EMERGING COMPUTING BASED NOVEL SOLUTIONS FOR DESIGN OF LOW POWER CIRCUITS

The growing applications for IoT devices have caused an increase in the study of low power consuming circuit design to meet the requirement of devices to operate for various months without external power supply. Scaling down the conventional CMOS causes various complications to design due to CMOS properties, therefore various non-conventional CMOS design techniques are being proposed that overcome the limitations. This thesis focuses on some of those emerging and novel low power design technique namely Adiabatic logic and low power devices like Magnetic Tunnel Junction (MTJ) and Carbon Nanotube Field Effect transistor (CNFET). Circuits that are used for large computations (multipliers, encryption engines) that amount to maximum part of power consumption in a whole chip are designed using these novel low power techniques

Novel Ternary Logic Gates Design in Nanoelectronics

In this paper, standard ternary logic gates are initially designed to considerably reduce static power consumption. This study proposes novel ternary gates based on two supply voltages in which the direct current is eliminated and the leakage current is reduced considerably. In addition, ST-OR and ST-AND are generated directly instead of ST-NAND and ST-NOR. The proposed gates have a high noise margin near V_(DD)/4. The simulation results indicated that the power consumption and PDP underwent a~sharp decrease and noise margin showed a considerable increase in comparison to both one supply and two supply based designs in previous works. PDP is improved in the proposed OR, as compared to one supply and two supply based previous works about 83% and 63%, respectively. Also, a memory cell is designed using the proposed STI logic gate, which has a considerably lower static power to store logic ‘1’ and the static noise margin, as compared to other designs

Graphene-based current mode logic circuits: a simulation study for an emerging technology

In this paper, the usage of graphene transistors is introduced to be a suitable solution for extending low power designs. Static and current mode logic (CML) styles on both nanoscale graphene and silicon FINFET technologies are compared. Results show that power in CML styles approximately are independent of frequency and the graphene-based CML (G-CML) designs are more power-efficient as the frequency and complexity increase. Compared to silicon-based CML (Si-CML) standard cells, there is 94% reduction in power consumption for G-CML counterparts. Furthermore, a G-CML 4-bit adder respectively offers 8.9 and 1.7 times less power and delay than the Si-CML adder

New Logic Synthesis As Nanotechnology Enabler (invited paper)

Nanoelectronics comprises a variety of devices whose electrical properties are more complex as compared to CMOS, thus enabling new computational paradigms. The potentially large space for innovation has to be explored in the search for technologies that can support large-scale and high- performance circuit design. Within this space, we analyze a set of emerging technologies characterized by a similar computational abstraction at the design level, i.e., a binary comparator or a majority voter. We demonstrate that new logic synthesis techniques, natively supporting this abstraction, are the technology enablers. We describe models and data-structures for logic design using emerging technologies and we show results of applying new synthesis algorithms and tools. We conclude that new logic synthesis methods are required to both evaluate emerging technologies and to achieve the best results in terms of area, power and performance

Multiple-valued logic: technology and circuit implementation

Title from PDF of title page, viewed March 1, 2023Dissertation advisors: Masud H. Chowdhury and Yugyung LeeVitaIncludes bibliographical references (pages 91-107)Dissertation (Ph.D.)--Department of Computer Science and Electrical Engineering. University of Missouri--Kansas City, 2021Computing technologies are currently based on the binary logic/number system, which is dependent on the simple on and off switching mechanism of the prevailing transistors. With the exponential increase of data processing and storage needs, there is a strong push to move to a higher radix logic/number system that can eradicate or lessen many limitations of the binary system. Anticipated saturation of Moore's law and the necessity to increase information density and processing speed in the future micro and nanoelectronic circuits and systems provide a strong background and motivation for the beyond-binary logic system. During this project, different technologies for Multiple-Valued-Logic (MVL) devices and the associated prospects and constraints are discussed. The feasibility of the MVL system in real-world applications rests on resolving two major challenges: (i) development of an efficient mathematical approach to implement the MVL logic using available technologies and (ii) availability of effective synthesis techniques. The main part of this project can be divided into two categories: (i) proposing different novel and efficient design for various logic and arithmetic circuits such as inverter, NAND, NOR, adder, multiplexer etc. (ii) proposing different fast and efficient design for various sequential and memory circuits. For the operation of the device, two of the very promising emerging technologies are used: Graphene Nanoribbon Field Effect Transistor (GNRFET) and Carbon Nano Tube Field Effect Transistor (CNTFET). A comparative analysis of the proposed designs and several state-of-the-art designs are also given in all the cases in terms of delay, total power, and power-delay-product (PDP). The simulation and analysis are performed using the H-SPICE tool with a GNRFET model available on the Nanohub website and CNTFET model available from Standford University website.Introduction -- Fundamentals and scope of multiple valued logic -- Technological aspect of multiple valued logic circuit -- Ternary logic gates using Graphene Nano Ribbon Field Effect Transistor (GNRFET) -- Ternary arithmetic circuits using Graphene Nano Ribbon Field Effect Transistor (GNRFET) -- Ternary sequential circuits using Graphene Nano Ribbon Field Effect Transistor (GNRFET) -- Ternary memory circuits using Carbon Nano Tube Field Effect Transistor (CNTFET) -- Conclusions & future wor

Technological Solution beyond MOSFET and Binary Logic Device

Title from PDF of title page viewed January 31, 2019Thesis advisor: Masud ChowdhuryVitaIncludes bibliographical references (pages 64-70)Thesis (M.S.)--School of Computing and Engineering, University of Missouri--Kansas City, 2018Today’s technology is based on the binary number system-based circuitry, which is the outcome of the simple on and off switching mechanism of the prevailing transistors. Consideration of higher radix number system can eradicate or lessen many limitations of binary number system such as the saturation of Moore’s law. The most substantial potential benefits of higher radix approaches are the decrease of wiring complexity. Excessive scaling of the technologies has led the researchers beyond Binary Logic and MOSFET technology. TFET considered as one of the most promising options for low-power application for beyond MOSFET technologies. Graphene Nano Ribbon, due to its high-carrier mobility, tunable bandgap and its outstanding electrostatic control of device gate becomes ideal choice for channel material of TFET. This paper proposes double gated ultra-thin body (UTB) TFET device model using Graphene nano ribbon as the channel material. In this paper evaluation of the model by performing the comparative analysis with InAs as the channel material in terms of Ec-Ev on and off state and Id-Vg characteristics is presented. The feasibility of multi valued logic system in real-world rests on two serious aspects, such as, the easiness of mathematical approach for implementing the multivalued logic into today’s technology and the sufficiency of synthesis techniques. In this paper, we have focused on the different technology available for implementing multivalued logic especially ternary logic. Ternary logic devices are expected to lead to an exponential increase of the information handling capability, which binary logic cannot support. Memory capacitor or memcapacitor is an emerging device that exhibits hysteresis behavior, which can be manipulated by external parameters, such as, the applied electric field or voltage. One of the unique properties of the memcapacitor is that by using the percolation approach, we can achieve Metal-Insulator-Transition (MIT) phenomenon, which can be utilized to obtain a staggered hysteresis loop. For multivalued logic devices staggered hysteresis behavior is the critical requirement. In this paper, we propose a new conceptual design of a ternary logic device by vertically stacking dielectric material interleaved with layers of graphene nanoribbon (GNR) between two external metal plates. The proposed device structure displays the memcapacitive behavior with the fast switching metal-to-insulator transition in picosecond scale. The device model is later extended into a vertical-cascaded version, which acts as a ternary device.Introduction -- Multi valued logic -- Overview of different MVL technologies -- Graphene memcapacitor based ternary logic device -- Graphene nano ribbon based TFET -- Conclusion and future wor