High precision hybrid RF and ultrasonic chirp-based ranging for low-power IoT nodes

Hybrid acoustic-RF systems offer excellent ranging accuracy, yet they typically come at a power consumption that is too high to meet the energy constraints of mobile IoT nodes. We combine pulse compression and synchronized wake-ups to achieve a ranging solution that limits the active time of the nodes to 1 ms. Hence, an ultra low-power consumption of 9.015 µW for a single measurement is achieved. The operation time is estimated on 8.5 years on a CR2032 coin cell battery at a 1 Hz update rate, which is over 250 times larger than state-of-the-art RF-based positioning systems. Measurements based on a proof-of-concept hardware platform show median distance error values below 10 cm. Both simulations and measurements demonstrate that the accuracy is reduced at low signal-to-noise ratios and when reflections occur. We introduce three methods that enhance the distance measurements at a low extra processing power cost. Hence, we validate in realistic environments that the centimeter accuracy can be obtained within the energy budget of mobile devices and IoT nodes. The proposed hybrid signal ranging system can be extended to perform accurate, low-power indoor positioning

Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices

Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments; where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution, tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally, we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance

Fast Chirped Signals for a TDMA Ultrasonic Indoor Positioning System

In this paper, a new concept for ultrasonic indoor positioning based on instantaneous frequency of ultrasonic signals is presented. Nonlinear phase characteristics of ultrasonic transducers introduce a frequency deviation in ultrasonic signals. By sweeping at very fast rates, a large spike in the deviation is introduced. The artefacts observable in instantaneous frequency estimations are highly localized and present an opportunity for accurate frequency detection. In order to be useful, the artefacts need to take place within the pulse and have sufficient magnitude for accurate processing. The system consists of a transducer transmitter and receiver pair, which have a center frequency of 40kHz and a bandwidth of 460Hz. In order to incorporate more transmitters, a time-division multiple access (TDMA) scheme is applied to ensure orthogonality of signals. The concept includes four ultrasonic transmitters and a single receiver, which can uniquely identify each transmitter by a distinct signal sweep. Linear chirp signals are used to form narrow pulses and ensure no interference in the TDMA scheme. The received signal is amplified and passed through a phase-locked loop (PLL) to detect the chirp signals. Accurate instantaneous frequency detection can be done on the voltage-controlled oscillator (VCO) of the PLL, which has a narrower bandwidth than the overall signal sweep. The instantaneous frequency estimation methods are largely explored in this work and consider two methods: the Hilbert transform and a zero-crossings method. This work highlights some of the advantages and disadvantages of both methods. Time of flight (ToF) in this system can ultimately be obtained by considering the instantaneous frequency estimations and the time for one particular frequency to be transmitted and received

TDoA Based Positioning using Ultrasound Signals and Wireless Nodes

In this paper, a positioning technique based on Time Difference of Arrival (TDoA) measurements is analyzed. The proposed approach is designed to consent range and position estimation, using ultrasound transmissions of a stream of chirp pulses, received by a set of wireless nodes. A potential source of inaccuracy introduced by lack of synchronization between transmitting node and receiving nodes is identified and characterized. An algorithm to identify and correct such inaccuracies is presented.Comment: Preprin

Wireless recording of the calls of Rousettus aegyptiacus and their reproduction using electrostatic transducers

Bats are capable of imaging their surroundings in great detail using echolocation. To apply similar methods to human engineering systems requires the capability to measure and recreate the signals used, and to understand the processing applied to returning echoes. In this work, the emitted and reflected echolocation signals of Rousettus aegyptiacus are recorded while the bat is in flight, using a wireless sensor mounted on the bat. The sensor is designed to replicate the acoustic gain control which bats are known to use, applying a gain to returning echoes that is dependent on the incurred time delay. Employing this technique allows emitted and reflected echolocation calls, which have a wide dynamic range, to be recorded. The recorded echoes demonstrate the complexity of environment reconstruction using echolocation. The sensor is also used to make accurate recordings of the emitted calls, and these calls are recreated in the laboratory using custom-built wideband electrostatic transducers, allied with a spectral equalization technique. This technique is further demonstrated by recreating multi-harmonic bioinspired FM chirps. The ability to record and accurately synthesize echolocation calls enables the exploitation of biological signals in human engineering systems for sonar, materials characterization and imaging