Monitoring and Fault Location Sensor Network for Underground Distribution Lines

One of the fundamental tasks of electric distribution utilities is guaranteeing a continuous supply of electricity to their customers. The primary distribution network is a critical part of these facilities because a fault in it could affect thousands of customers. However, the complexity of this network has been increased with the irruption of distributed generation, typical in a Smart Grid and which has significantly complicated some of the analyses, making it impossible to apply traditional techniques. This problem is intensified in underground lines where access is limited. As a possible solution, this paper proposes to make a deployment of a distributed sensor network along the power lines. This network proposes taking advantage of its distributed character to support new approaches of these analyses. In this sense, this paper describes the aquiculture of the proposed network (adapted to the power grid) based on nodes that use power line communication and energy harvesting techniques. In this sense, it also describes the implementation of a real prototype that has been used in some experiments to validate this technological adaptation. Additionally, beyond a simple use for monitoring, this paper also proposes the use of this approach to solve two typical distribution system operator problems, such as: fault location and failure forecasting in power cables.Ministerio de Economía y Competitividad, Government of Spain project Sistema Inteligente Inalámbrico para Análisis y Monitorización de Líneas de Tensión Subterráneas en Smart Grids (SIIAM) TEC2013-40767-RMinisterio de Educación, Cultura y Deporte, Government of Spain, for the funding of the scholarship Formación de Profesorado Universitario 2016 (FPU 2016

Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

Flexible protection architectures using distributed optical sensors

In this paper we describe recent developments in flexible protection schemes that make use of passive fibre Bragg grating (FBG) based transducers for the distributed measurement of voltage and current. The technology underpinning the passive optical approach is described in detail, and both the present development and the future potential of the approach are discussed. In co-operation with Toshiba, the integration of the technique with an existing busbar protection relay is demonstrated, illustrating the flexibility offered by protection schemes that are based on the use of small, passive, multiplexable, dielectric transducers

New Cost-effective Method for Monitoring Wideband Disturbances at Secondary Substation

Modern societies are becoming increasingly dependent on reliable and continuous supply of high quality electricity. Maintaining continuous supply of electricity round the clock depends heavily on the efficient and reliable operation of distribution system components. On the other hand, large-scale power outages are increasing in overhead lines due to extreme weather condition i.e. heavy storms and snowfalls. Distribution network operators (DNOs) are facing considerable network investments in the near future due to the ongoing trend of cabling. At the same time, the long fault location and repair times in aging cable networks set new demands for condition monitoring and fault prevention through preventive maintenance. Partial discharge (PD) monitoring is an excellent way to determine the overall health of the MV components and detect developing faults in underground cables. On the other hand, the proliferation of e.g. distributed generation and electronic loads poses new challenges to maintain the power quality (PQ) in distribution networks. Utilizing network condition and power quality information together would improve the allocation accuracy and benefit-cost ratio of network maintenance and renewals. Thus, the importance of condition monitoring is increasing in the distribution networks to facilitate online diagnostic, preventive maintenance, forecasting risk of failure and minimizing outages.Secondary substations seldom have any remotely readable measurement and control units and the existing measurements in the network are limited to only power quality and MV fault management due to low sampling rate (some kHz). There are also commercially available devices for PD monitoring of underground cables but those capable of continuous on-line monitoring are still relatively expensive and as such, more suited for critical and high risk location. Currently, there are no cost-effective wideband multifunction devices suitable for continuous on-line PD monitoring, PQ monitoring, disturbance recording (DR) and fault location at secondary substation.This thesis proposes a novel cost-effective secondary substation monitoring solution which includes the monitoring system as well as the monitoring concept to measure various quantities at LV and MV side of secondary substation. Additionally, it can be used in fundamental frequency metering and can be used as disturbance recorder as well. It also locates earth fault which is demonstrated as an application of disturbance recording function. The architecture of the monitoring system includes high frequency current transformer (HFCT) sensors for current measurements at MV side, resistive divider for voltage measurements at LV side, filter & amplifier unit and multichannel data acquisition & processing unit. HFCT sensors not only measure PD but also PQ at the MV side of secondary substation, which is a novel approach. Hence, no sensor having expensive high voltage insulations is needed, which makes the solution cost-effective and reliable. The overall concept is tested and verified through prototype systems in the laboratory and in the field. Secondary substation monitoring solution provides a platform on which various monitoring, control and network automation applications can be built

Distributed photonic instrumentation for smart grids

Photonic sensor networks possess the unique potential to provide the instrumentation infrastructure required in future smart grids by simultaneously addressing the issues of metrology and communications. In contrast to established optical CT/VT technology, recent developments at the University of Strathclyde in distributed point sensors for electrical and mechanical parameters demonstrate an enormous potential for realizing novel and effective monitoring and protection strategies for intelligent electrical networks and systems. In this paper, we review this technology and its capabilities, and describe recent work in power system monitoring and protection using hybrid electro-optical sensors. We show that wide-area visibility of multiple electrical and mechanical parameters from a single central location may be achieved using this technology, and discuss the implications for smart grid instrumentation

Automation of the longwall mining system

Cost effective, safe, and technologically sound applications of automation technology to underground coal mining were identified. The longwall analysis commenced with a general search for government and industry experience of mining automation technology. A brief industry survey was conducted to identify longwall operational, safety, and design problems. The prime automation candidates resulting from the industry experience and survey were: (1) the shearer operation, (2) shield and conveyor pan line advance, (3) a management information system to allow improved mine logistics support, and (4) component fault isolation and diagnostics to reduce untimely maintenance delays. A system network analysis indicated that a 40% improvement in productivity was feasible if system delays associated with all of the above four areas were removed. A technology assessment and conceptual system design of each of the four automation candidate areas showed that state of the art digital computer, servomechanism, and actuator technologies could be applied to automate the longwall system

A Review of Fault Diagnosing Methods in Power Transmission Systems

Transient stability is important in power systems. Disturbances like faults need to be segregated to restore transient stability. A comprehensive review of fault diagnosing methods in the power transmission system is presented in this paper. Typically, voltage and current samples are deployed for analysis. Three tasks/topics; fault detection, classification, and location are presented separately to convey a more logical and comprehensive understanding of the concepts. Feature extractions, transformations with dimensionality reduction methods are discussed. Fault classification and location techniques largely use artificial intelligence (AI) and signal processing methods. After the discussion of overall methods and concepts, advancements and future aspects are discussed. Generalized strengths and weaknesses of different AI and machine learning-based algorithms are assessed. A comparison of different fault detection, classification, and location methods is also presented considering features, inputs, complexity, system used and results. This paper may serve as a guideline for the researchers to understand different methods and techniques in this field

Identification and Location of PD Defects in Medium voltage Underground Power Cables Using High Frequency Current Transformer

Fault location is an important diagnostic task in condition monitoring of underground medium voltage cables. Available solutions are well capable of determining the location of a single partial discharge (PD) defect on a cable section. In case several PD defects are active simultaneously along a cable section, the interpretation of the measured data becomes complex to identify the presence of more than one PD sources. In this paper, experimental investigation of two PD defects/sources at different locations on a medium voltage (MV) cable section is presented. A high frequency current transformer is used for single end PD measurements. Time domain reflectometry-based in-depth study of the reflected pulses provides the most valuable information to identify the presence of PD sources which further leads to the location of the individual PD sources. In this paper, the proposed solution is presented for two PD sources, however, the same methodology can be extended to locate multiple PD sources on the cable.fi=vertaisarvioitu|en=peerReviewed

An Assessment of PIER Electric Grid Research 2003-2014 White Paper

This white paper describes the circumstances in California around the turn of the 21st century that led the California Energy Commission (CEC) to direct additional Public Interest Energy Research funds to address critical electric grid issues, especially those arising from integrating high penetrations of variable renewable generation with the electric grid. It contains an assessment of the beneficial science and technology advances of the resultant portfolio of electric grid research projects administered under the direction of the CEC by a competitively selected contractor, the University of California’s California Institute for Energy and the Environment, from 2003-2014