Accelerating Network Communication and I/O in Scientific High Performance Computing Environments

High performance computing has become one of the major drivers behind technology inventions and science discoveries. Originally driven through the increase of operating frequencies and technology scaling, a recent slowdown in this evolution has led to the development of multi-core architectures, which are supported by accelerator devices such as graphics processing units (GPUs). With the upcoming exascale era, the overall power consumption and the gap between compute capabilities and I/O bandwidth have become major challenges. Nowadays, the system performance is dominated by the time spent in communication and I/O, which highly depends on the capabilities of the network interface. In order to cope with the extreme concurrency and heterogeneity of future systems, the software ecosystem of the interconnect needs to be carefully tuned to excel in reliability, programmability, and usability. This work identifies and addresses three major gaps in today's interconnect software systems. The I/O gap describes the disparity in operating speeds between the computing capabilities and second storage tiers. The communication gap is introduced through the communication overhead needed to synchronize distributed large-scale applications and the mixed workload. The last gap is the so called concurrency gap, which is introduced through the extreme concurrency and the inflicted learning curve posed to scientific application developers to exploit the hardware capabilities. The first contribution is the introduction of the network-attached accelerator approach, which moves accelerators into a "stand-alone" cluster connected through the Extoll interconnect. The novel communication architecture enables the direct accelerators communication without any host interactions and an optimal application-to-compute-resources mapping. The effectiveness of this approach is evaluated for two classes of accelerators: Intel Xeon Phi coprocessors and NVIDIA GPUs. The next contribution comprises the design, implementation, and evaluation of the support of legacy codes and protocols over the Extoll interconnect technology. By providing TCP/IP protocol support over Extoll, it is shown that the performance benefits of the interconnect can be fully leveraged by a broader range of applications, including the seamless support of legacy codes. The third contribution is twofold. First, a comprehensive analysis of the Lustre networking protocol semantics and interfaces is presented. Afterwards, these insights are utilized to map the LNET protocol semantics onto the Extoll networking technology. The result is a fully functional Lustre network driver for Extoll. An initial performance evaluation demonstrates promising bandwidth and message rate results. The last contribution comprises the design, implementation, and evaluation of two easy-to-use load balancing frameworks, which transparently distribute the I/O workload across all available storage system components. The solutions maximize the parallelization and throughput of file I/O. The frameworks are evaluated on the Titan supercomputing systems for three I/O interfaces. For example for large-scale application runs, POSIX I/O and MPI-IO can be improved by up to 50% on a per job basis, while HDF5 shows performance improvements of up to 32%

Building Computing-As-A-Service Mobile Cloud System

The last five years have witnessed the proliferation of smart mobile devices, the explosion of various mobile applications and the rapid adoption of cloud computing in business, governmental and educational IT deployment. There is also a growing trends of combining mobile computing and cloud computing as a new popular computing paradigm nowadays. This thesis envisions the future of mobile computing which is primarily affected by following three trends: First, servers in cloud equipped with high speed multi-core technology have been the main stream today. Meanwhile, ARM processor powered servers is growingly became popular recently and the virtualization on ARM systems is also gaining wide ranges of attentions recently. Second, high-speed internet has been pervasive and highly available. Mobile devices are able to connect to cloud anytime and anywhere. Third, cloud computing is reshaping the way of using computing resources. The classic pay/scale-as-you-go model allows hardware resources to be optimally allocated and well-managed. These three trends lend credence to a new mobile computing model with the combination of resource-rich cloud and less powerful mobile devices. In this model, mobile devices run the core virtualization hypervisor with virtualized phone instances, allowing for pervasive access to more powerful, highly-available virtual phone clones in the cloud. The centralized cloud, powered by rich computing and memory recourses, hosts virtual phone clones and repeatedly synchronize the data changes with virtual phone instances running on mobile devices. Users can flexibly isolate different computing environments. In this dissertation, we explored the opportunity of leveraging cloud resources for mobile computing for the purpose of energy saving, performance augmentation as well as secure computing enviroment isolation. We proposed a framework that allows mo- bile users to seamlessly leverage cloud to augment the computing capability of mobile devices and also makes it simpler for application developers to run their smartphone applications in the cloud without tedious application partitioning. This framework was built with virtualization on both server side and mobile devices. It has three building blocks including agile virtual machine deployment, efficient virtual resource management, and seamless mobile augmentation. We presented the design, imple- mentation and evaluation of these three components and demonstrated the feasibility of the proposed mobile cloud model

Harnessing low-level tuning in modern architectures for high-performance network monitoring in physical and virtual platforms

Tesis doctoral inédita leída en la Universidad Autónoma de Madrid, Escuela Politécnica Superior, Departamento de Tecnología Electrónica y de las Comunicaciones. Fecha de lectura: 02-07-201

High-performance software packet processing

In today’s Internet, it is highly desirable to have fast and scalable software packet processing solutions for network applications that run on commodity hardware. The advent of cloud computing drives the continued rapid growth of Internet traffic. Moreover, the development of emerging networking techniques, such as Network Function Virtualization, significantly shapes the need for implementing the network functions in software. Finally, with the advancement of modern platforms as well as software frameworks for packet processing, network applications have potential to process 100+ Gbps network traffic on a single commodity server. Representative frameworks include the Click modular router, the RouteBricks scalable routing architecture, and BUFFALO, the software-based Ethernet switch. Beneath this general-purpose routing and switching functionality lie a broad set of network applications, many of which are handled with custom methods to provide cost-effectiveness and flexibility. This thesis considers two long-standing networking applications, IP lookup and distributed denial-of-service (DDoS) mitigation, and proposes efficient software-based methods drawing from this new perspective. In this thesis, we first introduce several optimization techniques to accelerate network applications by taking advantage of modern CPU features. Then, we explore the IP lookup problem to find the longest matching prefix of an IP address in a set of prefixes. An ideal IP lookup algorithm should achieve small constant IP lookup time, and on-chip memory usage. However, no prior IP lookup algorithm achieves both requirements at the same time. We propose SAIL, a splitting approach to IP lookup, and a suite of algorithms for IP lookup based on SAIL framework. We conducted extensive experiments to evaluate our algorithms, and experimental results show that our SAIL algorithms are much faster than well-known IP lookup algorithms. Next, we switch our focus to DDoS, an attempt to disrupt the legitimate traffic of a victim by sending a flood of Internet traffic from different sources. Our solution is Gatekeeper, the first open-source and deployable DDoS mitigation system. We present a series of optimization techniques, including use of modern platforms, group prefetching, coroutines, and hashing, to accelerate Gatekeeper. Experimental results show that these optimization techniques significantly improve its performance over alternative baseline solutions.2022-01-30T00:00:00

Rack-Scale Memory Pooling for Datacenters

The rise of web-scale services has led to a staggering growth in user data on the Internet. To transform such a vast raw data into valuable information for the user and provide quality assurances, it is important to minimize access latency and enable in-memory processing. For more than a decade, the only practical way to accommodate for ever-growing data in memory has been to scale out server resources, which has led to the emergence of large-scale datacenters and distributed non-relational databases (NoSQL). Such horizontal scaling of resources translates to an increasing number of servers that participate in processing individual user requests. Typically, each user request results in hundreds of independent queries targeting different NoSQL nodes - servers, and the larger the number of servers involved, the higher the fan-out. To complete a single user request, all of the queries associated with that request have to complete first, and thus, the slowest query determines the completion time. Because of skewed popularity distributions and resource contention, the more servers we have, the harder it is to achieve high throughput and facilitate server utilization, without violating service level objectives. This thesis proposes rack-scale memory pooling (RSMP), a new scaling technique for future datacenters that reduces networking overheads and improves the performance of core datacenter software. RSMP is an approach to building larger, rack-scale capacity units for datacenters through specialized fabric interconnects with support for one-sided operations, and using them, in lieu of conventional servers (e.g. 1U), to scale out. We define an RSMP unit to be a server rack connecting 10s to 100s of servers to a secondary network enabling direct, low-latency access to the global memory of the rack. We, then, propose a new RSMP design - Scale-Out NUMA that leverages integration and a NUMA fabric to bridge the gap between local and remote memory to only 5× difference in access latency. Finally, we show how RSMP impacts NoSQL data serving, a key datacenter service used by most web-scale applications today. We show that using fewer larger data shards leads to less load imbalance and higher effective throughput, without violating applications¿ service level objectives. For example, by using Scale-Out NUMA, RSMP improves the throughput of a key-value store up to 8.2× over a traditional scale-out deployment

Towards resource-aware computing for task-based runtimes and parallel architectures

Current large scale systems show increasing power demands, to the point that it has become a huge strain on facilities and budgets. The increasing restrictions in terms of power consumption of High Performance Computing (HPC) systems and data centers have forced hardware vendors to include power capping capabilities in their commodity processors. Power capping opens up new opportunities for applications to directly manage their power behavior at user level. However, constraining power consumption causes the individual sockets of a parallel system to deliver different performance levels under the same power cap, even when they are equally designed, which is an effect caused by manufacturing variability. Modern chips suffer from heterogeneous power consumption due to manufacturing issues, a problem known as manufacturing or process variability. As a result, systems that do not consider such variability caused by manufacturing issues lead to performance degradations and wasted power. In order to avoid such negative impact, users and system administrators must actively counteract any manufacturing variability. In this thesis we show that parallel systems benefit from taking into account the consequences of manufacturing variability, in terms of both performance and energy efficiency. In order to evaluate our work we have also implemented our own task-based version of the PARSEC benchmark suite. This allows to test our methodology using state-of-the-art parallelization techniques and real world workloads. We present two approaches to mitigate manufacturing variability, by power redistribution at runtime level and by power- and variability-aware job scheduling at system-wide level. A parallel runtime system can be used to effectively deal with this new kind of performance heterogeneity by compensating the uneven effects of power capping. In the context of a NUMA node composed of several multi core sockets, our system is able to optimize the energy and concurrency levels assigned to each socket to maximize performance. Applied transparently within the parallel runtime system, it does not require any programmer interaction like changing the application source code or manually reconfiguring the parallel system. We compare our novel runtime analysis with an offline approach and demonstrate that it can achieve equal performance at a fraction of the cost. The next approach presented in this theis, we show that it is possible to predict the impact of this variability on specific applications by using variability-aware power prediction models. Based on these power models, we propose two job scheduling policies that consider the effects of manufacturing variability for each application and that ensures that power consumption stays under a system wide power budget. We evaluate our policies under different power budgets and traffic scenarios, consisting of both single- and multi-node parallel applications.Los sistemas modernos de gran escala muestran crecientes demandas de energía, hasta el punto de que se ha convertido en una gran presión para las instalaciones y los presupuestos. Las restricciones crecientes de consumo de energía de los sistemas de alto rendimiento (HPC) y los centros de datos han obligado a los proveedores de hardware a incluir capacidades de limitación de energía en sus procesadores. La limitación de energía abre nuevas oportunidades para que las aplicaciones administren directamente su comportamiento de energía a nivel de usuario. Sin embargo, la restricción en el consumo de energía de sockets individuales de un sistema paralelo resulta en diferentes niveles de rendimiento, por el mismo límite de potencia, incluso cuando están diseñados por igual. Esto es un efecto causado durante el proceso de la fabricación. Los chips modernos sufren de un consumo de energía heterogéneo debido a problemas de fabricación, un problema conocido como variabilidad del proceso o fabricación. Como resultado, los sistemas que no consideran este tipo de variabilidad causada por problemas de fabricación conducen a degradaciones del rendimiento y desperdicio de energía. Para evitar dicho impacto negativo, los usuarios y administradores del sistema deben contrarrestar activamente cualquier variabilidad de fabricación. En esta tesis, demostramos que los sistemas paralelos se benefician de tener en cuenta las consecuencias de la variabilidad de la fabricación, tanto en términos de rendimiento como de eficiencia energética. Para evaluar nuestro trabajo, también hemos implementado nuestra propia versión del paquete de aplicaciones de prueba PARSEC, basada en tareas paralelos. Esto permite probar nuestra metodología utilizando técnicas avanzadas de paralelización con cargas de trabajo del mundo real. Presentamos dos enfoques para mitigar la variabilidad de fabricación, mediante la redistribución de la energía a durante la ejecución de las aplicaciones y mediante la programación de trabajos a nivel de todo el sistema. Se puede utilizar un sistema runtime paralelo para tratar con eficacia este nuevo tipo de heterogeneidad de rendimiento, compensando los efectos desiguales de la limitación de potencia. En el contexto de un nodo NUMA compuesto de varios sockets y núcleos, nuestro sistema puede optimizar los niveles de energía y concurrencia asignados a cada socket para maximizar el rendimiento. Aplicado de manera transparente dentro del sistema runtime paralelo, no requiere ninguna interacción del programador como cambiar el código fuente de la aplicación o reconfigurar manualmente el sistema paralelo. Comparamos nuestro novedoso análisis de runtime con los resultados óptimos, obtenidos de una análisis manual exhaustiva, y demostramos que puede lograr el mismo rendimiento a una fracción del costo. El siguiente enfoque presentado en esta tesis, muestra que es posible predecir el impacto de la variabilidad de fabricación en aplicaciones específicas mediante el uso de modelos de predicción de potencia conscientes de la variabilidad. Basados ​​en estos modelos de predicción de energía, proponemos dos políticas de programación de trabajos que consideran los efectos de la variabilidad de fabricación para cada aplicación y que aseguran que el consumo se mantiene bajo un presupuesto de energía de todo el sistema. Evaluamos nuestras políticas con diferentes presupuestos de energía y escenarios de tráfico, que consisten en aplicaciones paralelas que corren en uno o varios nodos.Postprint (published version

Towards resource-aware computing for task-based runtimes and parallel architectures

Current large scale systems show increasing power demands, to the point that it has become a huge strain on facilities and budgets. The increasing restrictions in terms of power consumption of High Performance Computing (HPC) systems and data centers have forced hardware vendors to include power capping capabilities in their commodity processors. Power capping opens up new opportunities for applications to directly manage their power behavior at user level. However, constraining power consumption causes the individual sockets of a parallel system to deliver different performance levels under the same power cap, even when they are equally designed, which is an effect caused by manufacturing variability. Modern chips suffer from heterogeneous power consumption due to manufacturing issues, a problem known as manufacturing or process variability. As a result, systems that do not consider such variability caused by manufacturing issues lead to performance degradations and wasted power. In order to avoid such negative impact, users and system administrators must actively counteract any manufacturing variability. In this thesis we show that parallel systems benefit from taking into account the consequences of manufacturing variability, in terms of both performance and energy efficiency. In order to evaluate our work we have also implemented our own task-based version of the PARSEC benchmark suite. This allows to test our methodology using state-of-the-art parallelization techniques and real world workloads. We present two approaches to mitigate manufacturing variability, by power redistribution at runtime level and by power- and variability-aware job scheduling at system-wide level. A parallel runtime system can be used to effectively deal with this new kind of performance heterogeneity by compensating the uneven effects of power capping. In the context of a NUMA node composed of several multi core sockets, our system is able to optimize the energy and concurrency levels assigned to each socket to maximize performance. Applied transparently within the parallel runtime system, it does not require any programmer interaction like changing the application source code or manually reconfiguring the parallel system. We compare our novel runtime analysis with an offline approach and demonstrate that it can achieve equal performance at a fraction of the cost. The next approach presented in this theis, we show that it is possible to predict the impact of this variability on specific applications by using variability-aware power prediction models. Based on these power models, we propose two job scheduling policies that consider the effects of manufacturing variability for each application and that ensures that power consumption stays under a system wide power budget. We evaluate our policies under different power budgets and traffic scenarios, consisting of both single- and multi-node parallel applications.Los sistemas modernos de gran escala muestran crecientes demandas de energía, hasta el punto de que se ha convertido en una gran presión para las instalaciones y los presupuestos. Las restricciones crecientes de consumo de energía de los sistemas de alto rendimiento (HPC) y los centros de datos han obligado a los proveedores de hardware a incluir capacidades de limitación de energía en sus procesadores. La limitación de energía abre nuevas oportunidades para que las aplicaciones administren directamente su comportamiento de energía a nivel de usuario. Sin embargo, la restricción en el consumo de energía de sockets individuales de un sistema paralelo resulta en diferentes niveles de rendimiento, por el mismo límite de potencia, incluso cuando están diseñados por igual. Esto es un efecto causado durante el proceso de la fabricación. Los chips modernos sufren de un consumo de energía heterogéneo debido a problemas de fabricación, un problema conocido como variabilidad del proceso o fabricación. Como resultado, los sistemas que no consideran este tipo de variabilidad causada por problemas de fabricación conducen a degradaciones del rendimiento y desperdicio de energía. Para evitar dicho impacto negativo, los usuarios y administradores del sistema deben contrarrestar activamente cualquier variabilidad de fabricación. En esta tesis, demostramos que los sistemas paralelos se benefician de tener en cuenta las consecuencias de la variabilidad de la fabricación, tanto en términos de rendimiento como de eficiencia energética. Para evaluar nuestro trabajo, también hemos implementado nuestra propia versión del paquete de aplicaciones de prueba PARSEC, basada en tareas paralelos. Esto permite probar nuestra metodología utilizando técnicas avanzadas de paralelización con cargas de trabajo del mundo real. Presentamos dos enfoques para mitigar la variabilidad de fabricación, mediante la redistribución de la energía a durante la ejecución de las aplicaciones y mediante la programación de trabajos a nivel de todo el sistema. Se puede utilizar un sistema runtime paralelo para tratar con eficacia este nuevo tipo de heterogeneidad de rendimiento, compensando los efectos desiguales de la limitación de potencia. En el contexto de un nodo NUMA compuesto de varios sockets y núcleos, nuestro sistema puede optimizar los niveles de energía y concurrencia asignados a cada socket para maximizar el rendimiento. Aplicado de manera transparente dentro del sistema runtime paralelo, no requiere ninguna interacción del programador como cambiar el código fuente de la aplicación o reconfigurar manualmente el sistema paralelo. Comparamos nuestro novedoso análisis de runtime con los resultados óptimos, obtenidos de una análisis manual exhaustiva, y demostramos que puede lograr el mismo rendimiento a una fracción del costo. El siguiente enfoque presentado en esta tesis, muestra que es posible predecir el impacto de la variabilidad de fabricación en aplicaciones específicas mediante el uso de modelos de predicción de potencia conscientes de la variabilidad. Basados ​​en estos modelos de predicción de energía, proponemos dos políticas de programación de trabajos que consideran los efectos de la variabilidad de fabricación para cada aplicación y que aseguran que el consumo se mantiene bajo un presupuesto de energía de todo el sistema. Evaluamos nuestras políticas con diferentes presupuestos de energía y escenarios de tráfico, que consisten en aplicaciones paralelas que corren en uno o varios nodos

Co-designing reliability and performance for datacenter memory

Memory is one of the key components that affects reliability and performance of datacenter servers. Memory in today’s servers is organized and shared in several ways to provide the most performant and efficient access to data. For example, cache hierarchy in multi-core chips to reduce access latency, non-uniform memory access (NUMA) in multi-socket servers to improve scalability, disaggregation to increase memory capacity. In all these organizations, hardware coherence protocols are used to maintain memory consistency of this shared memory and implicitly move data to the requesting cores. This thesis aims to provide fault-tolerance against newer models of failure in the organization of memory in datacenter servers. While designing for improved reliability, this thesis explores solutions that can also enhance performance of applications. The solutions build over modern coherence protocols to achieve these properties. First, we observe that DRAM memory system failure rates have increased, demanding stronger forms of memory reliability. To combat this, the thesis proposes Dvé, a hardware driven replication mechanism where data blocks are replicated across two different memory controllers in a cache-coherent NUMA system. Data blocks are accompanied by a code with strong error detection capabilities so that when an error is detected, correction is performed using the replica. Dvé’s organization offers two independent points of access to data which enables: (a) strong error correction that can recover from a range of faults affecting any of the components in the memory and (b) higher performance by providing another nearer point of memory access. Dvé’s coherent replication keeps the replicas in sync for reliability and also provides coherent access to read replicas during fault-free operation for improved performance. Dvé can flexibly provide these benefits on-demand at runtime. Next, we observe that the coherence protocol itself requires to be hardened against failures. Memory in datacenter servers is being disaggregated from the compute servers into dedicated memory servers, driven by standards like CXL. CXL specifies the coherence protocol semantics for compute servers to access and cache data from a shared region in the disaggregated memory. However, the CXL specification lacks the requisite level of fault-tolerance necessary to operate at an inter-server scale within the datacenter. Compute servers can fail or be unresponsive in the datacenter and therefore, it is important that the coherence protocol remain available in the presence of such failures. The thesis proposes Āpta, a CXL-based, shared disaggregated memory system for keeping the cached data consistent without compromising availability in the face of compute server failures. Āpta architects a high-performance fault-tolerant object-granular memory server that significantly improves performance for stateless function-as-a-service (FaaS) datacenter applications