Audio source separation for music in low-latency and high-latency scenarios

Aquesta tesi proposa mètodes per tractar les limitacions de les tècniques existents de separació de fonts musicals en condicions de baixa i alta latència. En primer lloc, ens centrem en els mètodes amb un baix cost computacional i baixa latència. Proposem l'ús de la regularització de Tikhonov com a mètode de descomposició de l'espectre en el context de baixa latència. El comparem amb les tècniques existents en tasques d'estimació i seguiment dels tons, que són passos crucials en molts mètodes de separació. A continuació utilitzem i avaluem el mètode de descomposició de l'espectre en tasques de separació de veu cantada, baix i percussió. En segon lloc, proposem diversos mètodes d'alta latència que milloren la separació de la veu cantada, gràcies al modelatge de components específics, com la respiració i les consonants. Finalment, explorem l'ús de correlacions temporals i anotacions manuals per millorar la separació dels instruments de percussió i dels senyals musicals polifònics complexes.Esta tesis propone métodos para tratar las limitaciones de las técnicas existentes de separación de fuentes musicales en condiciones de baja y alta latencia. En primer lugar, nos centramos en los métodos con un bajo coste computacional y baja latencia. Proponemos el uso de la regularización de Tikhonov como método de descomposición del espectro en el contexto de baja latencia. Lo comparamos con las técnicas existentes en tareas de estimación y seguimiento de los tonos, que son pasos cruciales en muchos métodos de separación. A continuación utilizamos y evaluamos el método de descomposición del espectro en tareas de separación de voz cantada, bajo y percusión. En segundo lugar, proponemos varios métodos de alta latencia que mejoran la separación de la voz cantada, gracias al modelado de componentes que a menudo no se toman en cuenta, como la respiración y las consonantes. Finalmente, exploramos el uso de correlaciones temporales y anotaciones manuales para mejorar la separación de los instrumentos de percusión y señales musicales polifónicas complejas.This thesis proposes specific methods to address the limitations of current music source separation methods in low-latency and high-latency scenarios. First, we focus on methods with low computational cost and low latency. We propose the use of Tikhonov regularization as a method for spectrum decomposition in the low-latency context. We compare it to existing techniques in pitch estimation and tracking tasks, crucial steps in many separation methods. We then use the proposed spectrum decomposition method in low-latency separation tasks targeting singing voice, bass and drums. Second, we propose several high-latency methods that improve the separation of singing voice by modeling components that are often not accounted for, such as breathiness and consonants. Finally, we explore using temporal correlations and human annotations to enhance the separation of drums and complex polyphonic music signals

Single Channel auditory source separation with neural network

Although distinguishing different sounds in noisy environment is a relative easy task for human, source separation has long been extremely difficult in audio signal processing. The problem is challenging for three reasons: the large variety of sound type, the abundant mixing conditions and the unclear mechanism to distinguish sources, especially for similar sounds. In recent years, the neural network based methods achieved impressive successes in various problems, including the speech enhancement, where the task is to separate the clean speech out of the noise mixture. However, the current deep learning based source separator does not perform well on real recorded noisy speech, and more importantly, is not applicable in a more general source separation scenario such as overlapped speech. In this thesis, we firstly propose extensions for the current mask learning network, for the problem of speech enhancement, to fix the scale mismatch problem which is usually occurred in real recording audio. We solve this problem by combining two additional restoration layers in the existing mask learning network. We also proposed a residual learning architecture for the speech enhancement, further improving the network generalization under different recording conditions. We evaluate the proposed speech enhancement models on CHiME 3 data. Without retraining the acoustic model, the best bi-direction LSTM with residue connections yields 25.13% relative WER reduction on real data and 34.03% WER on simulated data. Then we propose a novel neural network based model called “deep clustering” for more general source separation tasks. We train a deep network to assign contrastive embedding vectors to each time-frequency region of the spectrogram in order to implicitly predict the segmentation labels of the target spectrogram from the input mixtures. This yields a deep network-based analogue to spectral clustering, in that the embeddings form a low-rank pairwise affinity matrix that approximates the ideal affinity matrix, while enabling much faster performance. At test time, the clustering step “decodes” the segmentation implicit in the embeddings by optimizing K-means with respect to the unknown assignments. Experiments on single channel mixtures from multiple speakers show that a speaker-independent model trained on two-speaker and three speakers mixtures can improve signal quality for mixtures of held-out speakers by an average over 10dB. We then propose an extension for deep clustering named “deep attractor” network that allows the system to perform efficient end-to-end training. In the proposed model, attractor points for each source are firstly created the acoustic signals which pull together the time-frequency bins corresponding to each source by finding the centroids of the sources in the embedding space, which are subsequently used to determine the similarity of each bin in the mixture to each source. The network is then trained to minimize the reconstruction error of each source by optimizing the embeddings. We showed that this frame work can achieve even better results. Lastly, we introduce two applications of the proposed models, in singing voice separation and the smart hearing aid device. For the former, a multi-task architecture is proposed, which combines the deep clustering and the classification based network. And a new state of the art separation result was achieved, where the signal to noise ratio was improved by 11.1dB on music and 7.9dB on singing voice. In the application of smart hearing aid device, we combine the neural decoding with the separation network. The system firstly decodes the user’s attention, which is further used to guide the separator for the targeting source. Both objective study and subjective study show the proposed system can accurately decode the attention and significantly improve the user experience

Acoustic sensor network geometry calibration and applications

In the modern world, we are increasingly surrounded by computation devices with communication links and one or more microphones. Such devices are, for example, smartphones, tablets, laptops or hearing aids. These devices can work together as nodes in an acoustic sensor network (ASN). Such networks are a growing platform that opens the possibility for many practical applications. ASN based speech enhancement, source localization, and event detection can be applied for teleconferencing, camera control, automation, or assisted living. For this kind of applications, the awareness of auditory objects and their spatial positioning are key properties. In order to provide these two kinds of information, novel methods have been developed in this thesis. Information on the type of auditory objects is provided by a novel real-time sound classification method. Information on the position of human speakers is provided by a novel localization and tracking method. In order to localize with respect to the ASN, the relative arrangement of the sensor nodes has to be known. Therefore, different novel geometry calibration methods were developed. Sound classification The first method addresses the task of identification of auditory objects. A novel application of the bag-of-features (BoF) paradigm on acoustic event classification and detection was introduced. It can be used for event and speech detection as well as for speaker identification. The use of both mel frequency cepstral coefficient (MFCC) and Gammatone frequency cepstral coefficient (GFCC) features improves the classification accuracy. By using soft quantization and introducing supervised training for the BoF model, superior accuracy is achieved. The method generalizes well from limited training data. It is working online and can be computed in a fraction of real-time. By a dedicated training strategy based on a hierarchy of stationarity, the detection of speech in mixtures with noise was realized. This makes the method robust against severe noises levels corrupting the speech signal. Thus it is possible to provide control information to a beamformer in order to realize blind speech enhancement. A reliable improvement is achieved in the presence of one or more stationary noise sources. Speaker localization The localization method enables each node to determine the direction of arrival (DoA) of concurrent sound sources. The author's neuro-biologically inspired speaker localization method for microphone arrays was refined for the use in ASNs. By implementing a dedicated cochlear and midbrain model, it is robust against the reverberation found in indoor rooms. In order to better model the unknown number of concurrent speakers, an application of the EM algorithm that realizes probabilistic clustering according to auditory scene analysis (ASA) principles was introduced. Based on this approach, a system for Euclidean tracking in ASNs was designed. Each node applies the node wise localization method and shares probabilistic DoA estimates together with an estimate of the spectral distribution with the network. As this information is relatively sparse, it can be transmitted with low bandwidth. The system is robust against jitter and transmission errors. The information from all nodes is integrated according to spectral similarity to correctly associate concurrent speakers. By incorporating the intersection angle in the triangulation, the precision of the Euclidean localization is improved. Tracks of concurrent speakers are computed over time, as is shown with recordings in a reverberant room. Geometry calibration The central task of geometry calibration has been solved with special focus on sensor nodes equipped with multiple microphones. Novel methods were developed for different scenarios. An audio-visual method was introduced for the calibration of ASNs in video conferencing scenarios. The DoAs estimates are fused with visual speaker tracking in order to provide sensor positions in a common coordinate system. A novel acoustic calibration method determines the relative positioning of the nodes from ambient sounds alone. Unlike previous methods that only infer the positioning of distributed microphones, the DoA is incorporated and thus it becomes possible to calibrate the orientation of the nodes with a high accuracy. This is very important for all applications using the spatial information, as the triangulation error increases dramatically with bad orientation estimates. As speech events can be used, the calibration becomes possible without the requirement of playing dedicated calibration sounds. Based on this, an online method employing a genetic algorithm with incremental measurements was introduced. By using the robust speech localization method, the calibration is computed in parallel to the tracking. The online method is be able to calibrate ASNs in real time, as is shown with recordings of natural speakers in a reverberant room. The informed acoustic sensor network All new methods are important building blocks for the use of ASNs. The online methods for localization and calibration both make use of the neuro-biologically inspired processing in the nodes which leads to state-of-the-art results, even in reverberant enclosures. The high robustness and reliability can be improved even more by including the event detection method in order to exclude non-speech events. When all methods are combined, both semantic information on what is happening in the acoustic scene as well as spatial information on the positioning of the speakers and sensor nodes is automatically acquired in real time. This realizes truly informed audio processing in ASNs. Practical applicability is shown by application to recordings in reverberant rooms. The contribution of this thesis is thus not only to advance the state-of-the-art in automatically acquiring information on the acoustic scene, but also pushing the practical applicability of such methods

Robust speech recognition with spectrogram factorisation

Communication by speech is intrinsic for humans. Since the breakthrough of mobile devices and wireless communication, digital transmission of speech has become ubiquitous. Similarly distribution and storage of audio and video data has increased rapidly. However, despite being technically capable to record and process audio signals, only a fraction of digital systems and services are actually able to work with spoken input, that is, to operate on the lexical content of speech. One persistent obstacle for practical deployment of automatic speech recognition systems is inadequate robustness against noise and other interferences, which regularly corrupt signals recorded in real-world environments. Speech and diverse noises are both complex signals, which are not trivially separable. Despite decades of research and a multitude of different approaches, the problem has not been solved to a sufficient extent. Especially the mathematically ill-posed problem of separating multiple sources from a single-channel input requires advanced models and algorithms to be solvable. One promising path is using a composite model of long-context atoms to represent a mixture of non-stationary sources based on their spectro-temporal behaviour. Algorithms derived from the family of non-negative matrix factorisations have been applied to such problems to separate and recognise individual sources like speech. This thesis describes a set of tools developed for non-negative modelling of audio spectrograms, especially involving speech and real-world noise sources. An overview is provided to the complete framework starting from model and feature definitions, advancing to factorisation algorithms, and finally describing different routes for separation, enhancement, and recognition tasks. Current issues and their potential solutions are discussed both theoretically and from a practical point of view. The included publications describe factorisation-based recognition systems, which have been evaluated on publicly available speech corpora in order to determine the efficiency of various separation and recognition algorithms. Several variants and system combinations that have been proposed in literature are also discussed. The work covers a broad span of factorisation-based system components, which together aim at providing a practically viable solution to robust processing and recognition of speech in everyday situations

Machine Learning for Beamforming in Audio, Ultrasound, and Radar

Multi-sensor signal processing plays a crucial role in the working of several everyday technologies, from correctly understanding speech on smart home devices to ensuring aircraft fly safely. A specific type of multi-sensor signal processing called beamforming forms a central part of this thesis. Beamforming works by combining the information from several spatially distributed sensors to directionally filter information, boosting the signal from a certain direction but suppressing others. The idea of beamforming is key to the domains of audio, ultrasound, and radar. Machine learning is the other central part of this thesis. Machine learning, and especially its sub-field of deep learning, has enabled breakneck progress in tackling several problems that were previously thought intractable. Today, machine learning powers many of the cutting edge systems we see on the internet for image classification, speech recognition, language translation, and more. In this dissertation, we look at beamforming pipelines in audio, ultrasound, and radar from a machine learning lens and endeavor to improve different parts of the pipelines using ideas from machine learning. We start off in the audio domain and derive a machine learning inspired beamformer to tackle the problem of ensuring the audio captured by a camera matches its visual content, a problem we term audiovisual zooming. Staying in the audio domain, we then demonstrate how deep learning can be used to improve the perceptual qualities of speech by denoising speech clipping, codec distortions, and gaps in speech. Transitioning to the ultrasound domain, we improve the performance of short-lag spatial coherence ultrasound imaging by exploiting the differences in tissue texture at each short lag value by applying robust principal component analysis. Next, we use deep learning as an alternative to beamforming in ultrasound and improve the information extraction pipeline by simultaneously generating both a segmentation map and B-mode image of high quality directly from raw received ultrasound data. Finally, we move to the radar domain and study how deep learning can be used to improve signal quality in ultra-wideband synthetic aperture radar by suppressing radio frequency interference, random spectral gaps, and contiguous block spectral gaps. By training and applying the networks on raw single-aperture data prior to beamforming, it can work with myriad sensor geometries and different beamforming equations, a crucial requirement in synthetic aperture radar

Principled methods for mixtures processing

This document is my thesis for getting the habilitation à diriger des recherches, which is the french diploma that is required to fully supervise Ph.D. students. It summarizes the research I did in the last 15 years and also provides the short­term research directions and applications I want to investigate. Regarding my past research, I first describe the work I did on probabilistic audio modeling, including the separation of Gaussian and α­stable stochastic processes. Then, I mention my work on deep learning applied to audio, which rapidly turned into a large effort for community service. Finally, I present my contributions in machine learning, with some works on hardware compressed sensing and probabilistic generative models.My research programme involves a theoretical part that revolves around probabilistic machine learning, and an applied part that concerns the processing of time series arising in both audio and life sciences

Inverse Problem Formulation and Deep Learning Methods for Ultrasound Beamforming and Image Reconstruction

Ultrasound imaging is among the most common medical imaging modalities, which has the advantages of being real-time, non-invasive, cost-effective, and portable. Medical ultrasound images, however, have low values of signal-to-noise ratio due to many factors, and there has been a long-standing line of research on improving the quality of ultrasound images. Ultrasound transducers are made from piezoelectric elements, which are responsible for the insonification of the medium with non-invasive acoustic waves and also the reception of backscattered signals. Design optimizations span all steps of the image formation pipeline, including system architecture, hardware development, and software algorithms. Each step entails parameter optimizations and trade-offs in order to achieve a balance in competing effects such as cost, performance, and efficiency. The current thesis is devoted to research on image reconstruction techniques in order to push forward the classical limitations. It is tried not to be restricted into a specific class of computational imaging or machine learning method. As such, classical approaches and recent methods based on deep learning are adapted according to the requirements and limitations of the image reconstruction problem. In other words, we aim to reconstruct a high-quality spatial map of the medium echogenicity from raw channel data received from piezoelectric elements. All other steps of the ultrasound image formation pipeline are considered fixed, and the goal is to extract the best possible image quality (in terms of resolution, contrast, speckle pattern, etc.) from echo traces acquired by transducer elements. Two novel approaches are proposed on super-resolution ultrasound imaging by training deep models that create mapping functions from observations recorded from a single transmission to high-quality images. These models are mainly developed to resolve the necessity of several transmissions, which can potentially be used in applications that require both high framerate and image quality. The remaining four contributions are on beamforming, which is an essential step in medical ultrasound image reconstruction. Different approaches, including independent component analysis, deep learning, and inverse problem formulations, are utilized to tackle the ill-posed inverse problem of receive beamforming. The primary goal of novel beamformers is to find a solution to the trade-off between image quality and framerate. The final chapter consists of concluding remarks on each of our contributions, where the strengths and weaknesses of our proposed techniques based on classical computational imaging and deep learning methods are outlined. There is still a large room for improvement in all of our proposed techniques, and the thesis is concluded by providing avenues for future research to attain those improvements