A novel hybrid teaching learning based multi-objective particle swarm optimization

How to obtain a good convergence and well-spread optimal Pareto front is still a major challenge for most meta-heuristic multi-objective optimization (MOO) methods. In this paper, a novel hybrid teaching learning based particle swarm optimization (HTL-PSO) with circular crowded sorting (CCS), named HTL-MOPSO, is proposed for solving MOO problems. Specifically, the new HTL-MOPSO combines the canonical PSO search with a teaching-learning-based optimization (TLBO) algorithm in order to promote the diversity and improve search ability. Also, CCS technique is developed to improve the diversity and spread of solutions when truncating the external elitism archive. The performance of HTL-MOPSO algorithm was tested on several well-known benchmarks problems and compared with other state-of-the-art MOO algorithms in respect of convergence and spread of final solutions to the true Pareto front. Also, the individual contributions made by the strategies of HTL-PSO and CCS are analyzed. Experimental results validate the effectiveness of HTL-MOPSO and demonstrate its superior ability to find solutions of better spread and diversity, while assuring a good convergence

Comparison between five stochastic global search algorithms for optimizing thermoelectric generator designs

In this study, the best settings of five heuristics are determined for solving a mixed-integer non-linear multi-objective optimization problem. The algorithms treated in the article are: ant colony optimization, genetic algorithm, particle swarm optimization, differential evolution, and teaching-learning basic algorithm. The optimization problem consists in optimizing the design of a thermoelectric device, based on a model available in literature. Results showed that the inner settings can have different effects on the algorithm performance criteria depending on the algorithm. A formulation based on the weighted sum method is introduced for solving the multiobjective optimization problem with optimal settings. It was found that the five heuristic algorithms have comparable performances. Differential evolution generated the highest number of non-dominated solutions in comparison with the other algorithms

Sampling CAD models via an extended teaching–learning-based optimization technique

The Teaching–Learning-Based Optimization (TLBO) algorithm of Rao et al. has been presented in recent years, which is a population-based algorithm and operates on the principle of teaching and learning. This algorithm is based on the influence of a teacher on the quality of learners in a population. In this study, TLBO is extended for constrained and unconstrained CAD model sampling which is called Sampling-TLBO (S-TLBO). Sampling CAD models in the design space can be useful for both designers and customers during the design stage. A good sampling technique should generate CAD models uniformly distributed in the entire design space so that designers or customers can well understand possible design options. To sample designs in a predefined design space, sub-populations are first generated each of which consists of separate learners. Teaching and learning phases are applied for each sub-population one by one which are based on a cost (fitness) function. Iterations are performed until change in the cost values becomes negligibly small. Teachers of each sub-population are regarded as sampled designs after the application of S-TLBO. For unconstrained design sampling, the cost function favors the generation of space-filling and Latin Hypercube designs. Space-filling is achieved using the Audze and Eglais’ technique. For constrained design sampling, a static constraint handling mechanism is utilized to penalize designs that do not satisfy the predefined design constraints. Four CAD models, a yacht hull, a wheel rim and two different wine glasses, are employed to validate the performance of the S-TLBO approach. Sampling is first done for unconstrained design spaces, whereby the models obtained are shown to users in order to learn their preferences which are represented in the form of geometric constraints. Samples in constrained design spaces are then generated. According to the experiments in this study, S-TLBO outperforms state-of-the-art techniques particularly when a high number of samples are generated

Optimisation sous contrainte d'un générateur thermoélectrique pour la récupération de chaleur par différents algorithmes heuristiques

La présente étude porte sur le développement et l’optimisation d’un modèle de générateur thermoélectrique placé sur la surface d’une source de chaleur. La particularité de ce modèle est que la source de chaleur est sujette à un flux de chaleur et à une température de surface fixes. L’objectif principal est de développer un modèle de générateur thermoélectrique d’intérêt dans ce contexte particulier qui pourra s’adapter à différentes sources de chaleur et qui pourra inclure différents systèmes de refroidissement. Le modèle a été créé intégralement à l’aide du logiciel Matlab. Un algorithme génétique multi objectif est ensuite utilisé comme outil d’optimisation afin de maximiser les performances tout en minimisant les coûts du générateur thermoélectrique. Les objectifs d’optimisation proposés sont donc de maximiser la puissance électrique et de minimiser le nombre de modules. Lorsqu’un collecteur thermique est inclus au système, il est aussi nécessaire de minimiser la puissance de pompage et l’aire totale d’échange du collecteur. Une première étude considère uniquement la puissance comme objectif d’optimisation afin d’observer l’impact des contraintes de température et de flux de chaleur de la source sur les designs optimaux. Des cas multiobjectifs seront ensuite étudiés avec les différents objectifs énoncés. Finalement, les performances de différents algorithmes d’optimisation heuristiques seront comparées entre eux en utilisant le modèle thermoélectrique développé comme banc d'essai. Les forces et faiblesses de chaque algorithme seront analysées selon divers critères de performance, lorsqu’appliqués à un cas d’optimisation complexe.This study presents a model of a thermoelectric generator placed directly on the surface of a heat source. One unique feature of this model is that the heat source is subject to fixed heat flux and surface temperature that the system must respect. The main objective is to develop this model in this particular context with the possibility to be adapted to any heat source and the option to add a cooling system. The model has been developed entirely on the software Matlab. Then, a genetic algorithm is used to perform an optimisation in order to find the design with the maximal power output and minimal number of thermoelectric modules. With the cooling system included, the total surface of exchange and pumping power is also considered. A preliminary analysis is conducted to analyse the impact of the heat flux and surface temperature constraint on such system. Thereafter, a multi-objective optimisation is performed to find the optimal design considering multiple optimisation objectives. Finally, different heuristic algorithms are compared for solving the thermoelectric model proposed. The performance is discussed using different performance criteria to show the pros and cons of each heuristic algorithm when solving a complex optimisation design problem

Experimental Investigations on Machining of CFRP Composites: Study of Parametric Influence and Machining Performance Optimization

Carbon Fiber Reinforced Polymer (CFRP) composites are characterized by their excellent mechanical properties (high specific strength and stiffness, light weight, high damping capacity etc.) as compared to conventional metals, which results in their increased utilization especially for aircraft and aerospace applications, automotive, defense as well as sporting industries. With increasing applications of CFRP composites, determining economical techniques of production is very important. However, as compared to conventional metals, machining behavior of composites is somewhat different. This is mainly because these materials behave extremely abrasive during machining operations. Machining of CFRP appears difficult due to their material discontinuity, inhomogeneity and anisotropic nature. Moreover, the machining behavior of composites largely depends on the fiber form, the fiber content, fiber orientations of composites and the variability of matrix material. Difficulties are faced during machining of composites due to occurrence of various modes of damages like fiber breakage, matrix cracking, fiber–matrix debonding and delamination. Hence, adequate knowledge and in-depth understanding of the process behavior is indeed necessary to identify the most favorable machining environment in view of various requirements of process performance yields. In this context, present work attempts to investigate aspects of machining performance optimization during machining (turning and drilling) of CFRP composites. In case of turning experiments, the following parameters viz. cutting force, Material Removal Rate (MRR), roughness average (Ra) and maximum tool-tip temperature generated during machining have been considered as process output responses. In case of drilling, the following process performance features viz. load (thrust), torque, roughness average (of the drilled hole) and delamination factor (entry and exit both) have been considered. Attempt has been made to determine the optimal machining parameters setting that can simultaneously satisfy aforesaid response features up to the desired extent. Using Fuzzy Inference System (FIS), multiple response features have been aggregated to obtain an equivalent single performance index called Multi-Performance Characteristic Index (MPCI). A nonlinear regression model has been established in which MPCI has been represented as a function of the machining parameters under consideration. The aforesaid regression model has been considered as the fitness function, and finally optimized by evolutionary algorithms like Harmony Search (HS), Teaching-Learning Based Optimization (TLBO), and Imperialist Competitive Algorithm (ICA) etc. However, the limitation of these algorithms is that they assume a continuous search within parametric domain. These algorithms can give global optima; but the predicted optimal setting may not be possible to adjust in the machine/setup. Since, in most of the machines/setups, provision is given only to adjust factors (process input parameters) at some discrete levels. On the contrary, Taguchi method is based on discrete search philosophy in which predicted optimal setting can easily be achieved in reality.However, Taguchi method fails to solve multi-response optimization problems. Another important aspect that comes into picture while dealing with multi-response optimization problems is the existence of response correlation. Existing Taguchi based integrated optimization approaches (grey-Taguchi, utility-Taguchi, desirability function based Taguchi, TOPSIS, MOORA etc.) may provide erroneous outcome unless response correlation is eliminated. To get rid of that, the present work proposes a PCA-FuzzyTaguchi integrated optimization approach for correlated multi-response optimization in the context of machining CFRP composites. Application potential of aforementioned approach has been compared over various evolutionary algorithms