9,081 research outputs found
Textile Diamond Dipole and Artificial Magnetic Conductor Performance under Bending, Wetness and Specific Absorption Rate Measurements
Textile diamond dipole and Artificial Magnetic Conductor (AMC) have been proposed and tested under wearable and body centric measurements. The proposed antenna and AMC sheet are entirely made of textiles for both the substrate and conducting parts, thus making it suitable for wearable communications. Directive radiation patterns with high gain are obtained with the proposed AMC sheet, hence minimizing the radiation towards the human body. In this study, wearable and body centric measurements are investigated which include bending, wetness and Specific Absorption Rate (SAR). Bending is found not to give significant effect to the antenna and AMC performance, as opposed to wetness that yields severe performance distortion. However, the original performance is retrieved once the antenna and AMC dried. Moreover, notable SAR reduction is achieved with the introduction of the AMC sheet, which is appropriate to reduce the radiation that penetrates into human flesh
Analysis of Finite Microstrip Structures Using an Efficient Implementation of the Integral Equation Technique
An efficient numerical implementation of the Integral Equation technique (IE) has
been developed for the analysis of the electrical characteristics of finite microstrip structures.
The technique formulates a volume version of the IE for the finite dielectric objects, and a
standard surface IE technique for the metallic areas. The system of integral equations formu-
lated are solved with special numerical techniques described in this paper. The input impedances
of several microstrip antennas have been computed, showing good agreement with respect mea-
surements. The technique has shown to be accurate even for complex geometries containing
several stacked dielectric layers. The radiation patterns of the structures have also been com-
puted, and measured results from real manufactured hardware confirm that backside radiation
and secondary lobes are accurately predicted by the theoretical model. The paper also discuss
a suitable excitation model for finite size ground planes, and investigates the possibilities for
an independent meshing of the metallic areas and the dielectric objects inside a given geom-
etry. The practical value of the approach derived is that microstrip circuits can be designed
minimizing the volume and size of the dielectric substrates.This work has been supported bythe Spanish National Project ESP2001-4546-PE, and RegionalSeneca Project PB/4/FS/02
Magneto-Electric Dipole Antenna Arrays
A planar magneto-electric (ME) dipole antenna array is proposed and
demonstrated by both full-wave analysis and experiments. The proposed structure
leverages the infinite wavelength propagation characteristic of composite
right/left-handed (CRLH) transmission lines to form high-gain magnetic
radiators combined with radial conventional electric radiators, where the
overall structure is excited by a single differential feed. The traveling-wave
type nature of the proposed ME-dipole antenna enables the formation of
directive arrays with high-gain characteristics and scanning capability. Peak
gains of 10.84 dB and 5.73 dB are demonstrated for the electric dipole and
magnetic-dipole radiation components, respectively.Comment: 9 pages, 17 figure
Development of theoretical models of integrated millimeter wave antennas
Extensive radiation patterns for Linear Tapered Slot Antenna (LTSA) Single Elements are presented. The directivity of LTSA elements is predicted correctly by taking the cross polarized pattern into account. A moment method program predicts radiation patterns for air LTSAs with excellent agreement with experimental data. A moment method program was also developed for the task LTSA Array Modeling. Computations performed with this program are in excellent agreement with published results for dipole and monopole arrays, and with waveguide simulator experiments, for more complicated structures. Empirical modeling of LTSA arrays demonstrated that the maximum theoretical element gain can be obtained. Formulations were also developed for calculating the aperture efficiency of LTSA arrays used in reflector systems. It was shown that LTSA arrays used in multibeam systems have a considerable advantage in terms of higher packing density, compared with waveguide feeds. Conversion loss of 10 dB was demonstrated at 35 GHz
Electromagnetic scattering by impedance structures
The scattering of electromagnetic waves from impedance structures is investigated, and current work on antenna pattern calculation is presented. A general algorithm for determining radiation patterns from antennas mounted near or on polygonal plates is presented. These plates are assumed to be of a material which satisfies the Leontovich (or surface impedance) boundary condition. Calculated patterns including reflection and diffraction terms are presented for numerious geometries, and refinements are included for antennas mounted directly on impedance surfaces. For the case of a monopole mounted on a surface impedance ground plane, computed patterns are compared with experimental measurements. This work in antenna pattern prediction forms the basis of understanding of the complex scattering mechanisms from impedance surfaces. It provides the foundation for the analysis of backscattering patterns which, in general, are more problematic than calculation of antenna patterns. Further proposed study of related topics, including surface waves, corner diffractions, and multiple diffractions, is outlined
Broadband Application of High Impedance Ground Planes
Electrical conductors have long been the only materials available to antenna designers for reflecting structures. However, recently reported high impedance ground plane (HIGP) structures offer an alternative by creating image currents and reflections, within a limited frequency stop-band, that are in-phase with a source rather than out-of-phase as for a perfect electric conducting (PEC) surface. Also, the high impedance structures suppress surface waves while surface waves propagate on PEC surfaces. This research explores broadband antenna applications for HIGP structures. A broadband surface mount antenna is applied to both a homogeneous narrowband HIGP and a spatially varying broadband HIGP design. Measurements reveal the ground plane alters the fundamental radiating modes of the antenna and show high frequency regions of the ground plane short out low frequency energy in the antenna. Novel broadband integrated antenna/ground-plane structures are also introduced and analyzed. Basic high impedance elements are linked to form larger broadband antenna elements within the ground plane itself. The structure provides a passive-receive capability over a 9 to 1 bandwidth, is very light and thin, and offers straightforward flush-mounted integration on PEC surfaces
On the Accuracy of Equivalent Antenna Representations
The accuracy of two equivalent antenna representations, near-field sources
and far-field sources, are evaluated for an antenna installed on a simplified
platform in a series of case studies using different configurations of
equivalent antenna representations. The accuracy is evaluated in terms of
installed far-fields and surface currents on the platform. The results show
large variations between configurations. The root-mean-square installed
far-field error is 4.4% for the most accurate equivalent representation. When
using far-field sources, the design parameters have a large influence of the
achieved accuracy. There is also a varying accuracy depending on the type of
numerical method used. Based on the results, some recommendations on the choice
of sub-domain for the equivalent antenna representation are given. In
industrial antenna applications, the accuracy in determining e.g. installed
far-fields and antenna isolation on large platforms are critical. Equivalent
representations can reduce the fine-detail complexity of antennas and thus give
an efficient numerical descriptions to be used in large-scale simulations. The
results in this paper can be used as a guideline by antenna designers or system
engineers when using equivalent sources
Study and Design of a Diferentially Fed Tapered Slot Antenna Array
The results of a parametric study and design of an ultrawideband dual-polarized array of differentially-fed tapered slot antenna elements are presented. We examine arrays of bunny-ear antennas and discuss the capabilities and limitations of differential antenna technology. As we focus on radio astronomical applications, the absence of a balancing-feed circuit not only reduces the first-stage noise contribution associated to losses in the feed, but also leads to a cost reduction. Common-modes are supported by the antenna structure when a third conductor is present, such as a ground plane. We demonstrate that anomalies may occur in the differential-mode scan impedance. Knowledge of both types of scan impedances, differential and common mode, is required to properly design differential LNAs and to achieve optimal receiver sensitivity. A compromise solution is proposed based on the partial suppression of the undesired common-mode currents through a (low loss) balancing-dissipation technique. A fully steerable design up to 45?? in both principal planes is achieved
Deployable antenna phase A study
Applications for large deployable antennas were re-examined, flight demonstration objectives were defined, the flight article (antenna) was preliminarily designed, and the flight program and ground development program, including the support equipment, were defined for a proposed space transportation system flight experiment to demonstrate a large (50 to 200 meter) deployable antenna system. Tasks described include: (1) performance requirements analysis; (2) system design and definition; (3) orbital operations analysis; and (4) programmatic analysis
- …