Minimum-time control for structurally persistent continuous Petri nets and the application in distributed Control

In this report, we first address the minimum-time control problem of structurally persistent timed continuous Petri Net systems (ContPN). In particular, an ON-OFF controller is proposed to drive the system from a given initial marking to the final marking in minimum-time. The controller is developed first for the discrete-time system ensuring that all transitions are fired as fast as possible in each sampling period until the required total firing counts are reached. After that, they are stopped suddenly. By taking the limit of the sampling period, the controller for continuous-time systems is obtained. Simplicity and the fact that it ensures minimum-time are the main advantages of the controller. A manufacturing system is taken as case study to illustrate the control strategy. In a distributed controlled system, normally a complex dynamic system, the controllers are not centralized in one location, but are distributed in subsystems. We try to apply the ON-OFF controller into the distributed control of large scale systems modeled with timed continuous Petri net. The original net system is first structurally decompose into smaller subnets through sets of places. Then the ON-OFF controller is applied in controlling each subsystem. Algorithms are proposed to compute admissible control laws for the local subsystems in a distributed way. It is proved that with that control laws, the final state can be reached in minimum time

Control of continuous Petri nets using ON/OFF based method

Abstract: Continuous Petri Nets (CPN) can be used to approximate classical discrete Petri nets which suffer from the state explosion problem. In this paper we focus on the control of timed CPN (TCPN), aiming to drive the system from an initial state to a desired final one. This problem is similar to the set-point control problem in a general continuous-state system. In a previous work, a simple and efficient ON/OFF controller was proposed for structurally persistent nets, and it is proved to be minimum-time. In this work the ON/OFF controller is extended to general TCPN, but in this case, the minimum-time evolution is not guaranteed. Three extensions are proposed, all of them are based on the ON/OFF strategy. Some comparisons of those controllers are given in terms of their applications to an assembly system

On Minimum-time Control of Continuous Petri nets: Centralized and Decentralized Perspectives

Muchos sistemas artificiales, como los sistemas de manufactura, de logística, de telecomunicaciones o de tráfico, pueden ser vistos "de manera natural" como Sistemas Dinámicos de Eventos Discretos (DEDS). Desafortunadamente, cuando tienen grandes poblaciones, estos sistemas pueden sufrir del clásico problema de la explosión de estados. Con la intención de evitar este problema, se pueden aplicar técnicas de fluidificación, obteniendo una relajación fluida del modelo original discreto. Las redes de Petri continuas (CPNs) son una aproximación fluida de las redes de Petri discretas, un conocido formalismo para los DEDS. Una ventaja clave del empleo de las CPNs es que, a menudo, llevan a una substancial reducción del coste computacional. Esta tesis se centra en el control de Redes de Petri continuas temporizadas (TCPNs), donde las transiciones tienen una interpretación temporal asociada. Se asume que los sistemas siguen una semántica de servidores infinitos (velocidad variable) y que las acciones de control aplicables son la disminución de la velocidad del disparo de las transiciones. Se consideran dos interesantes problemas de control en esta tesis: 1) control del marcado objetivo, donde el objetivo es conducir el sistema (tan rápido como sea posible) desde un estado inicial a un estado final deseado, y es similar al problema de control set-point para cualquier sistema de estado continuo; 2) control del flujo óptimo, donde el objetivo es conducir el sistema a un flujo óptimo sin conocimiento a priori del estado final. En particular, estamos interesados en alcanzar el flujo máximo tan rápido como sea posible, lo cual suele ser deseable en la mayoría de sistemas prácticos. El problema de control del marcado objetivo se considera desde las perspectivas centralizada y descentralizada. Proponemos varios controladores centralizados en tiempo mínimo, y todos ellos están basados en una estrategia ON/OFF. Para algunas subclases, como las redes Choice-Free (CF), se garantiza la evolución en tiempo mínimo; mientras que para redes generales, los controladores propuestos son heurísticos. Respecto del problema de control descentralizado, proponemos en primer lugar un controlador descentralizado en tiempo mínimo para redes CF. Para redes generales, proponemos una aproximación distribuida del método Model Predictive Control (MPC); sin embargo en este método no se considera evolución en tiempo mínimo. El problema de control de flujo óptimo (en nuestro caso, flujo máximo) en tiempo mínimo se considera para redes CF. Proponemos un algoritmo heurístico en el que calculamos los "mejores" firing count vectors que llevan al sistema al flujo máximo, y aplicamos una estrategia de disparo ON/OFF. También demostramos que, debido a que las redes CF son persistentes, podemos reducir el tiempo que tarda en alcanzar el flujo máximo con algunos disparos adicionales. Los métodos de control propuestos se han implementado e integrado en una herramienta para Redes de Petri híbridas basada en Matlab, llamada SimHPN

Performance Bounds for Synchronized Queueing Networks

Las redes de Petri estocásticas constituyen un modelo unificado de las diferentes extensiones de redes de colas con sincronizaciones existentes en la literatura, válido para el diseño y análisis de prestaciones de sistemas informáticos distribuidos. En este trabajo se proponen técnicas de cálculo de cotas superiores e inferiores de las prestaciones de redes de Petri estocásticas en estado estacionario. Las cotas obtenidas son calculables en tiempo polinómico en el tamaño del modelo, por medio de la resolución de ciertos problemas de programación lineal definidos a partir de la matriz de incidencia de la red (en este sentido, las técnicas desarrolladas pueden considerarse estructurales). Las cotas calculadas dependen sólamente de los valores medios de las variables aleatorias que describen la temporización del sistema, y son independientes de los momentos de mayor orden. Esta independencia de la forma de las distribuciones de probabilidad asociadas puede considerarse como una útil generalización de otros resultados existentes para distribuciones particulares, puesto que los momentos de orden superior son, habitualmente, desconocidos en la realidad y difíciles de estimar. Finalmente, las técnicas desarrolladas se aplican al análisis de diferentes ejemplos tomados de la literatura sobre sistemas informáticos distribuidos y sistemas de fabricación. ******* Product form queueing networks have long been used for the performance evaluation of computer systems. Their success has been due to their capability of naturally expressing sharing of resources and queueing, that are typical situations of traditional computer systems, as well as to their efficient solution algorithms, of polynomial complexity on the size of the model. Unfortunately, the introduction of synchronization constraints usually destroys the product form solution, so that general concurrent and distributed systems are not easily studied with this class of models. Petri nets have been proved specially adequate to model parallel and distributed systems. Moreover, they have a well-founded theory of analysis that allows to investigate a great number of qualitative properties of the system. In the original definition, Petri nets did not include the notion of time, and tried to model only the logical behaviour of systems by describing the causal relations existing among events. This approach showed its power in the specification and analysis of concurrent systems in a way independent of the concept of time. Nevertheless the introduction of a timing specification is essential if we want to use this class of models for the performance evaluation of distributed systems. One of the main problems in the actual use of timed and stochastic Petri net models for the quantitative evaluation of large systems is the explosion of the computational complexity of the analysis algorithms. In general, exact performance results are obtained from the numerical solution of a continuous time Markov chain, whose dimension is given by the size of the state space of the model. Structural computation of exact performance measures has been possible for some subclasses of nets such as those with state machine topology. These nets, under certain assumptions on the stochastic interpretation are isomorphic to Gordon and Newell's networks, in queueing theory terminology. In the general case, efficient methods for the derivation of performance measures are still needed. Two complementary approaches to the derivation of exact measures for the analysis of distributed systems are the utilization of approximation techniques and the computation of bounds. Approximate values for the performance parameters are in general more efficiently derived than the exact ones. On the other hand, "exactness" only exists in theory! In other words, numerical algorithms must be applied in practice for the computation of exact values, therefore making errors is inevitable. Performance bounds are useful in the preliminary phases of the design of a system, in which many parameters are not known accurately. Several alternatives for those parameters should be quickly evaluated, and rejected those that are clearly bad. Exact (and even approximate) solutions would be computationally very expensive. Bounds become useful in these instances since they usually require much less computation effort. The computation of upper and lower bounds for the steady-state performance of timed and stochastic Petri nets is considered in this work. In particular, we study the throughput of transitions, defined as the average number of firings per time unit. For this measure we try to compute upper and lower bounds in polynomial time on the size of the net model, by means of proper linear programming problems defined from the incidence matrix of the net (in this sense, we develop structural techniques). These bounds depend only on the mean values and not on the higher moments of the probability distribution functions of the random variables that describe the timing of the system. The independence of the probability distributions can be viewed as a useful generalization of the performance results, since higher moments of the delays are usually unknown for real cases, and difficult to estimate and assess. From a different perspective, the obtained results can be applied to the analysis of queueing networks extended with some synchronization schemes. Monoclass queueing networks can be mapped on stochastic Petri nets. On the other hand, stochastic Petri nets can be interpreted as monoclass queueing networks augmented with synchronization primitives. Concerning the presentation of this manuscript, it should be mentioned that chapter 1 has been written with the object of giving the reader an outline of the stochastic Petri net model: its definition, terminology, basic properties, and related concepts, together with its deep relation with other classic stochastic network models. Chapter 2 is devoted to the presentation of the net subclasses considered in the rest of the work. The classification presented here is quite different from the one which is usual in the framework of Petri nets. The reason lies on the fact that our classification criterion, the computability of visit ratios for transitions, is introduced for the first time in the field of stochastic Petri nets in this work. The significance of that criterion is based on the important role that the visit ratios play in the computation of upper and lower bounds for the performance of the models. Nevertheless, classical important net subclasses are identified here in terms of the computability of their visit ratios from different parameters of the model. Chapter 3 is concerned with the computation of reachable upper and lower bounds for the most restrictive subclass of those presented in chapter 2: marked graphs. The explanation of this fact is easy to understand. The more simple is the model the more accessible will be the techniques an ideas for the development of good results. Chapter 4 provides a generalization for live and bounded free choice nets of the results presented in the previous chapter. Quality of obtained bounds is similar to that for strongly connected marked graphs: throughput lower bounds are reachable for bounded nets while upper bounds are reachable for 1-bounded nets. Chapter 5 considers the extension to other net subclasses, like mono-T-semiflow nets, FRT-nets, totally open deterministic systems of sequential processes, and persistent nets. The results are of diverse colours. For mono-T-semiflow nets and, therefore, for general FRT-nets, it is not possible (so far) to obtain reachable throughput bounds. On the other hand, for bounded ordinary persistent nets, tight throughput upper bounds are derived. Moreover, in the case of totally open deterministic systems of sequential processes the exact steady-state performance measures can be computed in polynomial time on the net size. In chapter 6 bounds for other interesting performance measures are derived from throughput bounds and from classical queueing theory laws. After that, we explore the introduction of more information from the probability distribution functions of service times in order to improve the bounds. In particular, for Coxian service delay of transitions it is possible to improve the throughput upper bounds of previous chapters which held for more general forms of distribution functions. This improvement shows to be specially fruitful for live and bounded free choice nets. Chapter 7 is devoted to case studies. Several examples taken from literature in the fields of distributed computing systems and manufacturing systems are modelled by means of stochastic Petri nets and evaluated using the techniques developed in previous chapters. Finally, some concluding remarks and considerations on possible extensions of the work are presented

Approximation methods for stochastic petri nets

Stochastic Marked Graphs are a concurrent decision free formalism provided with a powerful synchronization mechanism generalizing conventional Fork Join Queueing Networks. In some particular cases the analysis of the throughput can be done analytically. Otherwise the analysis suffers from the classical state explosion problem. Embedded in the divide and conquer paradigm, approximation techniques are introduced for the analysis of stochastic marked graphs and Macroplace/Macrotransition-nets (MPMT-nets), a new subclass introduced herein. MPMT-nets are a subclass of Petri nets that allow limited choice, concurrency and sharing of resources. The modeling power of MPMT is much larger than that of marked graphs, e.g., MPMT-nets can model manufacturing flow lines with unreliable machines and dataflow graphs where choice and synchronization occur. The basic idea leads to the notion of a cut to split the original net system into two subnets. The cuts lead to two aggregated net systems where one of the subnets is reduced to a single transition. A further reduction leads to a basic skeleton. The generalization of the idea leads to multiple cuts, where single cuts can be applied recursively leading to a hierarchical decomposition. Based on the decomposition, a response time approximation technique for the performance analysis is introduced. Also, delay equivalence, which has previously been introduced in the context of marked graphs by Woodside et al., Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's is slower, but the accuracy is generally better. Delay equivalence often fails to converge, while flow equivalent aggregation can lead to potentially bad results if a strong dependence of the mean completion time on the interarrival process exists

Modeling, evaluation, and control of a flexible manufacturing cell using petri nets

This thesis describes the usefulness of Petri nets in modeling, evaluating, and controlling a Flexible Manufacturing Cell (FMC). The basics of Petri net theory are explained and a specific FMC is examined. First, the FMC is modeled. The purpose of modeling is to facilitate the evaluation and provide a framework on which the control methodologies can be applied. The objective of the evaluation is to determine how the FMC would benefit most by replacing or adding equipment. Several ideas on control are combined to form a useful framework for the designing of the control net. With this framework the control net is developed directly from the Petri net used in the modeling and evaluation phases. Through the use of special symbols incorporated into the control net, the basic input and output requirements of the system can be derived from the graphical control net

Modeling of Yeast Pheromone Pathway using Petri Nets

Yeast (Saccharomyces cerevisiae) is one of the most widely studied single celled organisms. Mating of yeast cells occur between cells of opposite mating types a and alpha. Pheromone secretion by a cell alerts the corresponding opposite type cell about its presence and eventually facilitates the process of mating between them. The details of how pheromones affect cells can be studied from the pheromone response pathway in a yeast cell. A response pathway typically depicts the chain of interactions that happens between the different proteins in the cells in response to the pheromone. In this thesis we model the yeast pheromone response pathway using Petri nets and simulate various conditions under which a cell will respond positively to the secreted pheromone. We also take a look at how different proteins in the cell might be able to facilitate the correct functionality of the pathway. The objective of this thesis is to serve as a guideline for performing lab experiments to further explore the yeast pheromone pathway. Advisors: Stephen D. Scott and Jitender Singh Deogu

Applications of Petri nets

Thesis (Master)--Izmir Institute of Technology, Mathematics, Izmir, 2008Includes bibliographical references (leaves: 51-52)Text in English; Abstract: Turkish and Englishix, 52 leavesPetri nets are powerful formalism for modeling a wide range of dynamic systems and system behaviors. This thesis surveys the basic concept and application of Petri nets. The structure of Petri nets, their marking and execution and several examples of Petri net modeling. In this thesis we research into the analysis of Petri nets. Also we give the structure of Reachability graphs of Petri nets and their advantages for analyzing the Petri nets. The reachability problem for Petri nets is the problem of finding if Mn 2 R(M0) for a given marking Mn in a net (N,M0).We present several different kinds of Petri nets, together with computer tools based on Mathematica. We give the Mathematica commands for Reachability problem and also we created Mathematica commands for Incidence matrix of Petri nets. We study the concept of Petri nets and applications of Petri nets.We especially focus on Biological applications on Petri nets and we work on modeling of Hashimoto.s Thyroiditis in Petri Nets

Specification and Automatic Generation of Simulation Models with Applications in Semiconductor Manufacturing

The creation of large-scale simulation models is a difficult and time-consuming task. Yet simulation is one of the techniques most frequently used by practitioners in Operations Research and Industrial Engineering, as it is less limited by modeling assumptions than many analytical methods. The effective generation of simulation models is an important challenge. Due to the rapid increase in computing power, it is possible to simulate significantly larger systems than in the past. However, the verification and validation of these large-scale simulations is typically a very challenging task. This thesis introduces a simulation framework that can generate a large variety of manufacturing simulation models. These models have to be described with a simulation data specification. This specification is then used to generate a simulation model which is described as a Petri net. This approach reduces the effort of model verification. The proposed Petri net data structure has extensions for time and token priorities. Since it builds on existing theory for classical Petri nets, it is possible to make certain assertions about the behavior of the generated simulation model. The elements of the proposed framework and the simulation execution mechanism are described in detail. Measures of complexity for simulation models that are built with the framework are also developed. The applicability of the framework to real-world systems is demonstrated by means of a semiconductor manufacturing system simulation model.Ph.D.Committee Chair: Alexopoulos, Christos; Committee Co-Chair: McGinnis, Leon; Committee Member: Egerstedt, Magnus; Committee Member: Fujimoto, Richard; Committee Member: Goldsman, Davi

Recent advances in petri nets and concurrency

CEUR Workshop Proceeding