Automatic Control, 30(11), 1088-1096. doi:10.1109/tac.1985.1103841Bamieh, B., Pearson, J. B., Francis, B. A., & Tannenbaum, A. (1991). A lifting technique for linear periodic systems with applications to sampled-data control. Systems & Control Letters, 17(2), 79-88. doi:10.1016/0167-6911(91)90033-bLi, D., Shah, S. L., Chen, T., & Qi, K. Z. (2001). Application of dual-rate modeling to CCR octane quality inferential control. IFAC Proceedings Volumes, 34(25), 353-357. doi:10.1016/s1474-6670(17)33849-1Salt, J., & Albertos, P. (2005). Model-based multirate controllers design. IEEE Transactions on Control Systems Technology, 13(6), 988-997. doi:10.1109/tcst.2005.857410Nemani, M., Tsao, T.-C., & Hutchinson, S. (1994). Multi-Rate Analysis and Design of Visual Feedback Digital Servo-Control System. Journal of Dynamic Systems, Measurement, and Control, 116(1), 45-55. doi:10.1115/1.2900680Sim, T. P., Lim, K. B., & Hong, G. S. (2002). Multirate predictor control scheme for visual servo control. IEE Proceedings - Control Theory and Applications, 149(2), 117-124. doi:10.1049/ip-cta:20020238Xinghui Huang, Nagamune, R., & Horowitz, R. (2006). A comparison of multirate robust track-following control synthesis techniques for dual-stage and multisensing servo systems in hard disk drives. IEEE Transactions on Magnetics, 42(7), 1896-1904. doi:10.1109/tmag.2006.875353Wu, Y., Liu, Y., & Zhang, W. (2013). A Discrete-Time Chattering Free Sliding Mode Control with Multirate Sampling Method for Flight Simulator. Mathematical Problems in Engineering, 2013, 1-8. doi:10.1155/2013/865493Salt, J., & Tomizuka, M. (2014). Hard disk drive control by model based dual-rate controller. Computation saving by interlacing. Mechatronics, 24(6), 691-700. doi:10.1016/j.mechatronics.2013.12.003Salt, J., Casanova, V., Cuenca, A., & Pizá, R. (2013). Multirate control with incomplete information over Profibus-DP network. International Journal of Systems Science, 45(7), 1589-1605. doi:10.1080/00207721.2013.844286Liu, F., Gao, H., Qiu, J., Yin, S., Fan, J., & Chai, T. (2014). Networked Multirate Output Feedback Control for Setpoints Compensation and Its Application to Rougher Flotation Process. IEEE Transactions on Industrial Electronics, 61(1), 460-468. doi:10.1109/tie.2013.2240640Khargonekar, P. P., & Sivashankar, N. (1991). 2 optimal control for sampled-data systems. Systems & Control Letters, 17(6), 425-436. doi:10.1016/0167-6911(91)90082-pTornero, J., Albertos, P., & Salt, J. (2001). Periodic Optimal Control of Multirate Sampled Data Systems. IFAC Proceedings Volumes, 34(12), 195-200. doi:10.1016/s1474-6670(17)34084-3Kim, C. H., Park, H. J., Lee, J., Lee, H. W., & Lee, K. D. (2015). Multi-rate optimal controller design for electromagnetic suspension systems via linear matrix inequality optimization. Journal of Applied Physics, 117(17), 17B506. doi:10.1063/1.4906588LEE, J. H., GELORMINO, M. S., & MORARIH, M. (1992). Model predictive control of multi-rate sampled-data systems: a state-space approach. International Journal of Control, 55(1), 153-191. doi:10.1080/00207179208934231Mizumoto, I., Ikejiri, M., & Takagi, T. (2015). Stable Adaptive Predictive Control System Design via Adaptive Output Predictor for Multi-rate Sampled Systems∗∗This work was partially supported by KAKENHI, the Grant-in-Aid for Scientific Research (C) 25420444, from the Japan Society for the Promotion of Science (JSPS). IFAC-PapersOnLine, 48(8), 1039-1044. doi:10.1016/j.ifacol.2015.09.105Carpiuc, S., & Lazar, C. (2016). Real-Time Multi-Rate Predictive Cascade Speed Control of Synchronous Machines in Automotive Electrical Traction Drives. IEEE Transactions on Industrial Electronics, 1-1. doi:10.1109/tie.2016.2561881Roshany-Yamchi, S., Cychowski, M., Negenborn, R. R., De Schutter, B., Delaney, K., & Connell, J. (2013). Kalman Filter-Based Distributed Predictive Control of Large-Scale Multi-Rate Systems: Application to Power Networks. IEEE Transactions on Control Systems Technology, 21(1), 27-39. doi:10.1109/tcst.2011.2172444Donkers, M. C. F., Tabuada, P., & Heemels, W. P. M. H. (2012). Minimum attention control for linear systems. Discrete Event Dynamic Systems, 24(2), 199-218. doi:10.1007/s10626-012-0155-xQuevedo, D. E., Ma, W.-J., & Gupta, V. (2015). Anytime Control Using Input Sequences With Markovian Processor Availability. IEEE Transactions on Automatic Control, 60(2), 515-521. doi:10.1109/tac.2014.2335311Aranda Escolastico, E., Guinaldo, M., Cuenca, A., Salt, J., & Dormido, S. (2017). Anytime Optimal Control Strategy for Multi-Rate Systems. IEEE Access, 5, 2790-2797. doi:10.1109/access.2017.2671906Guinaldo, M., Sánchez, J., & Dormido, S. (2017). Control en red basado en eventos: de lo centralizado a lo distribuido. Revista Iberoamericana de Automática e Informática Industrial RIAI, 14(1), 16-30. doi:10.1016/j.riai.2016.09.007Van Loan, C. (1977). The Sensitivity of the Matrix Exponential. SIAM Journal on Numerical Analysis, 14(6), 971-981. doi:10.1137/0714065Hazan, E. (2016). Introduction to Online Convex Optimization. Foundations and Trends® in Optimization, 2(3-4), 157-325. doi:10.1561/2400000013Sala, A., Cuenca, Á., & Salt, J. (2009). A retunable PID multi-rate controller for a networked control system. Information Sciences, 179(14), 2390-2402. doi:10.1016/j.ins.2009.02.017Chacon, J., Saenz, J., Torre, L., Diaz, J., & Esquembre, F. (2017). Design of a Low-Cost Air Levitation System for Teaching Control Engineering. Sensors, 17(10), 2321. doi:10.3390/s1710232

    Analysis and resynthesis of polyphonic music

    Get PDF
    This thesis examines applications of Digital Signal Processing to the analysis, transformation, and resynthesis of musical audio. First I give an overview of the human perception of music. I then examine in detail the requirements for a system that can analyse, transcribe, process, and resynthesise monaural polyphonic music. I then describe and compare the possible hardware and software platforms. After this I describe a prototype hybrid system that attempts to carry out these tasks using a method based on additive synthesis. Next I present results from its application to a variety of musical examples, and critically assess its performance and limitations. I then address these issues in the design of a second system based on Gabor wavelets. I conclude by summarising the research and outlining suggestions for future developments

    Adaptive Control

    Get PDF
    Adaptive control has been a remarkable field for industrial and academic research since 1950s. Since more and more adaptive algorithms are applied in various control applications, it is becoming very important for practical implementation. As it can be confirmed from the increasing number of conferences and journals on adaptive control topics, it is certain that the adaptive control is a significant guidance for technology development.The authors the chapters in this book are professionals in their areas and their recent research results are presented in this book which will also provide new ideas for improved performance of various control application problems

    Fractional Order and Virtual Variable Sampling Design of Repetitive Control for Power Converters

    Get PDF
    With the growth of electricity demand and renewable energy power source, power converter becomes a more and more significant component in electrical power systems. The requirement of the power converter controller is to produce an accurate and low-distorted voltage or current under different load conditions. Although the conventional controller can meet the requirement of some applications, it requires accurate knowledge of the system model and cannot provide a satisfactory result especially under nonlinear loads or sudden load change. Repetitive control (RC) presents an attractive solution to achieve excellent steady-state tracking error and low total harmonic distortion for periodic signals, and it is increasingly applied to power converter systems. However, there are still some limitations or requirements of RC when it is applied to power electronics system: first, RC requires the system sampling frequency is a fixed value and needs to be an integral multiple of the reference frequency; second, low controller sampling frequency results in low phase lead compensation resolution in RC, which leads to control inaccuracy; third, conventional RC does not have frequency adaptability to reference frequency fluctuation, and even a small reference frequency fluctuation can lead to severe performance degradation. To overcome the conventional RC limitations, two advanced design methods are proposed in the thesis: fractional order delay and virtual variable sampling. The method of fractional order delay approximates the non-integer delay part by building a finite impulse response filter. This improved method is not only able to be applied on a period delay unit but also on phase-lead compensation. The accurate period delay and phase lead compensation show a noticeable improvement in RC performance. Although fractional order delay can meet the requirement on most of the applications, it also has a minimal adjustable range on the reference frequency. To achieve an essential solution to this problem, the virtual variable sampling (VVS) method is developed. The VVS approximates a variable sampling unit instead of the fixed system unit for RC and its filters, in which RC is able to be frequency adaptive. Comparing with the method of fractional order delay, the VVS method can provide a much more extensive adjustable range on the reference frequency. Based on the system performance under the conventional controller, power converter always has uneven distortion distribution. To further improve the stability and eliminate harmonic distortions efficiently, two selective harmonic RC schemes are introduced - nk ± m order harmonic RC and DFT-based selective harmonic RC. However, these selective RC schemes also suffer from the particular requirement of system sampling frequency and low reference frequency adaptability. Applying VVS methods on these two schemes can effectively present an improvement on their frequency adaptability. To verify the proposed methods’ effectiveness, a complete series of power electronics applications are carried out. These applications include single-phase and three-phase DC/AC power converter, single-phase AC/DC power converter, and single-phase grid-connected power converter. The detailed system modeling and the proposed RC schemes are presented for each power electronics application

    High-Precision Control of Ball-Screw-Driven Stage Based on Repetitive Control Using n-Times Learning Filter

    Get PDF
    Abstract-This paper presents a novel learning control method for ball-screw-driven stages. In recent years, many types of friction models that are based on complicated equations have been studied. However, it is difficult to treat friction models with equations because the level of precision that is associated with real friction characteristics and parameter tuning are difficult to achieve. In contrast, repetitive perfect tracking control (RPTC) is a repetitive control technique that achieves high-precision positioning. In this paper, we propose the use of RPTC with n-times learning filter. The n-times learning filter has a sharper rolloff property than conventional learning filters. With the use of the n-times learning filter, the proposed RPTC can converge tracking errors n times faster than the RPTC with the conventional learning filter. Simulations and experiments with a ball-screw-driven stage show the fast convergence of the proposed RPTC. Finally, the proposed learning control scheme is combined with data-based friction compensation, and the effectiveness of this combination is verified for the x-y stage of a numerically controlled machine tool. Index Terms-n-times learning, perfect tracking control, repetitive control, zero-phase low-phase filter
    corecore