Power Interface Design and System Stability Analysis for 400 V DC-Powered Data Centers

The demands of high performance cloud computation and internet services have increased in recent decades. These demands have driven the expansion of existing data centers and the construction of new data centers. The high costs of data center downtime are pushing designers to provide high reliability power supplies. Thus, there are significant research questions and challenges to design efficient and environmentally friendly data centers with address increasing energy prices and distributed energy developments. This dissertation work aims to study and investigate the suitable technologies of power interface and system level configuration for high efficiency and reliable data centers. A 400 V DC-powered data center integrated with solar power and hybrid energy storage is proposed to reduce the power loss and cable cost in data centers. A cascaded totem-pole bridgeless PFC converter to convert grid ac voltage to the 400 V dc voltage is proposed in this work. Three main control strategies are developed for the power converters. First, a model predictive control is developed for the cascaded totem-pole bridgeless PFC converter. This control provides stable transient performance and high power efficiency. Second, a power loss model based dual-phase-shift control is applied for the efficiency improvement of dual-active bridge converter. Third, an optimized maximum power point tracking (MPPT) control for solar power and a hybrid energy storage unit (HESU) control are given in this research work. The HESU consists of battery and ultracapacitor packs. The ultracapacitor can improve the battery lifetime and reduce any transients affecting grid side operation. The large signal model of a typical solar power integrated datacenter is built to analyze the system stability with various conditions. The MATLAB/Simulink™-based simulations are used to identify the stable region of the data center power supply. This can help to analyze the sensitivity of the circuit parameters, which include the cable inductance, resistance, and dc bus capacitance. This work analyzes the system dynamic response under different operating conditions to determine the stability of the dc bus voltage. The system stability under different percentages of solar power and hybrid energy storage integrated in the data center are also investigated

Power Interface Design and System Stability Analysis for 400 V DC-Powered Data Centers

The demands of high performance cloud computation and internet services have increased in recent decades. These demands have driven the expansion of existing data centers and the construction of new data centers. The high costs of data center downtime are pushing designers to provide high reliability power supplies. Thus, there are significant research questions and challenges to design efficient and environmentally friendly data centers with address increasing energy prices and distributed energy developments. This dissertation work aims to study and investigate the suitable technologies of power interface and system level configuration for high efficiency and reliable data centers. A 400 V DC-powered data center integrated with solar power and hybrid energy storage is proposed to reduce the power loss and cable cost in data centers. A cascaded totem-pole bridgeless PFC converter to convert grid ac voltage to the 400 V dc voltage is proposed in this work. Three main control strategies are developed for the power converters. First, a model predictive control is developed for the cascaded totem-pole bridgeless PFC converter. This control provides stable transient performance and high power efficiency. Second, a power loss model based dual-phase-shift control is applied for the efficiency improvement of dual-active bridge converter. Third, an optimized maximum power point tracking (MPPT) control for solar power and a hybrid energy storage unit (HESU) control are given in this research work. The HESU consists of battery and ultracapacitor packs. The ultracapacitor can improve the battery lifetime and reduce any transients affecting grid side operation. The large signal model of a typical solar power integrated datacenter is built to analyze the system stability with various conditions. The MATLAB/Simulink™-based simulations are used to identify the stable region of the data center power supply. This can help to analyze the sensitivity of the circuit parameters, which include the cable inductance, resistance, and dc bus capacitance. This work analyzes the system dynamic response under different operating conditions to determine the stability of the dc bus voltage. The system stability under different percentages of solar power and hybrid energy storage integrated in the data center are also investigated

An improved closed loop hybrid phase shift controller for dual active bridge converter

In this paper, a new closed loop hybrid phase shift control is proposed for dual active bridge (DAB) converter with variable input voltage. The extended phase shift (EPS) control is applied when load gets heavy enough and the secondary side phase shift angle decreases to zero. When this modified DAB converter operates at light loads, the triple phase shift (TPS) modulation method is applied, and the added control freedom is the secondary phase shift angle between the two-secondary side switching legs. The hybrid phase shift control (HPS) scheme is a combination of EPS and TPS modulations, and it provides a very simple closed form implementation for the primary and secondary side phase shift angles. Depending on the application by changing the phase shift angles we can achieve Buck or Boost operation. A characteristic table feedback control method has been used for closed loop operation. By using 1D look up table the proposed DAB converter provides constant 400V for any given input voltage

A new active power controller in dual active bridge DC-DC converter with a minimum-current-point-tracking technique

This article proposes a new controller for power regulation in dual active bridge (DAB) dc-dc converter based on a new scheme that tracks minimum RMS current to ensure minimum losses. The proposed controller is based on an implementation of perturb and observe (PO) tracking method that enables minimum current point tracking (MCPT) at any desired level of active power transfer and dc voltage ratio. The PO is embedded in a closed-loop control scheme which simultaneously regulates active power in DAB converter. The nonlinear I - V characteristic of DAB presents the basis for this proposed controller and the rationale of using PO algorithm. The proposed controller does not require complex nonlinear converter modeling and is not circuit parameter dependent. Design procedure of the proposed controller is presented, and extensive simulation is carried out using MATLAB/Simulink to validate the effectiveness of the proposed MCPT closed-loop controller. An experimental prototype also substantiates the results achieved

Modulation and capacitor voltage balancing control of multilevel NPC dual active bridge DC-DC Converters

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The present paper provides a solution to operate multilevel dual active bridge (ML-DAB) converters built upon neutral point clamped switching legs in a full-bridge disposition and with any number of levels on either side of the converter. The main issue of such converters is addressing the inherent unbalance of the dc-link capacitor voltages, which hinders the proper operation and optimum utilization of the converter. The proposed solution comprises a generalized to N levels modulation and control scheme that allows operating these converters, while guaranteeing the proper balance of the dc-link capacitor voltages. The suitability of the proposed solution is verified through simulation and experimental tests performed in five different converter configurations, three of them with an asymmetric number of voltage levels, proving that capacitor voltage balance is achievable in a wide range of operation conditions. Moreover, the efficiency of the ML-DAB converters is demonstrated to be superior to the conventional two-level DAB case.Postprint (author's final draft