The GSFC Mark-2 three band hand-held radiometer

A self-contained, portable, hand-radiometer designed for field usage was constructed and tested. The device, consisting of a hand-held probe containing three sensors and a strap supported electronic module, weighs 4 1/2 kilograms. It is powered by flashlight and transistor radio batteries, utilizes two silicon and one lead sulfide detectors, has three liquid crystal displays, sample and hold radiometric sampling, and its spectral configuration corresponds to LANDSAT-D's thematic mapper bands. The device was designed to support thematic mapper ground-truth data collection efforts and to facilitate 'in situ' ground-based remote sensing studies of natural materials. Prototype instruments were extensively tested under laboratory and field conditions with excellent results

Measurement errors and implications for preprocessing in miniaturised near-infrared spectrometers: Classification of sweet and bitter almonds as a case of study

Near-infrared (NIR) spectroscopy is a well-established analytical technique that has been used in many applications over the years. Due to the advancements in the semiconductor industry, NIR instruments have evolved from benchtop instruments to miniaturised portable devices. The miniaturised NIR instruments have gained more interest in recent years because of the fast and robust measurements they provide with almost no sample pretreatments. However, due to the very different configurations and characteristics of these instruments, they need a dedicated optimization of the measurement conditions, which is crucial for obtaining reliable results. To comprehensively grasp the capabilities and potentials offered by these sensors, it is imperative to examine errors that can affect the raw data, which is a facet frequently overlooked. In this study, measurement error covariance and correlation matrices were calculated and then visually inspected to gain insight into the error structures associated with the devices, and to find the optimal preprocessing technique that may result in the improvement of the models built. This strategy was applied to the classification of sweet and bitter almonds, which were measured with the three portable low-cost NIR devices (SCiO, FlameNIR+ and NeoSpectra Micro Development Kit) after removing the shelled, since their classification is of utmost importance for the almond industry. The results showed that bitter almonds can be classified from sweet almonds using any of the instruments after selecting the optimal preprocessing, obtained through inspection of covariance and correlation matrices. Measurements obtained with FlameNIR + device provided the best classification models with an accuracy of 98 %. The chosen strategy provides new insight into the performance characterization of the fast-growing miniaturised NIR instruments

Smartphone-based food diagnostic technologies: A review

A new generation of mobile sensing approaches offers significant advantages over traditional platforms in terms of test speed, control, low cost, ease-of-operation, and data management, and requires minimal equipment and user involvement. The marriage of novel sensing technologies with cellphones enables the development of powerful lab-on-smartphone platforms for many important applications including medical diagnosis, environmental monitoring, and food safety analysis. This paper reviews the recent advancements and developments in the field of smartphone-based food diagnostic technologies, with an emphasis on custom modules to enhance smartphone sensing capabilities. These devices typically comprise multiple components such as detectors, sample processors, disposable chips, batteries and software, which are integrated with a commercial smartphone. One of the most important aspects of developing these systems is the integration of these components onto a compact and lightweight platform that requires minimal power. To date, researchers have demonstrated several promising approaches employing various sensing techniques and device configurations. We aim to provide a systematic classification according to the detection strategy, providing a critical discussion of strengths and weaknesses. We have also extended the analysis to the food scanning devices that are increasingly populating the Internet of Things (IoT) market, demonstrating how this field is indeed promising, as the research outputs are quickly capitalized on new start-up companies

A Probabilistic Model and Capturing Device for Remote Simultaneous Estimation of Spectral Emissivity and Temperature of Hot Emissive Materials

Estimating the temperature of hot emissive samples (e.g. liquid slag) in the context of harsh industrial environments such as steelmaking plants is a crucial yet challenging task, which is typically addressed by means of methods that require physical contact. Current remote methods require information on the emissivity of the sample. However, the spectral emissivity is dependent on the sample composition and temperature itself, and it is hardly measurable unless under controlled laboratory procedures. In this work, we present a portable device and associated probabilistic model that can simultaneously produce quasi real-time estimates for temperature and spectral emissivity of hot samples in the [0.2, 12.0μm ] range at distances of up to 20m . The model is robust against variable atmospheric conditions, and the device is presented together with a quick calibration procedure that allows for in field deployment in rough industrial environments, thus enabling in line measurements. We validate the temperature and emissivity estimates by our device against laboratory equipment under controlled conditions in the [550, 850∘C ] temperature range for two solid samples with well characterized spectral emissivity’s: alumina ( α−Al2O3 ) and hexagonal boron nitride ( h−BN ). The analysis of the results yields Root Mean Squared Errors of 32.3∘C and 5.7∘C respectively, and well correlated spectral emissivity’s.This work was supported in part by the Basque Government (Hazitek AURRERA B: Advanced and Useful REdesign of CSP process for new steel gRAdes) under Grant ZE-2017/00009

Benchmarking reconstructive spectrometer with multi-resonant cavities

Recent years have seen the rapid development of miniaturized reconstructive spectrometers (RSs), yet they still confront a range of technical challenges, such as bandwidth/resolution ratio, sensing speed, and/or power efficiency. Reported RS designs often suffer from insufficient decorrelation between sampling channels, which results in limited compressive sampling efficiency, in essence, due to inadequate engineering of sampling responses. This in turn leads to poor spectral-pixel-to-channel ratios (SPCRs), typically restricted at single digits. So far, there lacks a general guideline for manipulating RS sampling responses for the effectiveness of spectral information acquisition. In this study, we shed light on a fundamental parameter from the compressive sensing theory - the average mutual correlation coefficient v - and provide insight into how it serves as a critical benchmark in RS design with regards to the SPCR and reconstruction accuracy. To this end, we propose a novel RS design with multi-resonant cavities, consisting of a series of partial reflective interfaces. Such multi-cavity configuration offers an expansive parameter space, facilitating the superlative optimization of sampling matrices with minimized v. As a proof-of-concept demonstration, a single-shot, dual-band RS is implemented on a SiN platform, tailored for capturing signature spectral shapes across different wavelength regions, with customized photonic crystal nanobeam mirrors. Experimentally, the device demonstrates an overall operation bandwidth of 270 nm and a <0.5 nm resolution with only 15 sampling channels per band, leading to a record high SPCR of 18.0. Moreover, the proposed multi-cavity design can be readily adapted to various photonic platforms. For instance, we showcase that by employing multi-layer coatings, an ultra-broadband RS can be optimized to exhibit a 700 nm bandwidth with an SPCR of over 100

Radiometric calibration of the TreeTalker (TT+) spectrometer

Spectral raw data from the TreeTalker device are output as radiometrically uncalibratedand with the12 different spectral bandsnot directly comparableamong each other, hence hinderingthe retrieval of the real spectral signature from the observations. This report describes the methodology and results of experiments aimed at obtainingcustom calibration factors to convert the raw dataoutputfrom the TreeTalker spectrometer into values of radiative energy flux for each spectral band

Sparsity for Ultrafast Material Identification

Mid-infrared spectroscopy is often used to identify material. Thousands of spectral points are measured in a time-consuming process using expensive table-top instrument. However, material identification is a sparse problem, which in theory could be solved with just a few measurements. Here we exploit the sparsity of the problem and develop an ultra-fast, portable, and inexpensive method to identify materials. In a single-shot, a mid-infrared camera can identify materials based on their spectroscopic signatures. This method does not require prior calibration, making it robust and versatile in handling a broad range of materials

A multiband radiometer and data acquisition system for remote sensing field research

Specifications are described for a recently developed prototype multispectral data acquisition system which consists of multiband radiometer with 8 bands between 0.4 and 12.5 micrometers and a data recording module to record data from the radometer and ancillary sources. The systems is adaptable to helicopter, truck, or tripod platforms, as well as hand-held operation. The general characteristics are: (1) comparatively inexpensive to acquire, maintain and operate; (2) simple to operate and calibrate; (3) complete with data hardware and software; and (4) well documented for use by researchers. The instrument system is to be commercially available and can be utilized by many researchers to obtain large numbers of accurate, calibrated spectral measurements. It can be a key element in improving and advancing the capability for field research in remote sensing