4,094 research outputs found
Crosstalk minimization of local channel routing algorithms in VLSI CAD
The greedy and left edge algorithms, as applied to local routing in VLSI CAD, were modified to decrease crosstalk between neighboring wires. The modifications on the algorithms use spacing, and segregation to improve the routing of wires in a channel. The modified greedy and left edge algorithms use a grid, but the minimum distance between two wires can be varied depending on the crosstalk between them. Crosstalk information must be obtained separately and is part of the required set of inputs to the algorithms. The improved algorithms route all the channel problems tested in less tracks than the original algorithms, if crosstalk constraints exist, and in the same number of tracks, if no crosstalk constraints exist
Automated routing and control of silicon photonic switch fabrics
Automatic reconfiguration and feedback controlled routing is demonstrated in an 8×8 silicon photonic switch fabric based on Mach-Zehnder interferometers. The use of non-invasive Contactless Integrated Photonic Probes (CLIPPs) enables real-time monitoring of the state of each switching element individually. Local monitoring provides direct information on the routing path, allowing an easy sequential tuning and feedback controlled stabilization of the individual switching elements, thus making the switch fabric robust against thermal crosstalk, even in the absence of a cooling system for the silicon chip. Up to 24 CLIPPs are interrogated by a multichannel integrated ASIC wire-bonded to the photonic chip. Optical routing is demonstrated on simultaneous WDM input signals that are labelled directly on-chip by suitable pilot tones without affecting the quality of the signals. Neither preliminary circuit calibration nor lookup tables are required, being the proposed control scheme inherently insensible to channels power fluctuations
1 x M packet-switched router based on the PPM header address for all-optical WDM networks
This paper presents an all-optical 1xM router architecture for simultaneous multiple-wavelength packet routing, without the need for wavelength conversion. The packet header address is based on the pulse position modulation (PPM) format, which allows the use of only a single-bitwise optical AND gate for fast packet header address correlation. The proposed scheme offers both multicast and broadcast capabilities. We’ve demonstrated a high speed packet routing at 160 Gb/s in simulation, with a low channel crosstalk (CXT) of ~ -27 dB with a channel spacing of > 0.4 THz and a demultiplexer bandwidth of 500 GHz. The output transfer function of the PPM header processing (PPM-HP) module is also investigated in this paper
An ultrafast 1 x M all-optical WDM packet-switched router based on the PPM header address
This paper presents an all-optical 1 x M WDM router architecture for packet routing at multiple wavelengths simultaneously, with no wavelength conversion modules. The packet header address adopted is based on the pulse position modulation (PPM) format, thus enabling the use of only a singlebitwise optical AND gate for fast header address correlation. It offers multicast as well as broadcast capabilities. It is shown that a high speed packet routing at 160 Gb/s can be achieved with a low channel crosstalk (CXT) of ~ -27 dB at a channel spacing of greater than 0.4 THz and a demultiplexer bandwidth of 500 GHz
BER performance analysis of 100 and 200 Gbit/s all-optical OTDM node using symmetric Mach-Zehnder switches
New insight to the feasibility of all-optical ultra speed switching up to 200 Gb/s. The technique will reduce the dependency and bottleneck on the electronic-to-optical-to-electronic conversion. Current conversion speed is up to 40 Gb/s in laboratories. The novel clock extraction technique proposed shows the potential of an all-optical switch. The research results are directly relevant to the access technology where optical fibre and RF is competing to be the solution. The growing demands of bandwidth will exceed RF capability while the optical fibre will be the optimum solution. A PhD project (Le-Minh) funded by the University Studentship, completed in 2007
Recommended from our members
Automatic synthesis of analog layout : a survey
A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon
Bitwise-based Routing Algorithms in Optical Multistage Interconnection Network
Recent advances in electro-optic technologies have made optical communication a
promising networking alternative to meet the ever increasing demands of high performance
computing communication applications for high channel bandwidth,
low communication latency and parallel processing as well. Optical Multistage
Interconnection Network (OMIN) is very popular in switching and communication
among other types of interconnection networks.
A major problem in OMIN is crosstalk, which is caused by coupling two signals
within a switching element. Crosstalk problem in a switch is the most prominent
factor which reduces the signal-to-noise ratio and restricts the size of network. To
avoid crosstalk in OMINs many algorithms have been proposed by many researchers
such as the Four Heuristic, Simulated Annealing, Genetic, Remove Last Passes and
Zero Algorithms. Under the constraint of avoiding crosstalk, the interests of these algorithms are to find a permutation that uses a minimum number of passes and
minimum execution time.
Accordingly the objective of this research is to optimize and improve the current
algorithms in terms of number of passes and execution time. To achieve such goal,
this research follows three approaches. In the first, the Improved Zero algorithm is
proposed to solve the problem and secondly, the Bitwise Improved Zero algorithm is
developed. Finally Four Heuristic and Difference Increasing and Decreasing routing
algorithms based on bitwise operation are established.
The results of this study show that Bitwise Improved Zero algorithms reduce the
execution time nearly seven times. This reduction is very considerable because the
execution time of routing algorithms is very important to route the messages in the
networks. Moreover Improved Zero algorithm was shown to be more accurate and
efficient compared to other algorithms in terms of the average number of passes and
execution time. Furthermore by converting Four Heuristic and Difference Increasing
and Decreasing routing algorithms to bitwise algorithms the execution time was
improved significantly
Optical multiple access techniques for on-board routing
The purpose of this research contract was to design and analyze an optical multiple access system, based on Code Division Multiple Access (CDMA) techniques, for on board routing applications on a future communication satellite. The optical multiple access system was to effect the functions of a circuit switch under the control of an autonomous network controller and to serve eight (8) concurrent users at a point to point (port to port) data rate of 180 Mb/s. (At the start of this program, the bit error rate requirement (BER) was undefined, so it was treated as a design variable during the contract effort.) CDMA was selected over other multiple access techniques because it lends itself to bursty, asynchronous, concurrent communication and potentially can be implemented with off the shelf, reliable optical transceivers compatible with long term unattended operations. Temporal, temporal/spatial hybrids and single pulse per row (SPR, sometimes termed 'sonar matrices') matrix types of CDMA designs were considered. The design, analysis, and trade offs required by the statement of work selected a temporal/spatial CDMA scheme which has SPR properties as the preferred solution. This selected design can be implemented for feasibility demonstration with off the shelf components (which are identified in the bill of materials of the contract Final Report). The photonic network architecture of the selected design is based on M(8,4,4) matrix codes. The network requires eight multimode laser transmitters with laser pulses of 0.93 ns operating at 180 Mb/s and 9-13 dBm peak power, and 8 PIN diode receivers with sensitivity of -27 dBm for the 0.93 ns pulses. The wavelength is not critical, but 830 nm technology readily meets the requirements. The passive optical components of the photonic network are all multimode and off the shelf. Bit error rate (BER) computations, based on both electronic noise and intercode crosstalk, predict a raw BER of (10 exp -3) when all eight users are communicating concurrently. If better BER performance is required, then error correction codes (ECC) using near term electronic technology can be used. For example, the M(8,4,4) optical code together with Reed-Solomon (54,38,8) encoding provides a BER of better than (10 exp -11). The optical transceiver must then operate at 256 Mb/s with pulses of 0.65 ns because the 'bits' are now channel symbols
- …