Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page

Timing-Error Tolerance Techniques for Low-Power DSP: Filters and Transforms

Low-power Digital Signal Processing (DSP) circuits are critical to commercial System-on-Chip design for battery powered devices. Dynamic Voltage Scaling (DVS) of digital circuits can reclaim worst-case supply voltage margins for delay variation, reducing power consumption. However, removing static margins without compromising robustness is tremendously challenging, especially in an era of escalating reliability concerns due to continued process scaling. The Razor DVS scheme addresses these concerns, by ensuring robustness using explicit timing-error detection and correction circuits. Nonetheless, the design of low-complexity and low-power error correction is often challenging. In this thesis, the Razor framework is applied to fixed-precision DSP filters and transforms. The inherent error tolerance of many DSP algorithms is exploited to achieve very low-overhead error correction. Novel error correction schemes for DSP datapaths are proposed, with very low-overhead circuit realisations. Two new approximate error correction approaches are proposed. The first is based on an adapted sum-of-products form that prevents errors in intermediate results reaching the output, while the second approach forces errors to occur only in less significant bits of each result by shaping the critical path distribution. A third approach is described that achieves exact error correction using time borrowing techniques on critical paths. Unlike previously published approaches, all three proposed are suitable for high clock frequency implementations, as demonstrated with fully placed and routed FIR, FFT and DCT implementations in 90nm and 32nm CMOS. Design issues and theoretical modelling are presented for each approach, along with SPICE simulation results demonstrating power savings of 21 – 29%. Finally, the design of a baseband transmitter in 32nm CMOS for the Spectrally Efficient FDM (SEFDM) system is presented. SEFDM systems offer bandwidth savings compared to Orthogonal FDM (OFDM), at the cost of increased complexity and power consumption, which is quantified with the first VLSI architecture

Embracing Low-Power Systems with Improvement in Security and Energy-Efficiency

As the economies around the world are aligning more towards usage of computing systems, the global energy demand for computing is increasing rapidly. Additionally, the boom in AI based applications and services has already invited the pervasion of specialized computing hardware architectures for AI (accelerators). A big chunk of research in the industry and academia is being focused on providing energy efficiency to all kinds of power hungry computing architectures. This dissertation adds to these efforts. Aggressive voltage underscaling of chips is one the effective low power paradigms of providing energy efficiency. This dissertation identifies and deals with the reliability and performance problems associated with this paradigm and innovates novel energy efficient approaches. Specifically, the properties of a low power security primitive have been improved and, higher performance has been unlocked in an AI accelerator (Google TPU) in an aggressively voltage underscaled environment. And, novel power saving opportunities have been unlocked by characterizing the usage pattern of a baseline TPU with rigorous mathematical analysis

Techniques d'abstraction pour l'analyse et la mitigation des effets dus à la radiation

The main objective of this thesis is to develop techniques that can beused to analyze and mitigate the effects of radiation-induced soft errors in industrialscale integrated circuits. To achieve this goal, several methods have been developedbased on analyzing the design at higher levels of abstraction. These techniquesaddress both sequential and combinatorial SER.Fault-injection simulations remain the primary method for analyzing the effectsof soft errors. In this thesis, techniques which significantly speed-up fault-injectionsimulations are presented. Soft errors in flip-flops are typically mitigated by selectivelyreplacing the most critical flip-flops with hardened implementations. Selectingan optimal set to harden is a compute intensive problem and the second contributionconsists of a clustering technique which significantly reduces the number offault-injections required to perform selective mitigation.In terrestrial applications, the effect of soft errors in combinatorial logic hasbeen fairly small. It is known that this effect is growing, yet there exist few techniqueswhich can quickly estimate the extent of combinatorial SER for an entireintegrated circuit. The third contribution of this thesis is a hierarchical approachto combinatorial soft error analysis.Systems-on-chip are often developed by re-using design-blocks that come frommultiple sources. In this context, there is a need to develop and exchange reliabilitymodels. The final contribution of this thesis consists of an application specificmodeling language called RIIF (Reliability Information Interchange Format). Thislanguage is able to model how faults at the gate-level propagate up to the block andchip-level. Work is underway to standardize the RIIF modeling language as well asto extend it beyond modeling of radiation-induced failures.In addition to the main axis of research, some tangential topics were studied incollaboration with other teams. One of these consisted in the development of a novelapproach for protecting ternary content addressable memories (TCAMs), a specialtype of memory important in networking applications. The second supplementalproject resulted in an algorithm for quickly generating approximate redundant logicwhich can protect combinatorial networks against permanent faults. Finally anapproach for reducing the detection time for errors in the configuration RAM forField-Programmable Gate-Arrays (FPGAs) was outlined.Les effets dus à la radiation peuvent provoquer des pannes dans des circuits intégrés. Lorsqu'une particule subatomique, fait se déposer une charge dans les régions sensibles d'un transistor cela provoque une impulsion de courant. Cette impulsion peut alors engendrer l'inversion d'un bit ou se propager dans un réseau de logique combinatoire avant d'être échantillonnée par une bascule en aval.Selon l'état du circuit au moment de la frappe de la particule et selon l'application, cela provoquera une panne observable ou non. Parmi les événements induits par la radiation, seule une petite portion génère des pannes. Il est donc essentiel de déterminer cette fraction afin de prédire la fiabilité du système. En effet, les raisons pour lesquelles une perturbation pourrait être masquée sont multiples, et il est de plus parfois difficile de préciser ce qui constitue une erreur. A cela s'ajoute le fait que les circuits intégrés comportent des milliards de transistors. Comme souvent dans le contexte de la conception assisté par ordinateur, les approches hiérarchiques et les techniques d'abstraction permettent de trouver des solutions.Cette thèse propose donc plusieurs nouvelles techniques pour analyser les effets dus à la radiation. La première technique permet d'accélérer des simulations d'injections de fautes en détectant lorsqu'une faute a été supprimée du système, permettant ainsi d'arrêter la simulation. La deuxième technique permet de regrouper en ensembles les éléments d'un circuit ayant une fonction similaire. Ensuite, une analyse au niveau des ensemble peut être faite, identifiant ainsi ceux qui sont les plus critiques et qui nécessitent donc d'être durcis. Le temps de calcul est ainsi grandement réduit.La troisième technique permet d'analyser les effets des fautes transitoires dans les circuits combinatoires. Il est en effet possible de calculer à l'avance la sensibilité à des fautes transitoires de cellules ainsi que les effets de masquage dans des blocs fréquemment utilisés. Ces modèles peuvent alors être combinés afin d'analyser la sensibilité de grands circuits. La contribution finale de cette thèse consiste en la définition d'un nouveau langage de modélisation appelé RIIF (Reliability Information Ineterchange Format). Ce langage permet de décrire le taux des fautes dans des composants simples en fonction de leur environnement de fonctionnement. Ces composants simples peuvent ensuite être combinés permettant ainsi de modéliser la propagation de leur fautes vers des pannes au niveau système. En outre, l'utilisation d'un langage standard facilite l'échange de données de fiabilité entre les partenaires industriels.Au-delà des contributions principales, cette thèse aborde aussi des techniques permettant de protéger des mémoires associatives ternaires (TCAMs). Les approches classiques de protection (codes correcteurs) ne s'appliquent pas directement. Une des nouvelles techniques proposées consiste à utiliser une structure de données qui peut détecter, d'une manière statistique, quand le résultat n'est pas correct. La probabilité de détection peut être contrôlée par le nombre de bits alloués à cette structure. Une autre technique consiste à utiliser un détecteur de courant embarqué (BICS) afin de diriger un processus de fond directement vers le région touchée par une erreur. La contribution finale consiste en un algorithme qui permet de synthétiser de la logique combinatoire afin de protéger des circuits combinatoires contre les fautes transitoires.Dans leur ensemble, ces techniques facilitent l'analyse des erreurs provoquées par les effets dus à la radiation dans les circuits intégrés, en particulier pour les très grands circuits composés de blocs provenant de divers fournisseurs. Des techniques pour mieux sélectionner les bascules/flip-flops à durcir et des approches pour protéger des TCAMs ont étés étudiées

Recent Perspectives in Pyrolysis Research

Recent Perspectives in Pyrolysis Research presents and discusses different routes of pyrolytic conversions. It contains exhaustive and comprehensive reports and studies of the use of pyrolysis for energy and materials production and waste management

Hardware / Software Architectural and Technological Exploration for Energy-Efficient and Reliable Biomedical Devices

Nowadays, the ubiquity of smart appliances in our everyday lives is increasingly strengthening the links between humans and machines. Beyond making our lives easier and more convenient, smart devices are now playing an important role in personalized healthcare delivery. This technological breakthrough is particularly relevant in a world where population aging and unhealthy habits have made non-communicable diseases the first leading cause of death worldwide according to international public health organizations. In this context, smart health monitoring systems termed Wireless Body Sensor Nodes (WBSNs), represent a paradigm shift in the healthcare landscape by greatly lowering the cost of long-term monitoring of chronic diseases, as well as improving patients' lifestyles. WBSNs are able to autonomously acquire biological signals and embed on-node Digital Signal Processing (DSP) capabilities to deliver clinically-accurate health diagnoses in real-time, even outside of a hospital environment. Energy efficiency and reliability are fundamental requirements for WBSNs, since they must operate for extended periods of time, while relying on compact batteries. These constraints, in turn, impose carefully designed hardware and software architectures for hosting the execution of complex biomedical applications. In this thesis, I develop and explore novel solutions at the architectural and technological level of the integrated circuit design domain, to enhance the energy efficiency and reliability of current WBSNs. Firstly, following a top-down approach driven by the characteristics of biomedical algorithms, I perform an architectural exploration of a heterogeneous and reconfigurable computing platform devoted to bio-signal analysis. By interfacing a shared Coarse-Grained Reconfigurable Array (CGRA) accelerator, this domain-specific platform can achieve higher performance and energy savings, beyond the capabilities offered by a baseline multi-processor system. More precisely, I propose three CGRA architectures, each contributing differently to the maximization of the application parallelization. The proposed Single, Multi and Interleaved-Datapath CGRA designs allow the developed platform to achieve substantial energy savings of up to 37%, when executing complex biomedical applications, with respect to a multi-core-only platform. Secondly, I investigate how the modeling of technology reliability issues in logic and memory components can be exploited to adequately adjust the frequency and supply voltage of a circuit, with the aim of optimizing its computing performance and energy efficiency. To this end, I propose a novel framework for workload-dependent Bias Temperature Instability (BTI) impact analysis on biomedical application results quality. Remarkably, the framework is able to determine the range of safe circuit operating frequencies without introducing worst-case guard bands. Experiments highlight the possibility to safely raise the frequency up to 101% above the maximum obtained with the classical static timing analysis. Finally, through the study of several well-known biomedical algorithms, I propose an approach allowing energy savings by dynamically and unequally protecting an under-powered data memory in a new way compared to regular error protection schemes. This solution relies on the Dynamic eRror compEnsation And Masking (DREAM) technique that reduces by approximately 21% the energy consumed by traditional error correction codes