3,843 research outputs found
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Maximum Multipath Routing Throughput in Multirate Wireless Mesh Networks
In this paper, we consider the problem of finding the maximum routing
throughput between any pair of nodes in an arbitrary multirate wireless mesh
network (WMN) using multiple paths. Multipath routing is an efficient technique
to maximize routing throughput in WMN, however maximizing multipath routing
throughput is a NP-complete problem due to the shared medium for
electromagnetic wave transmission in wireless channel, inducing collision-free
scheduling as part of the optimization problem. In this work, we first provide
problem formulation that incorporates collision-free schedule, and then based
on this formulation we design an algorithm with search pruning that jointly
optimizes paths and transmission schedule. Though suboptimal, compared to the
known optimal single path flow, we demonstrate that an efficient multipath
routing scheme can increase the routing throughput by up to 100% for simple
WMNs.Comment: This paper has been accepted for publication in IEEE 80th Vehicular
Technology Conference, VTC-Fall 201
Flow Allocation for Maximum Throughput and Bounded Delay on Multiple Disjoint Paths for Random Access Wireless Multihop Networks
In this paper, we consider random access, wireless, multi-hop networks, with
multi-packet reception capabilities, where multiple flows are forwarded to the
gateways through node disjoint paths. We explore the issue of allocating flow
on multiple paths, exhibiting both intra- and inter-path interference, in order
to maximize average aggregate flow throughput (AAT) and also provide bounded
packet delay. A distributed flow allocation scheme is proposed where allocation
of flow on paths is formulated as an optimization problem. Through an
illustrative topology it is shown that the corresponding problem is non-convex.
Furthermore, a simple, but accurate model is employed for the average aggregate
throughput achieved by all flows, that captures both intra- and inter-path
interference through the SINR model. The proposed scheme is evaluated through
Ns2 simulations of several random wireless scenarios. Simulation results reveal
that, the model employed, accurately captures the AAT observed in the simulated
scenarios, even when the assumption of saturated queues is removed. Simulation
results also show that the proposed scheme achieves significantly higher AAT,
for the vast majority of the wireless scenarios explored, than the following
flow allocation schemes: one that assigns flows on paths on a round-robin
fashion, one that optimally utilizes the best path only, and another one that
assigns the maximum possible flow on each path. Finally, a variant of the
proposed scheme is explored, where interference for each link is approximated
by considering its dominant interfering nodes only.Comment: IEEE Transactions on Vehicular Technolog
Local heuristic for the refinement of multi-path routing in wireless mesh networks
We consider wireless mesh networks and the problem of routing end-to-end
traffic over multiple paths for the same origin-destination pair with minimal
interference. We introduce a heuristic for path determination with two
distinguishing characteristics. First, it works by refining an extant set of
paths, determined previously by a single- or multi-path routing algorithm.
Second, it is totally local, in the sense that it can be run by each of the
origins on information that is available no farther than the node's immediate
neighborhood. We have conducted extensive computational experiments with the
new heuristic, using AODV and OLSR, as well as their multi-path variants, as
underlying routing methods. For two different CSMA settings (as implemented by
802.11) and one TDMA setting running a path-oriented link scheduling algorithm,
we have demonstrated that the new heuristic is capable of improving the average
throughput network-wide. When working from the paths generated by the
multi-path routing algorithms, the heuristic is also capable to provide a more
evenly distributed traffic pattern
Multipath optimized link state routing for mobile ad hoc networks
International audienceMultipath routing protocols for Mobile Ad hoc NETwork (MANET) address the problem of scalability, security (confidentiality and integrity), lifetime of networks, instability of wireless transmissions, and their adaptation to applications. Our protocol, called MP-OLSR (MultiPath OLSR), is a multipath routing protocol based on OLSR. The Multipath Dijkstra Algorithm is proposed to obtain multiple paths. The algorithm gains great flexibility and extensibility by employing different link metrics and cost functions. In addition, route recovery and loop detection are implemented in MP-OLSR in order to improve quality of service regarding OLSR. The backward compatibility with OLSR based on IP source routing is also studied. Simulation based on Qualnet simulator is performed in different scenarios. A testbed is also set up to validate the protocol in real world. The results reveal that MP-OLSR is suitable for mobile, large and dense networks with large traffic, and could satisfy critical multimedia applications with high on time constraints
- …