Review on auto-depth control system for an unmanned underwater remotely operated vehicle (ROV) using intelligent controller

This paper presents a review of auto-depth control system for an Unmanned Underwater Remotely operated Vehicle (ROV), focusing on the Artificial Intelligent Controller Techniques. Specifically, Fuzzy Logic Controller (FLC) is utilized in auto-depth control system for the ROV. This review covered recently published documents for auto-depth control of an Unmanned Underwater Vehicle (UUV). This paper also describes the control issues in UUV especially for the ROV, which has inspired the authors to develop a new technique for auto-depth control of the ROV, called the SIFLC. This technique was the outcome of an investigation and tuning of two parameters, namely the break point and slope for the piecewise linear or slope for the linear approximation. Hardware comparison of the same concepts of ROV design was also discussed. The ROV design is for smallscale, open frame and lower speed. The review on auto-depth control system for ROV, provides insights for readers to design new techniques and algorithms for auto-depth control

Optimization of an Intelligent Controller for an Unmanned Underwater Vehicle

 Underwater environment poses a difficult challenge for autonomous underwater navigation. A standard problem of underwater vehicles is to maintain it position at a certain depth in order to perform desired operations. An effective controller is required for this purpose and hence the design of a depth controller for an unmanned underwater vehicle is described in this paper. The control algorithm is simulated by using the marine guidance navigation and control simulator. The project shows a radial basis function metamodel can be used to tune the scaling factors of a fuzzy logic controller. By using offline optimization approach, a comparison between genetic algorithm and metamodeling has been done to minimize the integral square error between the set point and the measured depth of the underwater vehicle. The results showed that it is possible to obtain a reasonably good error using metamodeling approach in much a shorter time compared to the genetic algorithm approach

Adaptive simplified fuzzy logic controller for depth control of underwater remotely operated vehicle

A Remotely Operated Vehicle (ROV) is one class of the unmanned underwater vehicles that is tethered, unoccupied, highly manoeuvrable, and operated by a person on a platform on water surface. For depth control of ROV, an occurrence of overshoot in the system response is highly dangerous. Clearly an overshoot in the ROV vertical trajectory may cause damages to both the ROV and the inspected structure. Maintaining the position of a small scale ROV within its working area is difficult even for experienced ROV pilots, especially in the presence of underwater currents and waves. This project, focuses on controlling the ROV vertical trajectory as the ROV tries to remain stationary on the desired depth and having its overshoot, rise time and settling time minimized. This project begins with a mathematical and empirical modelling to capture the dynamics of a newly fabricated ROV, followed by an intelligent controller design for depth control of ROV based on the Single Input Fuzzy Logic Controller (SIFLC). Factors affecting the SIFLC were investigated including changing the number of rules, using a linear equation instead of a lookup table and adding a reference model. The parameters of the SIFLC were tuned by an improved Particle Swarm Optimization (PSO) algorithm. A novel adaptive technique called the Adaptive Single Input Fuzzy Logic Controller (ASIFLC) was introduced that has the ability to adapt its parameters depending on the depth set point used. The algorithm was verified in MATLAB® Simulink platform. Then, verified algorithms were tested on an actual prototype ROV in a water tank. Results show it was found that the technique can effectively control the depth of ROV with no overshoot and having its settling time minimized. Since the algorithm can be represented using simple mathematical equations, it can easily be realized using low cost microcontrollers

Review on Auto-Depth Control System for an Unmanned Underwater Remotely Operated Vehicle (ROV) using Intelligent Controller

This paper presents a review of auto-depth control system for an Unmanned Underwater Remotely operated Vehicle (ROV), focusing on the Artificial Intelligent Controller Techniques. Specifically, Fuzzy Logic Controller (FLC) is utilized in auto-depth control system for the ROV. This review covered recently published documents for auto-depth control of an Unmanned Underwater Vehicle (UUV). This paper also describes the control issues in UUV especially for the ROV, which has inspired the authors to develop a new technique for auto-depth control of the ROV, called the SIFLC. This technique was the outcome of an investigation and tuning of two parameters, namely the break point and slope for the piecewise linear or slope for the linear approximation. Hardware comparison of the same concepts of ROV design was also discussed. The ROV design is for smallscale, open frame and lower speed. The review on auto-depth control system for ROV, provides insights for readers to design new techniques and algorithms for auto-depth contro

Review on Auto-Depth Control System for an Unmanned Underwater Remotely Operated Vehicle (ROV) using Intelligent Controller

This paper presents a review of auto-depth control system for an Unmanned Underwater Remotely operated Vehicle (ROV), focusing on the Artificial Intelligent Controller Techniques. Specifically, Fuzzy Logic Controller (FLC) is utilized in auto-depth control system for the ROV. This review covered recently published documents for auto-depth control of an Unmanned Underwater Vehicle (UUV). This paper also describes the control issues in UUV especially for the ROV, which has inspired the authors to develop a new technique for auto-depth control of the ROV, called the SIFLC. This technique was the outcome of an investigation and tuning of two parameters, namely the break point and slope for the piecewise linear or slope for the linear approximation. Hardware comparison of the same concepts of ROV design was also discussed. The ROV design is for smallscale, open frame and lower speed. The review on auto-depth control system for ROV, provides insights for readers to design new techniques and algorithms for auto-depth contro

A small perturbation based optimization approach for the frequency placement of high aspect ratio wings

Design denotes the transformation of an identified need to its physical embodiment in a traditionally iterative approach of trial and error. Conceptual design plays a prominent role but an almost infinite number of possible solutions at the outset of design necessitates fast evaluations. The traditional practice of empirical databases loses adequacy for novel concepts and an ever increasing system complexity and resource scarsity mandate new approaches to adequately capture system characteristics. Contemporary concerns in atmospheric science and homeland security created an operational need for unconventional configurations. Unmanned long endurance flight at high altitudes offers a unique showcase for the exploration of new design spaces and the incidental deficit of conceptual modeling and simulation capabilities. The present research effort evolves around the development of an efficient and accurate optimization algorithm for high aspect ratio wings subject to natural frequency constraints. Foundational corner stones are beam dimensional reduction and modal perturbation redesign. Local and global analyses inherent to the former suggest corresponding levels of local and global optimization. The present approach departs from this suggestion. It introduces local level surrogate models to capacitate a methodology that consists of multi level analyses feeding into a single level optimization. The innovative heart of the new algorithm originates in small perturbation theory. A sequence of small perturbation solutions allows the optimizer to make incremental movements within the design space. It enables a directed search that is free of costly gradients. System matrices are decomposed based on a Timoshenko stiffness effect separation. The formulation of respective linear changes falls back on surrogate models that approximate cross sectional properties. Corresponding functional responses are readily available. Their direct use by the small perturbation based optimizer ensures constitutive laws and eliminates a previously necessary optimization at the local level. The great economy of the developed algorithm makes it suitable for the conceptual phase of aircraft design.Ph.D.Committee Chair: Mavris, Dimitri; Committee Member: Bauchau, Olivier; Committee Member: Schrage, Daniel; Committee Member: Volovoi, Vitali; Committee Member: Yu, Wenbi

Armstrong Research, Technology, and Engineering Accomplishments 2014

No abstract availabl

Armstrong Flight Research Center Research Technology and Engineering Report 2015

I am honored to endorse the 2015 Neil A. Armstrong Flight Research Centers Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Centers agility to develop technologies supporting each of NASAs core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASAs mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Dont hesitate to contact them for more information or for collaboration ideas

Comments on the Use of 3D Printing Technology in the Design of an AUV Destined for the Identification and Destruction of Underwater Mines

The International Maritime Organization and the North Atlantic Treaty Organization are today, enforcing increasingly stringent rules for maritime safety and security on a national and international scale. The need for security in the Black Sea has increased, the degree of danger has risen, and the risk of loss of life and destruction of ships or other surface or submersible marine vehicles cannot be overlooked. Autonomous underwater vehicles (AUVs) have various civil applications (targeting economic, industrial, and commercial interests), but military applications have recently gained prominence (needs for information, surveillance, and inspection, for the identification and destruction of risk obstacles). Given the high risk of destruction during the operation, solutions are being sought to enable the rapid and cost-free construction of AUVs without compromising their performance and efficiency. The paper's novelty is provided by the mention of 3D printing technologies as a possible solution, taking into account the successes in other essential fields of science and technology. The contribution of the paper was related to the AUV's body extremities (bow and stern), and the following factors were considered: geometric design using computer-aided design methods; hydrodynamic analysis of forms using computational fluid dynamics methods; and prototype manufacturing using 3D printing

Intelligent Control System of Fire-Extinguishing and Obstacle-Avoiding Hexapod Robot

This hexapod fire extinguisher robot is constructed based on technological developments evolving very rapidly, especially in the field of robotics technology. The hexapod robot has become a big concern in the development of robotics technology with many existing contests of hexapod robot. This hexapod fire extinguisher robot is designed based on Fuzzy Mamdani Logic. The navigation of fire extinguisher hexapod robot is based on distance detection with ultrasonic sensor determining the movement of robot’s legs utilizing Fuzzy Logic. A fire extinguisher hexapod robot will explore a tunnel arena having several rooms created for the robot to explore. This hexapod robot uses Arduino as a microcontroller and uses 18 servo motors in which each foot requires 3 servo motors. Moreover, good navigation will be aimed by utilizing Fuzzy Logic in the hexapod robot design. The application of many rules on Fuzzy Logic makes the better navigation; furthermore, the results present the ultrasonic sensor having an average error of 1.256%, the Fuzzy Logic applied showing 0% error, and the overall success rate presenting approximately 80%