A Proposal for a Multi-Drive Heterogeneous Modular Pipe- Inspection Micro-Robot

This paper presents the architecture used to develop a micro-robot for narrow pipes inspection. Both the electromechanical design and the control scheme will be described. In pipe environments it is very useful to have a method to retrieve information of the state of the inside part of the pipes in order to detect damages, breaks and holes. Due to the di_erent types of pipes that exists, a modular approach with di_erent types of modules has been chosen in order to be able to adapt to the shape of the pipe and to chose the most appropriate gait. The micro-robot has been designed for narrow pipes, a _eld in which there are not many prototypes. The robot incorporates a camera module for visual inspection and several drive modules for locomotion and turn (helicoidal, inchworm, two degrees of freedom rotation). The control scheme is based on semi-distributed behavior control and is also described. A simulation environment is also presented for prototypes testing

Characterisation of a nuclear cave environment utilising an autonomous swarm of heterogeneous robots

As nuclear facilities come to the end of their operational lifetime, safe decommissioning becomes a more prevalent issue. In many such facilities there exist ‘nuclear caves’. These caves constitute areas that may have been entered infrequently, or even not at all, since the construction of the facility. Due to this, the topography and nature of the contents of these nuclear caves may be unknown in a number of critical aspects, such as the location of dangerous substances or significant physical blockages to movement around the cave. In order to aid safe decommissioning, autonomous robotic systems capable of characterising nuclear cave environments are desired. The research put forward in this thesis seeks to answer the question: is it possible to utilise a heterogeneous swarm of autonomous robots for the remote characterisation of a nuclear cave environment? This is achieved through examination of the three key components comprising a heterogeneous swarm: sensing, locomotion and control. It will be shown that a heterogeneous swarm is not only capable of performing this task, it is preferable to a homogeneous swarm. This is due to the increased sensory and locomotive capabilities, coupled with more efficient explorational prowess when compared to a homogeneous swarm

Parallel Platform-Based Robot for Operation in Active Water Pipes

This thesis presents a novel design for a pipe inspection robot. The main aim of the design has been to allow the robot to operate in a water pipe while it is still in service. Water pipes form a very crucial part of the infrastructure of the world we live in today. Despite their importance, water leakage is a major problem suffered by water companies worldwide, costing them billions of dollars every year. There are a wide variety of different techniques used for leak detection and localisation, but no one method is capable of accurately pinpointing the leak location and severity in all pipe conditions with minimal labour. A survey of existing pipe inspection robots showed that there have been many designs implemented that are capable of navigating the pipeline environment. However, none of these were capable of fully autonomous control in a live water pipe. It was concluded that an autonomous pipe inspection robot capable of working in active pipelines would be of great industrial benefit as it would be able to carry a wide range of sensors directly to the source of the leak with minimal, if any, human intervention. An inchworm robot prototype was constructed based on a Gough-Stewart parallel platform. The robot’s inverse kinematics equations were derived and a simulation model of the robot was constructed. These were verified using a motion capture suite, confirming that they are valid representations of the robot. The simulation was used to determine the robot’s movement limitations and minimum bend radius it could navigate. Several CFD simulations were carried out in order to estimate the maximum fluid force exerted on the robot. It was found that the robot’s design successfully minimised the fluid force such that off-the-shelf actuators had the capability to overcome it. The prototype was successfully tested in both a straight and bent pipe, demonstrating its ability to navigate a dry pipe environment. Overall, the robot prototype served as a successful proof of concept for a design of pipe inspection robot that would be capable of operating in active pipelines

Bio-Inspired Robotics

Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is to draw inspiration from biological systems. Biological structure, mechanisms, and underlying principles have the potential to provide new ideas to support the improvement of conventional robotic designs and control. Such biological principles usually originate from animal or even plant models, for robots, which can sense, think, walk, swim, crawl, jump or even fly. Thus, it is believed that these bio-inspired methods are becoming increasingly important in the face of complex applications. Bio-inspired robotics is leading to the study of innovative structures and computing with sensory–motor coordination and learning to achieve intelligence, flexibility, stability, and adaptation for emergent robotic applications, such as manipulation, learning, and control. This Special Issue invites original papers of innovative ideas and concepts, new discoveries and improvements, and novel applications and business models relevant to the selected topics of ``Bio-Inspired Robotics''. Bio-Inspired Robotics is a broad topic and an ongoing expanding field. This Special Issue collates 30 papers that address some of the important challenges and opportunities in this broad and expanding field

Cumulative index to NASA Tech Briefs, 1986-1990, volumes 10-14

Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This cumulative index of Tech Briefs contains abstracts and four indexes (subject, personal author, originating center, and Tech Brief number) and covers the period 1986 to 1990. The abstract section is organized by the following subject categories: electronic components and circuits, electronic systems, physical sciences, materials, computer programs, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

NASA Tech Briefs, September 1992

Topics include: Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences