Research progress on geosynchronous synthetic aperture radar

Based on its ability to obtain two-dimensional (2D) high-resolution images in all-time and all-weather conditions, spaceborne synthetic aperture radar (SAR) has become an important remote sensing technique and the study of such systems has entered a period of vigorous development. Advanced imaging modes such as radar interferometry, tomography, and multi-static imaging, have been demonstrated. However, current in-orbit spaceborne SARs, which all operate in low Earth orbits, have relatively long revisit times ranging from several days to dozens of days, restricting their temporal sampling rate. Geosynchronous SAR (GEO SAR) is an active research area because it provides significant new capability, especially its much-improved temporal sampling. This paper reviews the research progress of GEO SAR technologies in detail. Two typical orbit schemes are presented, followed by the corresponding key issues, including system design, echo focusing, main disturbance factors, repeat-track interferometry, etc, inherent to these schemes. Both analysis and solution research of the above key issues are described. GEO SAR concepts involving multiple platforms are described, including the GEO SAR constellation, GEO-LEO/airborne/unmanned aerial vehicle bistatic SAR, and formation flying GEO SAR (FF-GEO SAR). Due to the high potential of FF-GEO SAR for three-dimensional (3D) deformation retrieval and coherence-based SAR tomography (TomoSAR), we have recently carried out some research related to FF-GEO SAR. This research, which is also discussed in this paper, includes developing a formation design method and an improved TomoSAR processing algorithm. It is found that GEO SAR will continue to be an active topic in the aspect of data processing and multi-platform concept in the near future

Squint mode GEO SAR imaging using bulk range walk correction on received signals

Geosynchronous synthetic aperture radar (GEO SAR) has the potential for conducting long-term observation of target zones, which is essential for remote sensing applications such as disaster monitoring and vegetation measurements. The squint imaging mode is crucial for long-term observation using GEO SAR. However, this type of SAR imaging is problematic because the squint mode introduces a nonzero range cell walk, which increases the prevalence of invalid data in echoes and intensifies the coupling between the azimuth and range. Therefore, this paper proposes a novel squint mode GEO SAR imaging method based on the correction of the bulk range walk of received signals. Adjusting the starting time of the receiving window significantly reduces the redundancy in echoes. Then, first-order filtering, range cell migration correction, range compression, partial dechirp, and azimuth compression are used to obtain the imaging result. Simulation results for the GEO SAR imaging ofWenchuan County in China demonstrate that the proposed algorithm can achieve a resolution of 5 m within a 30 × 30 km swath over 48% of the orbital period

Global security

The presentation explores the NATO Space Surveillance Network and the recent developments in updating it with state of the art infrared sensors and high bandwidth communication satellites using triple junction solar panel arrays

Analysis of Background Ionospheric Effects on Geosynchronous SAR Imaging

Background ionospheric propagation effects are adverse to the performance of Geosynchronous Synthetic Aperture Radar (GEO SAR) system. This paper focuses on the background ionospheric phase advance, which can be modelled as a function of Slant Total Electron Content (STEC). The dispersive feature of the phase advance caused by the background ionosphere could be able to distort the GEO SAR range-imaging. Furthermore, for GEO SAR, the integration time is ultra-long and the coverage is ultra-large, thus temporal and spatial distributions of the background ionosphere have to be taken into account. The resultant ionospheric phase variations might decorrelate the azimuth signal and then lead to azimuth-imaging deteriorations. In this paper, the theoretical model of the background ionospheric effects on GEO SAR imaging is established and in-depth analyses are presented. Finally, theoretical analyses are validated by the signal-level simulation

Spaceborne synthetic-aperture imaging radars: Applications, techniques, and technology

In the last four years, the first two Earth-orbiting, space-borne, synthetic-aperture imaging radars (SAR) were successfully developed and operated. This was a major achievement in the development of spaceborne radar sensors and ground processors. The data acquired with these sensors extended the capability of Earth resources and ocean-surface observation into a new region of the electromagnetic spectrum. This paper is a review of the different aspects of spaceborne imaging radars. It includes a review of: 1) the unique characteristics of space-borne SAR systems; 2) the state of the art in spaceborne SAR hardware and SAR optical and digital processors; 3) the different data-handling techniques; and 4) the different applications of spaceborne SAR data

Temporal Characteristics of Boreal Forest Radar Measurements

Radar observations of forests are sensitive to seasonal changes, meteorological variables and variations in soil and tree water content. These phenomena cause temporal variations in radar measurements, limiting the accuracy of tree height and biomass estimates using radar data. The temporal characteristics of radar measurements of forests, especially boreal forests, are not well understood. To fill this knowledge gap, a tower-based radar experiment was established for studying temporal variations in radar measurements of a boreal forest site in southern Sweden. The work in this thesis involves the design and implementation of the experiment and the analysis of data acquired. The instrument allowed radar signatures from the forest to be monitored over timescales ranging from less than a second to years. A purpose-built, 50 m high tower was equipped with 30 antennas for tomographic imaging at microwave frequencies of P-band (420-450 MHz), L-band (1240-1375 MHz) and C-band (5250-5570 MHz) for multiple polarisation combinations. Parallel measurements using a 20-port vector network analyser resulted in significantly shorter measurement times and better tomographic image quality than previous tower-based radars. A new method was developed for suppressing mutual antenna coupling without affecting the range resolution. Algorithms were developed for compensating for phase errors using an array radar and for correcting for pixel-variant impulse responses in tomographic images. Time series results showed large freeze/thaw backscatter variations due to freezing moisture in trees. P-band canopy backscatter variations of up to 10 dB occurred near instantaneously as the air temperature crossed 0⁰C, with ground backscatter responding over longer timescales. During nonfrozen conditions, the canopy backscatter was very stable with time. Evidence of backscatter variations due to tree water content were observed during hot summer periods only. A high vapour pressure deficit and strong winds increased the rate of transpiration fast enough to reduce the tree water content, which was visible as 0.5-2 dB backscatter drops during the day. Ground backscatter for cross-polarised observations increased during strong winds due to bending tree stems. Significant temporal decorrelation was only seen at P-band during freezing, thawing and strong winds. Suitable conditions for repeat-pass L-band interferometry were only seen during the summer. C-band temporal coherence was high over timescales of seconds and occasionally for several hours for night-time observations during the summer. Decorrelation coinciding with high transpiration rates was observed at L- and C-band, suggesting sensitivity to tree water dynamics.The observations from this experiment are important for understanding, modelling and mitigating temporal variations in radar observables in forest parameter estimation algorithms. The results also are also useful in the design of spaceborne synthetic aperture radar missions with interferometric and tomographic capabilities. The results motivate the implementation of single-pass interferometric synthetic aperture radars for forest applications at P-, L- and C-band

MISR stereoscopic image matchers: techniques and results

The Multi-angle Imaging SpectroRadiometer (MISR) instrument, launched in December 1999 on the NASA EOS Terra satellite, produces images in the red band at 275-m resolution, over a swath width of 360 km, for the nine camera angles 70.5/spl deg/, 60/spl deg/, 45.6/spl deg/, and 26.1/spl deg/ forward, nadir, and 26.1/spl deg/, 45.6/spl deg/, 60/spl deg/, and 70.5/spl deg/ aft. A set of accurate and fast algorithms was developed for automated stereo matching of cloud features to obtain cloud-top height and motion over the nominal six-year lifetime of the mission. Accuracy and speed requirements necessitated the use of a combination of area-based and feature-based stereo-matchers with only pixel-level acuity. Feature-based techniques are used for cloud motion retrieval with the off-nadir MISR camera views, and the motion is then used to provide a correction to the disparities used to measure cloud-top heights which are derived from the innermost three cameras. Intercomparison with a previously developed "superstereo" matcher shows that the results are very comparable in accuracy with much greater coverage and at ten times the speed. Intercomparison of feature-based and area-based techniques shows that the feature-based techniques are comparable in accuracy at a factor of eight times the speed. An assessment of the accuracy of the area-based matcher for cloud-free scenes demonstrates the accuracy and completeness of the stereo-matcher. This trade-off has resulted in the loss of a reliable quality metric to predict accuracy and a slightly high blunder rate. Examples are shown of the application of the MISR stereo-matchers on several difficult scenes which demonstrate the efficacy of the matching approach

Geosynchronous synthetic aperture radar : design and applications

Synthetic Aperture Radar (SAR) imaging from geosynchronous orbit has significant potential advantages over conventional low-Earth orbit (LEO) radars, but also challenges to overcome. This thesis investigates both active and passive geosynchronous SAR configurations, presenting their different features and advantages. Following a system design trade-off that involved phase uncertainties, link budget, frequency and integration time, an L band bi-static configuration with 8-hour integration time that reuses the signal from a non-cooperative transmitter has been presented as a suitable solution. Cranfield Space Research Centre looked into this configuration and proposed the GeoSAR concept, an L band bi-static SAR based on the concept by Prati et al. (1998). It flies along a circular ground track orbit, reuses the signal coming from a noncooperative transmitter in GEO and achieves a spatial resolution of about 100 m. The present research contributes to the GeoSAR concept exploring the implications due to the 8-hour integration time and providing insights about its performance and its possible fields of application. Targets such as canopies change their backscattered phase on timescales of seconds due to their motion. On longer time scales, changes in dielectric properties of targets, Earth tides and perturbations in the structure of the atmosphere contribute to generate phase fluctuations in the collected signals. These phenomena bring temporal decorrelation and cause a reduction in SAR coherent integration gain. They have to be compensated for if useful images are to be provided. A SAR azimuth simulator has been developed to study the influence of temporal decorrelation on GeoSAR point spread function. The analysis shows that ionospheric delay is the major source of decorrelation; other effects, such as tropospheric delay and Earth tides, have to be dealt with but appear to be easier to handle. Two different options for GeoSAR interferometry have been discussed. The system is well suited to differential interferometry, due to the short perpendicular baseline induced by the geometry. A GeoSAR has advantages over a Low Earth Orbit (LEO) SAR system to monitor processes with significant variability over daily or shorter timescales (e.g. soil moisture variation). This potential justifies further study of the concept.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Geosynchronous synthetic aperture radar : design and applications

Synthetic Aperture Radar (SAR) imaging from geosynchronous orbit has significant potential advantages over conventional low-Earth orbit (LEO) radars, but also challenges to overcome. This thesis investigates both active and passive geosynchronous SAR configurations, presenting their different features and advantages. Following a system design trade-off that involved phase uncertainties, link budget, frequency and integration time, an L band bi-static configuration with 8-hour integration time that reuses the signal from a non-cooperative transmitter has been presented as a suitable solution. Cranfield Space Research Centre looked into this configuration and proposed the GeoSAR concept, an L band bi-static SAR based on the concept by Prati et al. (1998). It flies along a circular ground track orbit, reuses the signal coming from a noncooperative transmitter in GEO and achieves a spatial resolution of about 100 m. The present research contributes to the GeoSAR concept exploring the implications due to the 8-hour integration time and providing insights about its performance and its possible fields of application. Targets such as canopies change their backscattered phase on timescales of seconds due to their motion. On longer time scales, changes in dielectric properties of targets, Earth tides and perturbations in the structure of the atmosphere contribute to generate phase fluctuations in the collected signals. These phenomena bring temporal decorrelation and cause a reduction in SAR coherent integration gain. They have to be compensated for if useful images are to be provided. A SAR azimuth simulator has been developed to study the influence of temporal decorrelation on GeoSAR point spread function. The analysis shows that ionospheric delay is the major source of decorrelation; other effects, such as tropospheric delay and Earth tides, have to be dealt with but appear to be easier to handle. Two different options for GeoSAR interferometry have been discussed. The system is well suited to differential interferometry, due to the short perpendicular baseline induced by the geometry. A GeoSAR has advantages over a Low Earth Orbit (LEO) SAR system to monitor processes with significant variability over daily or shorter timescales (e.g. soil moisture variation). This potential justifies further study of the concept.EThOS - Electronic Theses Online ServiceGBUnited Kingdo